From: Thomas Petazzoni Date: Wed, 6 Mar 2013 10:23:34 +0000 (+0100) Subject: arm: plat-orion: fix address decoding when > 4GB is used X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=217bef3d37a9180bebd1953dffb6f9a3c77c557f;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git arm: plat-orion: fix address decoding when > 4GB is used During the system initialization, the orion_setup_cpu_mbus_target() function reads the SDRAM address decoding registers to find out how many chip-selects of SDRAM have been enabled, and builds a small array with one entry per chip-select. This array is then used by device drivers (XOR, Ethernet, etc.) to configure their own address decoding windows to the SDRAM. However, devices can only access the first 32 bits of the physical memory. Even though LPAE is not supported for now, some Marvell boards are now showing up with 8 GB of RAM, configured using two SDRAM address decoding windows: the first covering the first 4 GB, the second covering the last 4 GB. The array built by orion_setup_cpu_mbus_target() has therefore two entries, and device drivers try to set up two address decoding windows to the SDRAM. However, in the device registers for the address decoding, the base address is only 32 bits, so those two windows overlap each other, and the devices do not work at all. This patch makes sure that the array built by orion_setup_cpu_mbus_target() only contains the SDRAM decoding windows that correspond to the first 4 GB of the memory. To do that, it ignores the SDRAM decoding windows for which the 4 low-order bits are not zero (the 4 low-order bits of the base register are used to store bits 32:35 of the base address, so they actually indicate whether the base address is above 4 GB). This patch allows the newly introduced armada-xp-gp board to properly operate when it is mounted with more than 4 GB of RAM. Without that, all devices doing DMA (for example XOR and Ethernet) do not work at all. Signed-off-by: Thomas Petazzoni Tested-by: Ezequiel Garcia Signed-off-by: Jason Cooper --- diff --git a/arch/arm/plat-orion/addr-map.c b/arch/arm/plat-orion/addr-map.c index febe3862873..807ac8e5cbc 100644 --- a/arch/arm/plat-orion/addr-map.c +++ b/arch/arm/plat-orion/addr-map.c @@ -157,9 +157,12 @@ void __init orion_setup_cpu_mbus_target(const struct orion_addr_map_cfg *cfg, u32 size = readl(ddr_window_cpu_base + DDR_SIZE_CS_OFF(i)); /* - * Chip select enabled? + * We only take care of entries for which the chip + * select is enabled, and that don't have high base + * address bits set (devices can only access the first + * 32 bits of the memory). */ - if (size & 1) { + if ((size & 1) && !(base & 0xF)) { struct mbus_dram_window *w; w = &orion_mbus_dram_info.cs[cs++];