From: Roland Dreier Date: Fri, 28 Mar 2008 17:28:17 +0000 (-0700) Subject: RDMA/cxgb3: Program hardware IRD with correct value X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1f71f50342c6fe4fbdebe63b0fd196972a70e281;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git RDMA/cxgb3: Program hardware IRD with correct value Because of a typo in iwch_accept_cr(), the cxgb3 connection handling code programs the hardware IRD (incoming RDMA read queue depth) with the value that is passed in for the ORD (outgoing RDMA read queue depth). In particular this means that if an application passes in IRD > 0 and ORD = 0 (which is a completely sane and valid thing to do for an app that expects only incoming RDMA read requests), then the hardware will end up programmed with IRD = 0 and the app will fail in a mysterious way. Fix this by using "ep->ird" instead of "ep->ord" in the intended place. Signed-off-by: Roland Dreier Acked-by: Steve Wise Signed-off-by: Linus Torvalds --- diff --git a/drivers/infiniband/hw/cxgb3/iwch_cm.c b/drivers/infiniband/hw/cxgb3/iwch_cm.c index 320f2b6ddee6..99f2f2a46bf7 100644 --- a/drivers/infiniband/hw/cxgb3/iwch_cm.c +++ b/drivers/infiniband/hw/cxgb3/iwch_cm.c @@ -1745,7 +1745,7 @@ int iwch_accept_cr(struct iw_cm_id *cm_id, struct iw_cm_conn_param *conn_param) /* bind QP to EP and move to RTS */ attrs.mpa_attr = ep->mpa_attr; - attrs.max_ird = ep->ord; + attrs.max_ird = ep->ird; attrs.max_ord = ep->ord; attrs.llp_stream_handle = ep; attrs.next_state = IWCH_QP_STATE_RTS;