From: Yoichi Yuasa Date: Thu, 7 Jun 2007 13:27:50 +0000 (+0900) Subject: [MIPS] Remove unused time.c for swarm X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1f2c6d6b0c553e44273aaee24820c67ebfbbfebe;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git [MIPS] Remove unused time.c for swarm Signed-off-by: Yoichi Yuasa Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/sibyte/swarm/time.c b/arch/mips/sibyte/swarm/time.c deleted file mode 100644 index 97c73c793c35..000000000000 --- a/arch/mips/sibyte/swarm/time.c +++ /dev/null @@ -1,244 +0,0 @@ -/* - * Copyright (C) 2000, 2001 Broadcom Corporation - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -/* - * Time routines for the swarm board. We pass all the hard stuff - * through to the sb1250 handling code. Only thing we really keep - * track of here is what time of day we think it is. And we don't - * really even do a good job of that... - */ - - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -static unsigned long long sec_bias = 0; -static unsigned int usec_bias = 0; - -/* Xicor 1241 definitions */ - -/* - * Register bits - */ - -#define X1241REG_SR_BAT 0x80 /* currently on battery power */ -#define X1241REG_SR_RWEL 0x04 /* r/w latch is enabled, can write RTC */ -#define X1241REG_SR_WEL 0x02 /* r/w latch is unlocked, can enable r/w now */ -#define X1241REG_SR_RTCF 0x01 /* clock failed */ -#define X1241REG_BL_BP2 0x80 /* block protect 2 */ -#define X1241REG_BL_BP1 0x40 /* block protect 1 */ -#define X1241REG_BL_BP0 0x20 /* block protect 0 */ -#define X1241REG_BL_WD1 0x10 -#define X1241REG_BL_WD0 0x08 -#define X1241REG_HR_MIL 0x80 /* military time format */ - -/* - * Register numbers - */ - -#define X1241REG_BL 0x10 /* block protect bits */ -#define X1241REG_INT 0x11 /* */ -#define X1241REG_SC 0x30 /* Seconds */ -#define X1241REG_MN 0x31 /* Minutes */ -#define X1241REG_HR 0x32 /* Hours */ -#define X1241REG_DT 0x33 /* Day of month */ -#define X1241REG_MO 0x34 /* Month */ -#define X1241REG_YR 0x35 /* Year */ -#define X1241REG_DW 0x36 /* Day of Week */ -#define X1241REG_Y2K 0x37 /* Year 2K */ -#define X1241REG_SR 0x3F /* Status register */ - -#define X1241_CCR_ADDRESS 0x6F - -#define SMB_CSR(reg) (IOADDR(A_SMB_REGISTER(1, reg))) - -static int xicor_read(uint8_t addr) -{ - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - __raw_writeq((addr >> 8) & 0x7, SMB_CSR(R_SMB_CMD)); - __raw_writeq(addr & 0xff, SMB_CSR(R_SMB_DATA)); - __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR2BYTE, - SMB_CSR(R_SMB_START)); - - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_RD1BYTE, - SMB_CSR(R_SMB_START)); - - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { - /* Clear error bit by writing a 1 */ - __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); - return -1; - } - - return (__raw_readq(SMB_CSR(R_SMB_DATA)) & 0xff); -} - -static int xicor_write(uint8_t addr, int b) -{ - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - __raw_writeq(addr, SMB_CSR(R_SMB_CMD)); - __raw_writeq((addr & 0xff) | ((b & 0xff) << 8), SMB_CSR(R_SMB_DATA)); - __raw_writeq(V_SMB_ADDR(X1241_CCR_ADDRESS) | V_SMB_TT_WR3BYTE, - SMB_CSR(R_SMB_START)); - - while (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_BUSY) - ; - - if (__raw_readq(SMB_CSR(R_SMB_STATUS)) & M_SMB_ERROR) { - /* Clear error bit by