From: Graf Yang Date: Fri, 15 May 2009 11:01:59 +0000 (+0000) Subject: Blackfin: add support for gptimer0 as a tick source X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1fa9be72b558c39459f98835eb86dbb4ef4da30b;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git Blackfin: add support for gptimer0 as a tick source For systems where the core cycles are not a usable tick source (like SMP or cycles gets updated), enable gptimer0 as an alternative. Signed-off-by: Graf Yang Signed-off-by: Mike Frysinger --- diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index cea2bfd64a56..c04e7a4836f2 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -241,12 +241,6 @@ config IRQ_PER_CPU depends on SMP default y -config TICK_SOURCE_SYSTMR0 - bool - select BFIN_GPTIMERS - depends on SMP - default y - config BF_REV_MIN int default 0 if (BF51x || BF52x || (BF54x && !BF54xM)) @@ -607,7 +601,6 @@ source kernel/Kconfig.hz config GENERIC_TIME bool "Generic time" - depends on !SMP default y config GENERIC_CLOCKEVENTS @@ -615,12 +608,26 @@ config GENERIC_CLOCKEVENTS depends on GENERIC_TIME default y +choice + prompt "Kernel Tick Source" + depends on GENERIC_CLOCKEVENTS + default TICKSOURCE_CORETMR + +config TICKSOURCE_GPTMR0 + bool "Gptimer0 (SCLK domain)" + select BFIN_GPTIMERS + depends on !IPIPE + +config TICKSOURCE_CORETMR + bool "Core timer (CCLK domain)" + +endchoice + config CYCLES_CLOCKSOURCE - bool "Use 'CYCLES' as a clocksource (EXPERIMENTAL)" - depends on EXPERIMENTAL + bool "Use 'CYCLES' as a clocksource" depends on GENERIC_CLOCKEVENTS depends on !BFIN_SCRATCH_REG_CYCLES - default n + depends on !SMP help If you say Y here, you will enable support for using the 'cycles' registers as a clock source. Doing so means you will be unable to @@ -628,6 +635,11 @@ config CYCLES_CLOCKSOURCE still be able to read it (such as for performance monitoring), but writing the registers will most likely crash the kernel. +config GPTMR0_CLOCKSOURCE + bool "Use GPTimer0 as a clocksource (higher rating)" + depends on GENERIC_CLOCKEVENTS + depends on !TICKSOURCE_GPTMR0 + source kernel/time/Kconfig comment "Misc" diff --git a/arch/blackfin/include/asm/time.h b/arch/blackfin/include/asm/time.h index ddc43ce38533..589e937ed1eb 100644 --- a/arch/blackfin/include/asm/time.h +++ b/arch/blackfin/include/asm/time.h @@ -37,4 +37,5 @@ extern unsigned long long __bfin_cycles_off; extern unsigned int __bfin_cycles_mod; #endif +extern void __init setup_core_timer(void); #endif diff --git a/arch/blackfin/kernel/time-ts.c b/arch/blackfin/kernel/time-ts.c index 27646121280a..0791eba40d9f 100644 --- a/arch/blackfin/kernel/time-ts.c +++ b/arch/blackfin/kernel/time-ts.c @@ -20,8 +20,9 @@ #include #include +#include -#ifdef CONFIG_CYCLES_CLOCKSOURCE +#if defined(CONFIG_CYCLES_CLOCKSOURCE) /* Accelerators for sched_clock() * convert from cycles(64bits) => nanoseconds (64bits) @@ -58,15 +59,15 @@ static inline unsigned long long cycles_2_ns(cycle_t cyc) return (cyc * cyc2ns_scale) >> CYC2NS_SCALE_FACTOR; } -static cycle_t read_cycles(struct clocksource *cs) +static cycle_t bfin_read_cycles(struct clocksource *cs) { return __bfin_cycles_off + (get_cycles() << __bfin_cycles_mod); } -static struct clocksource clocksource_bfin = { - .name = "bfin_cycles", +static struct clocksource bfin_cs_cycles = { + .name = "bfin_cs_cycles", .rating = 350, - .read = read_cycles, + .read = bfin_read_cycles, .mask = CLOCKSOURCE_MASK(64), .shift = 22, .flags = CLOCK_SOURCE_IS_CONTINUOUS, @@ -74,53 +75,198 @@ static struct clocksource clocksource_bfin = { unsigned long long sched_clock(void) { - return cycles_2_ns(read_cycles(&clocksource_bfin)); + return cycles_2_ns(bfin_read_cycles(&bfin_cs_cycles)); } -static int __init bfin_clocksource_init(void) +static int __init bfin_cs_cycles_init(void) { set_cyc2ns_scale(get_cclk() / 1000); - clocksource_bfin.mult = clocksource_hz2mult(get_cclk(), clocksource_bfin.shift); + bfin_cs_cycles.mult = \ + clocksource_hz2mult(get_cclk(), bfin_cs_cycles.shift); - if (clocksource_register(&clocksource_bfin)) + if (clocksource_register(&bfin_cs_cycles)) panic("failed to register clocksource"); return 0; } +#else +# define bfin_cs_cycles_init() +#endif + +#ifdef CONFIG_GPTMR0_CLOCKSOURCE + +void __init setup_gptimer0(void) +{ + disable_gptimers(TIMER0bit); + + set_gptimer_config(TIMER0_id, \ + TIMER_OUT_DIS | TIMER_PERIOD_CNT | TIMER_MODE_PWM); + set_gptimer_period(TIMER0_id, -1); + set_gptimer_pwidth(TIMER0_id, -2); + SSYNC(); + enable_gptimers(TIMER0bit); +} + +static cycle_t bfin_read_gptimer0(void) +{ + return bfin_read_TIMER0_COUNTER(); +} + +static struct clocksource bfin_cs_gptimer0 = { + .name = "bfin_cs_gptimer0", + .rating = 400, + .read = bfin_read_gptimer0, + .mask = CLOCKSOURCE_MASK(32), + .shift = 22, + .flags = CLOCK_SOURCE_IS_CONTINUOUS, +}; + +static int __init bfin_cs_gptimer0_init(void) +{ + setup_gptimer0(); + bfin_cs_gptimer0.mult = \ + clocksource_hz2mult(get_sclk(), bfin_cs_gptimer0.shift); + + if (clocksource_register(&bfin_cs_gptimer0)) + panic("failed to register clocksource"); + + return 0; +} #else -# define bfin_clocksource_init() +# define bfin_cs_gptimer0_init() #endif +#ifdef CONFIG_CORE_TIMER_IRQ_L1 +__attribute__((l1_text)) +#endif +irqreturn_t timer_interrupt(int irq, void *dev_id); + +static int bfin_timer_set_next_event(unsigned long, \ + struct clock_event_device *); + +static void bfin_timer_set_mode(enum clock_event_mode, \ + struct clock_event_device *); + +static struct clock_event_device clockevent_bfin = { +#if defined(CONFIG_TICKSOURCE_GPTMR0) + .name = "bfin_gptimer0", + .rating = 300, + .irq = IRQ_TIMER0, +#else + .name = "bfin_core_timer", + .rating = 350, + .irq = IRQ_CORETMR, +#endif + .shift = 32, + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_next_event = bfin_timer_set_next_event, + .set_mode = bfin_timer_set_mode, +}; + +static struct irqaction bfin_timer_irq = { +#if defined(CONFIG_TICKSOURCE_GPTMR0) + .name = "Blackfin GPTimer0", +#else + .name = "Blackfin CoreTimer", +#endif + .flags = IRQF_DISABLED | IRQF_TIMER | \ + IRQF_IRQPOLL | IRQF_PERCPU, + .handler = timer_interrupt, + .dev_id = &clockevent_bfin, +}; + +#if defined(CONFIG_TICKSOURCE_GPTMR0) static int bfin_timer_set_next_event(unsigned long cycles, struct clock_event_device *evt) { + disable_gptimers(TIMER0bit); + + /* it starts counting three SCLK cycles after the TIMENx bit is set */ + set_gptimer_pwidth(TIMER0_id, cycles - 3); + enable_gptimers(TIMER0bit); + return 0; +} + +static void bfin_timer_set_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ + switch (mode) { + case CLOCK_EVT_MODE_PERIODIC: { + set_gptimer_config(TIMER0_id, \ + TIMER_OUT_DIS | TIMER_IRQ_ENA | \ + TIMER_PERIOD_CNT | TIMER_MODE_PWM); + set_gptimer_period(TIMER0_id, get_sclk() / HZ); + set_gptimer_pwidth(TIMER0_id, get_sclk() / HZ - 1); + enable_gptimers(TIMER0bit); + break; + } + case CLOCK_EVT_MODE_ONESHOT: + disable_gptimers(TIMER0bit); + set_gptimer_config(TIMER0_id, \ + TIMER_OUT_DIS | TIMER_IRQ_ENA | TIMER_MODE_PWM); + set_gptimer_period(TIMER0_id, 0); + break; + case CLOCK_EVT_MODE_UNUSED: + case CLOCK_EVT_MODE_SHUTDOWN: + disable_gptimers(TIMER0bit); + break; + case CLOCK_EVT_MODE_RESUME: + break; + } +} + +static void bfin_timer_ack(void) +{ + set_gptimer_status(TIMER_GROUP1, TIMER_STATUS_TIMIL0); +} + +static void __init bfin_timer_init(void) +{ + disable_gptimers(TIMER0bit); +} + +static unsigned long __init bfin_clockevent_check(void) +{ + setup_irq(IRQ_TIMER0, &bfin_timer_irq); + return get_sclk(); +} + +#else /* CONFIG_TICKSOURCE_CORETMR */ + +static int bfin_timer_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + bfin_write_TCNTL(TMPWR); + CSYNC(); bfin_write_TCOUNT(cycles); CSYNC(); + bfin_write_TCNTL(TMPWR | TMREN); return 0; } static void bfin_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *evt) + struct clock_event_device *evt) { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: { unsigned long tcount = ((get_cclk() / (HZ * TIME_SCALE)) - 1); bfin_write_TCNTL(TMPWR); - bfin_write_TSCALE(TIME_SCALE - 1); CSYNC(); + bfin_write_TSCALE(TIME_SCALE - 1); bfin_write_TPERIOD(tcount); bfin_write_TCOUNT(tcount); - bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD); CSYNC(); + bfin_write_TCNTL(TMPWR | TMREN | TAUTORLD); break; } case CLOCK_EVT_MODE_ONESHOT: + bfin_write_TCNTL(TMPWR); + CSYNC(); bfin_write_TSCALE(TIME_SCALE - 1); + bfin_write_TPERIOD(0); bfin_write_TCOUNT(0); - bfin_write_TCNTL(TMPWR | TMREN); - CSYNC(); break; case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: @@ -132,6 +278,10 @@ static void bfin_timer_set_mode(enum clock_event_mode mode, } } +static void bfin_timer_ack(void) +{ +} + static void __init bfin_timer_init(void) { /* power up the timer, but don't enable it just yet */ @@ -145,38 +295,32 @@ static void __init bfin_timer_init(void) bfin_write_TPERIOD(0); bfin_write_TCOUNT(0); - /* now enable the timer */ CSYNC(); } +static unsigned long __init bfin_clockevent_check(void) +{ + setup_irq(IRQ_CORETMR, &bfin_timer_irq); + return get_cclk() / TIME_SCALE; +} + +void __init setup_core_timer(void) +{ + bfin_timer_init(); + bfin_timer_set_mode(CLOCK_EVT_MODE_PERIODIC, NULL); +} +#endif /* CONFIG_TICKSOURCE_GPTMR0 */ + /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -#ifdef CONFIG_CORE_TIMER_IRQ_L1 -__attribute__((l1_text)) -#endif -irqreturn_t timer_interrupt(int irq, void *dev_id); - -static struct clock_event_device clockevent_bfin = { - .name = "bfin_core_timer", - .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, - .shift = 32, - .set_next_event = bfin_timer_set_next_event, - .set_mode = bfin_timer_set_mode, -}; - -static struct irqaction bfin_timer_irq = { - .name = "Blackfin Core Timer", - .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL, - .handler = timer_interrupt, - .dev_id = &clockevent_bfin, -}; - irqreturn_t timer_interrupt(int irq, void *dev_id) { struct clock_event_device *evt = dev_id; + smp_mb(); evt->event_handler(evt); + bfin_timer_ack(); return IRQ_HANDLED; } @@ -184,9 +328,8 @@ static int __init bfin_clockevent_init(void) { unsigned long timer_clk; - timer_clk = get_cclk() / TIME_SCALE; + timer_clk = bfin_clockevent_check(); - setup_irq(IRQ_CORETMR, &bfin_timer_irq); bfin_timer_init(); clockevent_bfin.mult = div_sc(timer_clk, NSEC_PER_SEC, clockevent_bfin.shift); @@ -218,6 +361,7 @@ void __init time_init(void) xtime.tv_nsec = 