From: John W. Linville Date: Wed, 10 Mar 2010 16:08:50 +0000 (-0500) Subject: ath5k: remove unused beacon timer code X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=200763bb7503102aa364658e2b32cb2463a08d91;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ath5k: remove unused beacon timer code Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath5k/ath5k.h b/drivers/net/wireless/ath/ath5k/ath5k.h index 365eccd777a3..1d7491c85460 100644 --- a/drivers/net/wireless/ath/ath5k/ath5k.h +++ b/drivers/net/wireless/ath/ath5k/ath5k.h @@ -613,28 +613,6 @@ struct ath5k_rx_status { #define AR5K_BEACON_ENA 0x00800000 /*enable beacon xmit*/ #define AR5K_BEACON_RESET_TSF 0x01000000 /*force a TSF reset*/ -#if 0 -/** - * struct ath5k_beacon_state - Per-station beacon timer state. - * @bs_interval: in TU's, can also include the above flags - * @bs_cfp_max_duration: if non-zero hw is setup to coexist with a - * Point Coordination Function capable AP - */ -struct ath5k_beacon_state { - u32 bs_next_beacon; - u32 bs_next_dtim; - u32 bs_interval; - u8 bs_dtim_period; - u8 bs_cfp_period; - u16 bs_cfp_max_duration; - u16 bs_cfp_du_remain; - u16 bs_tim_offset; - u16 bs_sleep_duration; - u16 bs_bmiss_threshold; - u32 bs_cfp_next; -}; -#endif - /* * TSF to TU conversion: @@ -1212,12 +1190,6 @@ u64 ath5k_hw_get_tsf64(struct ath5k_hw *ah); void ath5k_hw_set_tsf64(struct ath5k_hw *ah, u64 tsf64); void ath5k_hw_reset_tsf(struct ath5k_hw *ah); void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval); -#if 0 -int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, - const struct ath5k_beacon_state *state); -void ath5k_hw_reset_beacon(struct ath5k_hw *ah); -int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr); -#endif /* ACK bit rate */ void ath5k_hw_set_ack_bitrate_high(struct ath5k_hw *ah, bool high); /* Clock rate related functions */ diff --git a/drivers/net/wireless/ath/ath5k/pcu.c b/drivers/net/wireless/ath/ath5k/pcu.c index 9247123c9b6d..1b9fcb842167 100644 --- a/drivers/net/wireless/ath/ath5k/pcu.c +++ b/drivers/net/wireless/ath/ath5k/pcu.c @@ -648,203 +648,6 @@ void ath5k_hw_init_beacon(struct ath5k_hw *ah, u32 next_beacon, u32 interval) } -#if 0 -/* - * Set beacon timers - */ -int ath5k_hw_set_beacon_timers(struct ath5k_hw *ah, - const struct ath5k_beacon_state *state) -{ - u32 cfp_period, next_cfp, dtim, interval, next_beacon; - - /* - * TODO: should be changed through *state - * review struct ath5k_beacon_state struct - * - * XXX: These are used for cfp period bellow, are they - * ok ? Is it O.K. for tsf here to be 0 or should we use - * get_tsf ? - */ - u32 dtim_count = 0; /* XXX */ - u32 cfp_count = 0; /* XXX */ - u32 tsf = 0; /* XXX */ - - ATH5K_TRACE(ah->ah_sc); - /* Return on an invalid beacon state */ - if (state->bs_interval < 1) - return -EINVAL; - - interval = state->bs_interval; - dtim = state->bs_dtim_period; - - /* - * PCF support? - */ - if (state->bs_cfp_period > 0) { - /* - * Enable PCF mode and set the CFP - * (Contention Free Period) and timer registers - */ - cfp_period = state->bs_cfp_period * state->bs_dtim_period * - state->bs_interval; - next_cfp = (cfp_count * state->bs_dtim_period + dtim_count) * - state->bs_interval; - - AR5K_REG_ENABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, cfp_period, AR5K_CFP_PERIOD); - ath5k_hw_reg_write(ah, state->bs_cfp_max_duration, - AR5K_CFP_DUR); - ath5k_hw_reg_write(ah, (tsf + (next_cfp == 0 ? cfp_period : - next_cfp)) << 3, AR5K_TIMER2); - } else { - /* Disable PCF mode */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | - AR5K_STA_ID1_PCF); - } - - /* - * Enable the beacon