writing a 1 */ - __raw_writeq(M_SMB_ERROR, SMB_CSR(R_SMB_STATUS)); - return -1; - } else { - return 0; - } -} - -/* - * In order to set the CMOS clock precisely, set_rtc_mmss has to be - * called 500 ms after the second nowtime has started, because when - * nowtime is written into the registers of the CMOS clock, it will - * jump to the next second precisely 500 ms later. Check the Motorola - * MC146818A or Dallas DS12887 data sheet for details. - * - * BUG: This routine does not handle hour overflow properly; it just - * sets the minutes. Usually you'll only notice that after reboot! - */ -int set_rtc_mmss(unsigned long nowtime) -{ - int retval = 0; - int real_seconds, real_minutes, cmos_minutes; - - cmos_minutes = xicor_read(X1241REG_MN); - cmos_minutes = BCD2BIN(cmos_minutes); - - /* - * since we're only adjusting minutes and seconds, - * don't interfere with hour overflow. This avoids - * messing with unknown time zones but requires your - * RTC not to be off by more than 15 minutes - */ - real_seconds = nowtime % 60; - real_minutes = nowtime / 60; - if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) - real_minutes += 30; /* correct for half hour time zone */ - real_minutes %= 60; - - /* unlock writes to the CCR */ - xicor_write(X1241REG_SR, X1241REG_SR_WEL); - xicor_write(X1241REG_SR, X1241REG_SR_WEL | X1241REG_SR_RWEL); - - if (abs(real_minutes - cmos_minutes) < 30) { - real_seconds = BIN2BCD(real_seconds); - real_minutes = BIN2BCD(real_minutes); - xicor_write(X1241REG_SC, real_seconds); - xicor_write(X1241REG_MN, real_minutes); - } else { - printk(KERN_WARNING - "set_rtc_mmss: can't update from %d to %d\n", - cmos_minutes, real_minutes); - retval = -1; - } - - xicor_write(X1241REG_SR, 0); - - printk("set_rtc_mmss: %02d:%02d\n", real_minutes, real_seconds); - - return retval; -} - -static unsigned long __init get_swarm_time(void) -{ - unsigned int year, mon, day, hour, min, sec, y2k; - - sec = xicor_read(X1241REG_SC); - min = xicor_read(X1241REG_MN); - hour = xicor_read(X1241REG_HR); - - if (hour & X1241REG_HR_MIL) { - hour &= 0x3f; - } else { - if (hour & 0x20) - hour = (hour & 0xf) + 0x12; - } - - sec = BCD2BIN(sec); - min = BCD2BIN(min); - hour = BCD2BIN(hour); - - day = xicor_read(X1241REG_DT); - mon = xicor_read(X1241REG_MO); - year = xicor_read(X1241REG_YR); - y2k = xicor_read(X1241REG_Y2K); - - day = BCD2BIN(day); - mon = BCD2BIN(mon); - year = BCD2BIN(year); - y2k = BCD2BIN(y2k); - - year += (y2k * 100); - - return mktime(year, mon, day, hour, min, sec); -} - -/* - * Bring up the timer at 100 Hz. - */ -void __init swarm_time_init(void) -{ - unsigned int flags; - int status; - - /* Set up the scd general purpose timer 0 to cpu 0 */ - sb1250_time_init(); - - /* Establish communication with the Xicor 1241 RTC */ - /* XXXKW how do I share the SMBus with the I2C subsystem? */ - - __raw_writeq(K_SMB_FREQ_400KHZ, SMB_CSR(R_SMB_FREQ)); - __raw_writeq(0, SMB_CSR(R_SMB_CONTROL)); - - if ((status = xicor_read(X1241REG_SR_RTCF)) < 0) { - printk("x1241: couldn't detect on SWARM SMBus 1\n"); - } else { - if (status & X1241REG_SR_RTCF) - printk("x1241: battery failed -- time is probably wrong\n"); - write_seqlock_irqsave(&xtime_lock, flags); - xtime.tv_sec = get_swarm_time(); - xtime.tv_nsec = 0; - write_sequnlock_irqrestore(&xtime_lock, flags); - } -}