From: Hans de Goede Date: Sun, 8 Jun 2014 06:07:13 +0000 (-0700) Subject: Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=21baa4fe2760f7730fede13548b579a41498379d;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git Input: elantech - don't set bit 1 of reg_10 when the no_hw_res quirk is set commit fb4f8f568a9def02240ef9bf7aabd246dc63a081 upstream. The touchpad on the GIGABYTE U2442 not only stops communicating when we try to set bit 3 (enable real hardware resolution) of reg_10, but on some BIOS versions also when we set bit 1 (enable two finger mode auto correct). I've asked the original reporter of: https://bugzilla.kernel.org/show_bug.cgi?id=61151 To check that not setting bit 1 does not lead to any adverse effects on his model / BIOS revision, and it does not, so this commit fixes the touchpad not working on these versions by simply never setting bit 1 for laptop models with the no_hw_res quirk. Reported-and-tested-by: James Lademann Tested-by: Philipp Wolfer Signed-off-by: Hans de Goede Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 477b1d9861df..1913301df08f 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -819,7 +819,7 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse) if (etd->set_hw_resolution) etd->reg_10 = 0x0b; else - etd->reg_10 = 0x03; + etd->reg_10 = 0x01; if (elantech_write_reg(psmouse, 0x10, etd->reg_10)) rc = -1; @@ -1320,7 +1320,8 @@ static int elantech_reconnect(struct psmouse *psmouse) } /* - * Some hw_version 3 models go into error state when we try to set bit 3 of r10 + * Some hw_version 3 models go into error state when we try to set + * bit 3 and/or bit 1 of r10. */ static const struct dmi_system_id no_hw_res_dmi_table[] = { #if defined(CONFIG_DMI) && defined(CONFIG_X86)