0; set_normalized_timespec(&wall_to_monotonic, -xtime.tv_sec, -xtime.tv_nsec); - bfin_clocksource_init(); + bfin_cs_cycles_init(); + bfin_cs_gptimer0_init(); bfin_clockevent_init(); } diff --git a/arch/blackfin/kernel/time.c b/arch/blackfin/kernel/time.c index 1bbacfbd4c5d..daa02d45f03d 100644 --- a/arch/blackfin/kernel/time.c +++ b/arch/blackfin/kernel/time.c @@ -31,7 +31,7 @@ static struct irqaction bfin_timer_irq = { #endif }; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE) void __init setup_system_timer0(void) { /* Power down the core timer, just to play safe. */ @@ -74,7 +74,7 @@ void __init setup_core_timer(void) static void __init time_sched_init(irqreturn_t(*timer_routine) (int, void *)) { -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE) setup_system_timer0(); bfin_timer_irq.handler = timer_routine; setup_irq(IRQ_TIMER0, &bfin_timer_irq); @@ -94,7 +94,7 @@ static unsigned long gettimeoffset(void) unsigned long offset; unsigned long clocks_per_jiffy; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) || defined(CONFIG_IPIPE) clocks_per_jiffy = bfin_read_TIMER0_PERIOD(); offset = bfin_read_TIMER0_COUNTER() / \ (((clocks_per_jiffy + 1) * HZ) / USEC_PER_SEC); @@ -133,7 +133,7 @@ irqreturn_t timer_interrupt(int irq, void *dummy) static long last_rtc_update; write_seqlock(&xtime_lock); -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) && !defined(CONFIG_IPIPE) /* * TIMIL0 is latched in __ipipe_grab_irq() when the I-Pipe is * enabled. @@ -159,7 +159,7 @@ irqreturn_t timer_interrupt(int irq, void *dummy) /* Do it again in 60s. */ last_rtc_update = xtime.tv_sec - 600; } -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) && !defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) && !defined(CONFIG_IPIPE) set_gptimer_status(0, TIMER_STATUS_TIMIL0); } #endif diff --git a/arch/blackfin/mach-bf518/Kconfig b/arch/blackfin/mach-bf518/Kconfig index f397ede006bf..4c76fefb7a3b 100644 --- a/arch/blackfin/mach-bf518/Kconfig +++ b/arch/blackfin/mach-bf518/Kconfig @@ -156,6 +156,7 @@ config IRQ_PORTH_INTB default 11 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf527/Kconfig b/arch/blackfin/mach-bf527/Kconfig index 8438ec6d6679..848ac6f86823 100644 --- a/arch/blackfin/mach-bf527/Kconfig +++ b/arch/blackfin/mach-bf527/Kconfig @@ -170,6 +170,7 @@ config IRQ_PORTH_INTB default 11 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf533/Kconfig b/arch/blackfin/mach-bf533/Kconfig index 14427de7d77f..4c572443147e 100644 --- a/arch/blackfin/mach-bf533/Kconfig +++ b/arch/blackfin/mach-bf533/Kconfig @@ -59,6 +59,7 @@ config DMA7_UARTTX default 10 config TIMER0 int "TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config TIMER1 int "TIMER1" diff --git a/arch/blackfin/mach-bf537/Kconfig b/arch/blackfin/mach-bf537/Kconfig index bbc08fd4f122..d81224f9d723 100644 --- a/arch/blackfin/mach-bf537/Kconfig +++ b/arch/blackfin/mach-bf537/Kconfig @@ -66,6 +66,7 @@ config IRQ_MAC_TX default 11 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf538/Kconfig b/arch/blackfin/mach-bf538/Kconfig index f068c3523cdc..2d280f504ab0 100644 --- a/arch/blackfin/mach-bf538/Kconfig +++ b/arch/blackfin/mach-bf538/Kconfig @@ -57,6 +57,7 @@ config IRQ_UART0_TX default 10 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf548/Kconfig b/arch/blackfin/mach-bf548/Kconfig index 8d24eaabe589..a09623dfd550 100644 --- a/arch/blackfin/mach-bf548/Kconfig +++ b/arch/blackfin/mach-bf548/Kconfig @@ -257,6 +257,7 @@ config IRQ_OTPSEC default 11 config IRQ_TIMER0 int "IRQ_TIMER0" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "IRQ_TIMER1" diff --git a/arch/blackfin/mach-bf561/Kconfig b/arch/blackfin/mach-bf561/Kconfig index 6965dd59af4c..cb9743641511 100644 --- a/arch/blackfin/mach-bf561/Kconfig +++ b/arch/blackfin/mach-bf561/Kconfig @@ -125,6 +125,7 @@ config IRQ_DMA2_11 default 9 config IRQ_TIMER0 int "TIMER 0 Interrupt" + default 7 if TICKSOURCE_GPTMR0 default 8 config IRQ_TIMER1 int "TIMER 1 Interrupt" diff --git a/arch/blackfin/mach-bf561/smp.c b/arch/blackfin/mach-bf561/smp.c index 4ea13d2eb872..8c10701c251f 100644 --- a/arch/blackfin/mach-bf561/smp.c +++ b/arch/blackfin/mach-bf561/smp.c @@ -133,7 +133,7 @@ void __init platform_request_ipi(irq_handler_t handler) int ret; ret = request_irq(IRQ_SUPPLE_0, handler, IRQF_DISABLED, - "SMP interrupt", handler); + "Supplemental Interrupt0", handler); if (ret) panic("Cannot request supplemental interrupt 0 for IPI service"); } diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 389c5e8aa456..6e808612d170 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -1052,7 +1052,7 @@ int __init init_arch_irq(void) set_irq_chained_handler(irq, bfin_demux_error_irq); break; #endif -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) case IRQ_TIMER0: set_irq_handler(irq, handle_percpu_irq); break; @@ -1232,13 +1232,9 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) if (likely(vec == EVT_IVTMR_P)) { irq = IRQ_CORETMR; - goto core_tick; - } - - SSYNC(); + } else { #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - { unsigned long sic_status[3]; sic_status[0] = bfin_read_SIC_ISR0() & bfin_read_SIC_IMASK0(); @@ -1254,9 +1250,7 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) if (sic_status[(ivg->irqno - IVG7) / 32] & ivg->isrflag) break; } - } #else - { unsigned long sic_status; sic_status = bfin_read_SIC_IMASK() & bfin_read_SIC_ISR(); @@ -1268,15 +1262,13 @@ asmlinkage int __ipipe_grab_irq(int vec, struct pt_regs *regs) } else if (sic_status & ivg->isrflag) break; } - } #endif - irq = ivg->irqno; + irq = ivg->irqno; + } if (irq == IRQ_SYSTMR) { -#ifdef CONFIG_GENERIC_CLOCKEVENTS -core_tick: -#else +#ifndef CONFIG_GENERIC_CLOCKEVENTS bfin_write_TIMER_STATUS(1); /* Latch TIMIL0 */ #endif /* This is basically what we need from the register frame. */ @@ -1288,9 +1280,6 @@ core_tick: __raw_get_cpu_var(__ipipe_tick_regs).ipend |= 0x10; } -#ifndef CONFIG_GENERIC_CLOCKEVENTS -core_tick: -#endif if (this_domain == ipipe_root_domain) { s = __test_and_set_bit(IPIPE_SYNCDEFER_FLAG, &p->status); barrier(); @@ -1308,7 +1297,7 @@ core_tick: } } - return 0; + return 0; } #endif /* CONFIG_IPIPE */ diff --git a/arch/blackfin/mach-common/smp.c b/arch/blackfin/mach-common/smp.c index 187c79e585a1..b6695957b065 100644 --- a/arch/blackfin/mach-common/smp.c +++ b/arch/blackfin/mach-common/smp.c @@ -43,6 +43,7 @@ #include #include #include +#include #include /* @@ -356,7 +357,7 @@ int __cpuinit __cpu_up(unsigned int cpu) static void __cpuinit setup_secondary(unsigned int cpu) { -#if !(defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE)) +#if !defined(CONFIG_TICKSOURCE_GPTMR0) struct irq_desc *timer_desc; #endif unsigned long ilat; @@ -377,7 +378,7 @@ static void __cpuinit setup_secondary(unsigned int cpu) IMASK_IVG14 | IMASK_IVG13 | IMASK_IVG12 | IMASK_IVG11 | IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; -#if defined(CONFIG_TICK_SOURCE_SYSTMR0) || defined(CONFIG_IPIPE) +#if defined(CONFIG_TICKSOURCE_GPTMR0) /* Power down the core timer, just to play safe. */ bfin_write_TCNTL(0);