From: Jiri Pirko Date: Thu, 10 Mar 2016 22:10:21 +0000 (+0100) Subject: mlxsw: pci: Implement reset done check X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=233fa44bd67a;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git mlxsw: pci: Implement reset done check Firmware now tells us that the reset is done by passing a magic value via register. Use it to shorten the wait in case this is supported. With old firmware, we still wait until the timeout is reached. Signed-off-by: Jiri Pirko Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.c b/drivers/net/ethernet/mellanox/mlxsw/pci.c index 7992c553c1f5..7f4173c8eda3 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.c +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.c @@ -1681,11 +1681,18 @@ static const struct mlxsw_bus mlxsw_pci_bus = { static int mlxsw_pci_sw_reset(struct mlxsw_pci *mlxsw_pci) { + unsigned long end; + mlxsw_pci_write32(mlxsw_pci, SW_RESET, MLXSW_PCI_SW_RESET_RST_BIT); - /* Current firware does not let us know when the reset is done. - * So we just wait here for constant time and hope for the best. - */ - msleep(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS); + wmb(); /* reset needs to be written before we read control register */ + end = jiffies + msecs_to_jiffies(MLXSW_PCI_SW_RESET_TIMEOUT_MSECS); + do { + u32 val = mlxsw_pci_read32(mlxsw_pci, FW_READY); + + if ((val & MLXSW_PCI_FW_READY_MASK) == MLXSW_PCI_FW_READY_MAGIC) + break; + cond_resched(); + } while (time_before(jiffies, end)); return 0; } diff --git a/drivers/net/ethernet/mellanox/mlxsw/pci.h b/drivers/net/ethernet/mellanox/mlxsw/pci.h index 912106054ff2..d942a3e6fa41 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/pci.h +++ b/drivers/net/ethernet/mellanox/mlxsw/pci.h @@ -61,6 +61,9 @@ #define MLXSW_PCI_SW_RESET 0xF0010 #define MLXSW_PCI_SW_RESET_RST_BIT BIT(0) #define MLXSW_PCI_SW_RESET_TIMEOUT_MSECS 5000 +#define MLXSW_PCI_FW_READY 0xA1844 +#define MLXSW_PCI_FW_READY_MASK 0xFF +#define MLXSW_PCI_FW_READY_MAGIC 0x5E #define MLXSW_PCI_DOORBELL_SDQ_OFFSET 0x000 #define MLXSW_PCI_DOORBELL_RDQ_OFFSET 0x200