From: Daniel Mack Date: Thu, 1 Jul 2010 04:19:31 +0000 (-0300) Subject: V4L/DVB: drivers/media/dvb/dvb-usb/dib0700: CodingStyle fixes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=230b27cd8e0494ecb463c0f3ae63d752c9d59666;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git V4L/DVB: drivers/media/dvb/dvb-usb/dib0700: CodingStyle fixes Signed-off-by: Daniel Mack Signed-off-by: Douglas Schilling Landgraf Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/dvb/dvb-usb/dib0700_core.c b/drivers/media/dvb/dvb-usb/dib0700_core.c index d2dabac9b63a..7deade7d1d23 100644 --- a/drivers/media/dvb/dvb-usb/dib0700_core.c +++ b/drivers/media/dvb/dvb-usb/dib0700_core.c @@ -53,7 +53,7 @@ static int dib0700_ctrl_wr(struct dvb_usb_device *d, u8 *tx, u8 txlen) int status; deb_data(">>> "); - debug_dump(tx,txlen,deb_data); + debug_dump(tx, txlen, deb_data); status = usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0), tx[0], USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, tx, txlen, @@ -98,7 +98,7 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen deb_info("ep 0 read error (status = %d)\n",status); deb_data("<<< "); - debug_dump(rx,rxlen,deb_data); + debug_dump(rx, rxlen, deb_data); return status; /* length in case of success */ } @@ -106,28 +106,29 @@ int dib0700_ctrl_rd(struct dvb_usb_device *d, u8 *tx, u8 txlen, u8 *rx, u8 rxlen int dib0700_set_gpio(struct dvb_usb_device *d, enum dib07x0_gpios gpio, u8 gpio_dir, u8 gpio_val) { u8 buf[3] = { REQUEST_SET_GPIO, gpio, ((gpio_dir & 0x01) << 7) | ((gpio_val & 0x01) << 6) }; - return dib0700_ctrl_wr(d,buf,3); + return dib0700_ctrl_wr(d, buf, sizeof(buf)); } static int dib0700_set_usb_xfer_len(struct dvb_usb_device *d, u16 nb_ts_packets) { - struct dib0700_state *st = d->priv; - u8 b[3]; - int ret; - - if (st->fw_version >= 0x10201) { - b[0] = REQUEST_SET_USB_XFER_LEN; - b[1] = (nb_ts_packets >> 8)&0xff; - b[2] = nb_ts_packets & 0xff; - - deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets); - - ret = dib0700_ctrl_wr(d, b, 3); - } else { - deb_info("this firmware does not allow to change the USB xfer len\n"); - ret = -EIO; - } - return ret; + struct dib0700_state *st = d->priv; + u8 b[3]; + int ret; + + if (st->fw_version >= 0x10201) { + b[0] = REQUEST_SET_USB_XFER_LEN; + b[1] = (nb_ts_packets >> 8) & 0xff; + b[2] = nb_ts_packets & 0xff; + + deb_info("set the USB xfer len to %i Ts packet\n", nb_ts_packets); + + ret = dib0700_ctrl_wr(d, b, sizeof(b)); + } else { + deb_info("this firmware does not allow to change the USB xfer len\n"); + ret = -EIO; + } + + return ret; } /* @@ -178,7 +179,8 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, value = ((en_start << 7) | (en_stop << 6) | (msg[i].len & 0x3F)) << 8 | i2c_dest; /* I2C ctrl + FE bus; */ - index = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30); + index = ((gen_mode << 6) & 0xC0) | + ((bus_mode << 4) & 0x30); result = usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev, 0), @@ -198,11 +200,12 @@ static int dib0700_i2c_xfer_new(struct i2c_adapter *adap, struct i2c_msg *msg, } else { /* Write request */ buf[0] = REQUEST_NEW_I2C_WRITE; - buf[1] = (msg[i].addr << 1); + buf[1] = msg[i].addr << 1; buf[2] = (en_start << 7) | (en_stop << 6) | (msg[i].len & 0x3F); /* I2C ctrl + FE bus; */ - buf[3] = ((gen_mode<<6)&0xC0) | ((bus_mode<<4)&0x30); + buf[3] = ((gen_mode << 6) & 0xC0) | + ((bus_mode << 4) & 0x30); /* The Actual i2c payload */ memcpy(&buf[4], msg[i].buf, msg[i].len); @@ -240,7 +243,7 @@ static int dib0700_i2c_xfer_legacy(struct i2c_adapter *adap, for (i = 0; i < num; i++) { /* fill in the address */ - buf[1] = (msg[i].addr << 1); + buf[1] = msg[i].addr << 1; /* fill the buffer */ memcpy(&buf[2], msg[i].buf, msg[i].len); @@ -368,7 +371,8 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw u8 buf[260]; while ((ret = dvb_usb_get_hexline(fw, &hx, &pos)) > 0) { - deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n",hx.addr, hx.len, hx.chk); + deb_fwdata("writing to address 0x%08x (buffer: 0x%02x %02x)\n", + hx.addr, hx.len, hx.chk); buf[0] = hx.len; buf[1] = (hx.addr >> 8) & 0xff; @@ -408,16 +412,16 @@ int dib0700_download_firmware(struct usb_device *udev, const struct firmware *fw REQUEST_GET_VERSION, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, b, sizeof(b), USB_CTRL_GET_TIMEOUT); - fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11]; + fw_version = (b[8] << 24) | (b[9] << 16) | (b[10] << 8) | b[11]; /* set the buffer size - DVB-USB is allocating URB buffers * only after the firwmare download was successful */ for (i = 0; i < dib0700_device_count; i++) { for (adap_num = 0; adap_num < dib0700_devices[i].num_adapters; adap_num++) { - if (fw_version >= 0x10201) + if (fw_version >= 0x10201) { dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = 188*nb_packet_buffer_size; - else { + } else { /* for fw version older than 1.20.1, * the buffersize has to be n times 512 */ dib0700_devices[i].adapter[adap_num].stream.u.bulk.buffersize = ((188*nb_packet_buffer_size+188/2)/512)*512; @@ -453,7 +457,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) if (st->disable_streaming_master_mode == 1) b[2] = 0x00; else - b[2] = (0x01 << 4); /* Master mode */ + b[2] = 0x01 << 4; /* Master mode */ b[3] = 0x00; @@ -466,7 +470,7 @@ int dib0700_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff) b[2] |= st->channel_state; - deb_info("data for streaming: %x %x\n",b[1],b[2]); + deb_info("data for streaming: %x %x\n", b[1], b[2]); return dib0700_ctrl_wr(adap->dev, b, 4); } @@ -631,7 +635,7 @@ resubmit: int dib0700_rc_setup(struct dvb_usb_device *d) { struct dib0700_state *st = d->priv; - u8 rc_setup[3] = {REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0}; + u8 rc_setup[3] = { REQUEST_SET_RC, dvb_usb_dib0700_ir_proto, 0 }; struct urb *purb; int ret; int i;