timer register - */ - ath5k_hw_reg_write(ah, state->bs_next_beacon, AR5K_TIMER0); - - /* - * Start the beacon timers - */ - ath5k_hw_reg_write(ah, (ath5k_hw_reg_read(ah, AR5K_BEACON) & - ~(AR5K_BEACON_PERIOD | AR5K_BEACON_TIM)) | - AR5K_REG_SM(state->bs_tim_offset ? state->bs_tim_offset + 4 : 0, - AR5K_BEACON_TIM) | AR5K_REG_SM(state->bs_interval, - AR5K_BEACON_PERIOD), AR5K_BEACON); - - /* - * Write new beacon miss threshold, if it appears to be valid - * XXX: Figure out right values for min <= bs_bmiss_threshold <= max - * and return if its not in range. We can test this by reading value and - * setting value to a largest value and seeing which values register. - */ - - AR5K_REG_WRITE_BITS(ah, AR5K_RSSI_THR, AR5K_RSSI_THR_BMISS, - state->bs_bmiss_threshold); - - /* - * Set sleep control register - * XXX: Didn't find this in 5210 code but since this register - * exists also in ar5k's 5210 headers i leave it as common code. - */ - AR5K_REG_WRITE_BITS(ah, AR5K_SLEEP_CTL, AR5K_SLEEP_CTL_SLDUR, - (state->bs_sleep_duration - 3) << 3); - - /* - * Set enhanced sleep registers on 5212 - */ - if (ah->ah_version == AR5K_AR5212) { - if (state->bs_sleep_duration > state->bs_interval && - roundup(state->bs_sleep_duration, interval) == - state->bs_sleep_duration) - interval = state->bs_sleep_duration; - - if (state->bs_sleep_duration > dtim && (dtim == 0 || - roundup(state->bs_sleep_duration, dtim) == - state->bs_sleep_duration)) - dtim = state->bs_sleep_duration; - - if (interval > dtim) - return -EINVAL; - - next_beacon = interval == dtim ? state->bs_next_dtim : - state->bs_next_beacon; - - ath5k_hw_reg_write(ah, - AR5K_REG_SM((state->bs_next_dtim - 3) << 3, - AR5K_SLEEP0_NEXT_DTIM) | - AR5K_REG_SM(10, AR5K_SLEEP0_CABTO) | - AR5K_SLEEP0_ENH_SLEEP_EN | - AR5K_SLEEP0_ASSUME_DTIM, AR5K_SLEEP0); - - ath5k_hw_reg_write(ah, AR5K_REG_SM((next_beacon - 3) << 3, - AR5K_SLEEP1_NEXT_TIM) | - AR5K_REG_SM(10, AR5K_SLEEP1_BEACON_TO), AR5K_SLEEP1); - - ath5k_hw_reg_write(ah, - AR5K_REG_SM(interval, AR5K_SLEEP2_TIM_PER) | - AR5K_REG_SM(dtim, AR5K_SLEEP2_DTIM_PER), AR5K_SLEEP2); - } - - return 0; -} - -/* - * Reset beacon timers - */ -void ath5k_hw_reset_beacon(struct ath5k_hw *ah) -{ - ATH5K_TRACE(ah->ah_sc); - /* - * Disable beacon timer - */ - ath5k_hw_reg_write(ah, 0, AR5K_TIMER0); - - /* - * Disable some beacon register values - */ - AR5K_REG_DISABLE_BITS(ah, AR5K_STA_ID1, - AR5K_STA_ID1_DEFAULT_ANTENNA | AR5K_STA_ID1_PCF); - ath5k_hw_reg_write(ah, AR5K_BEACON_PERIOD, AR5K_BEACON); -} - -/* - * Wait for beacon queue to finish - */ -int ath5k_hw_beaconq_finish(struct ath5k_hw *ah, unsigned long phys_addr) -{ - unsigned int i; - int ret; - - ATH5K_TRACE(ah->ah_sc); - - /* 5210 doesn't have QCU*/ - if (ah->ah_version == AR5K_AR5210) { - /* - * Wait for beaconn queue to finish by checking - * Control Register and Beacon Status Register. - */ - for (i = AR5K_TUNE_BEACON_INTERVAL / 2; i > 0; i--) { - if (!(ath5k_hw_reg_read(ah, AR5K_BSR) & AR5K_BSR_TXQ1F) - || - !(ath5k_hw_reg_read(ah, AR5K_CR) & AR5K_BSR_TXQ1F)) - break; - udelay(10); - } - - /* Timeout... */ - if (i <= 0) { - /* - * Re-schedule the beacon queue - */ - ath5k_hw_reg_write(ah, phys_addr, AR5K_NOQCU_TXDP1); - ath5k_hw_reg_write(ah, AR5K_BCR_TQ1V | AR5K_BCR_BDMAE, - AR5K_BCR); - - return -EIO; - } - ret = 0; - } else { - /*5211/5212*/ - ret = ath5k_hw_register_timeout(ah, - AR5K_QUEUE_STATUS(AR5K_TX_QUEUE_ID_BEACON), - AR5K_QCU_STS_FRMPENDCNT, 0, false); - - if (AR5K_REG_READ_Q(ah, AR5K_QCU_TXE, AR5K_TX_QUEUE_ID_BEACON)) - return -EIO; - } - - return ret; -} -#endif - /*********************\ * Key table functions *