From: Fabio Estevam Date: Fri, 15 Jul 2016 13:53:02 +0000 (-0300) Subject: clk: imx7d: do not set the parent of IMX7D_ENET_AXI_ROOT_SRC X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1fd92dbaabe3096ded391eed2e8dd74afe02d0d2;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git clk: imx7d: do not set the parent of IMX7D_ENET_AXI_ROOT_SRC Booting the kernel on a imx7s-warp leads to several warnings like these: [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:3536 lock_release+0x2f8/0x330 [ 0.000000] releasing a pinned lock [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/locking/lockdep.c:2722 trace_hardirqs_on_caller+0x1ac/0x1f4 [ 0.000000] DEBUG_LOCKS_WARN_ON(unlikely(early_boot_irqs_disabled)) [ 0.000000] ---[ end trace cb88537fdc8fa201 ]--- [ 0.000000] bad: scheduling from the idle thread! [ 0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W 4.7.0-rc7-next-20160715 #404 [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/time/sched_clock.c:179 sched_clock_register+0x44/0x1f8 [ 0.000000] Modules linked in: [ 0.000591] ------------[ cut here ]------------ [ 0.000610] WARNING: CPU: 0 PID: 0 at kernel/time/sched_clock.c:179 sched_clock_register+0x44/0x1f8 [ 0.002084] ------------[ cut here ]------------ [ 0.002104] WARNING: CPU: 0 PID: 0 at init/main.c:576 start_kernel+0x258/0x3b0 [ 0.002114] Interrupts were enabled early This fix is along the same lines as 5e33ebff7edd ("clk: imx7d: do not set parent of ethernet time/ref clocks") and the explanation from that commit is: "The reason for the warning is that setting the parent enables the ENET PLL since we are using CLK_OPS_PARENT_ENABLE. Enabling the ENET PLL can cause clk_pllv3_wait_lock to sleep. See also: commit fc8726a2c021 ("clk: core: support clocks which requires parents enable (part 2)")." imx7s-warp does not even use the FEC interface, so we should not really configure the parent of IMX7D_ENET_AXI_ROOT_SRC in the common MX7 clock driver code. The dts file should use the assigned-clocks/assigned-clock-parents method, so simply remove the configuration of IMX7D_ENET_AXI_ROOT_SRC parent. Signed-off-by: Fabio Estevam Signed-off-by: Stephen Boyd --- diff --git a/drivers/clk/imx/clk-imx7d.c b/drivers/clk/imx/clk-imx7d.c index 6ed4f8fa0667..92579723afb0 100644 --- a/drivers/clk/imx/clk-imx7d.c +++ b/drivers/clk/imx/clk-imx7d.c @@ -860,8 +860,6 @@ static void __init imx7d_clocks_init(struct device_node *ccm_node) /* use old gpt clk setting, gpt1 root clk must be twice as gpt counter freq */ clk_set_parent(clks[IMX7D_GPT1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]); - clk_set_parent(clks[IMX7D_ENET_AXI_ROOT_SRC], clks[IMX7D_PLL_ENET_MAIN_250M_CLK]); - /* set uart module clock's parent clock source that must be great then 80MHz */ clk_set_parent(clks[IMX7D_UART1_ROOT_SRC], clks[IMX7D_OSC_24M_CLK]);