From: Rex Zhu Date: Tue, 20 Oct 2015 10:06:23 +0000 (+0800) Subject: drm/amdgpu/powerplay: implement thermal control for tonga. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1e4854e96c35;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git drm/amdgpu/powerplay: implement thermal control for tonga. Implement thermal and fan control for tonga. Signed-off-by: Rex Zhu Reviewed-by: Jammy Zhou Reviewed-by: Alex Deucher --- diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile b/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile index 6f3881184a67..cea032c26582 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/Makefile @@ -6,7 +6,7 @@ HARDWARE_MGR = hwmgr.o processpptables.o functiontables.o \ hardwaremanager.o pp_acpi.o cz_hwmgr.o \ cz_clockpowergating.o \ tonga_processpptables.o ppatomctrl.o \ - tonga_hwmgr.o pppcielanes.o \ + tonga_hwmgr.o pppcielanes.o tonga_thermal.o\ fiji_powertune.o fiji_hwmgr.o tonga_clockpowergating.o AMD_PP_HWMGR = $(addprefix $(AMD_PP_PATH)/hwmgr/,$(HARDWARE_MGR)) diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c index 9a7de1fc17b2..088b5bf91251 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.c @@ -40,6 +40,7 @@ #include "smumgr.h" #include "tonga_smumgr.h" #include "tonga_clockpowergating.h" +#include "tonga_thermal.h" #include "smu/smu_7_1_2_d.h" #include "smu/smu_7_1_2_sh_mask.h" @@ -50,6 +51,9 @@ #include "bif/bif_5_0_d.h" #include "bif/bif_5_0_sh_mask.h" +#include "cgs_linux.h" +#include "eventmgr.h" + #define MC_CG_ARB_FREQ_F0 0x0a #define MC_CG_ARB_FREQ_F1 0x0b #define MC_CG_ARB_FREQ_F2 0x0c @@ -5721,6 +5725,22 @@ static int tonga_set_power_state_tasks(struct pp_hwmgr *hwmgr, const void *input return result; } +/** +* Set maximum target operating fan output PWM +* +* @param pHwMgr: the address of the powerplay hardware manager. +* @param usMaxFanPwm: max operating fan PWM in percents +* @return The response that came from the SMC. +*/ +static int tonga_set_max_fan_pwm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_pwm) +{ + hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanPWM = us_max_fan_pwm; + + if (phm_is_hw_access_blocked(hwmgr)) + return 0; + + return (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanPwmMax, us_max_fan_pwm) ? 0 : -EINVAL); +} int tonga_notify_smc_display_config_after_ps_adjustment(struct pp_hwmgr *hwmgr) { @@ -5799,6 +5819,122 @@ int tonga_display_configuration_changed_task(struct pp_hwmgr *hwmgr) return 0; } +/** +* Set maximum target operating fan output RPM +* +* @param pHwMgr: the address of the powerplay hardware manager. +* @param usMaxFanRpm: max operating fan RPM value. +* @return The response that came from the SMC. +*/ +static int tonga_set_max_fan_rpm_output(struct pp_hwmgr *hwmgr, uint16_t us_max_fan_pwm) +{ + hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanRPM = us_max_fan_pwm; + + if (phm_is_hw_access_blocked(hwmgr)) + return 0; + + return (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanRpmMax, us_max_fan_pwm) ? 0 : -EINVAL); +} + +uint32_t tonga_get_xclk(struct pp_hwmgr *hwmgr) +{ + uint32_t reference_clock; + uint32_t tc; + uint32_t divide; + + ATOM_FIRMWARE_INFO *fw_info; + uint16_t size; + uint8_t frev, crev; + int index = GetIndexIntoMasterTable(DATA, FirmwareInfo); + + tc = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_CLKPIN_CNTL_2, MUX_TCLK_TO_XCLK); + + if (tc) + return TCLK; + + fw_info = (ATOM_FIRMWARE_INFO *)cgs_atom_get_data_table(hwmgr->device, index, + &size, &frev, &crev); + + if (!fw_info) + return 0; + + reference_clock = le16_to_cpu(fw_info->usMinPixelClockPLL_Output); + + divide = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_CLKPIN_CNTL, XTALIN_DIVIDE); + + if (0 != divide) + return reference_clock / 4; + + return reference_clock; +} + +int tonga_dpm_set_interrupt_state(void *private_data, + unsigned src_id, unsigned type, + int enabled) +{ + uint32_t cg_thermal_int; + struct pp_hwmgr *hwmgr = ((struct pp_eventmgr *)private_data)->hwmgr; + + if (hwmgr == NULL) + return -EINVAL; + + switch (type) { + case AMD_THERMAL_IRQ_LOW_TO_HIGH: + if (enabled) { + cg_thermal_int = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT); + cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK; + cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int); + } else { + cg_thermal_int = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT); + cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTH_MASK_MASK; + cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int); + } + break; + + case AMD_THERMAL_IRQ_HIGH_TO_LOW: + if (enabled) { + cg_thermal_int = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT); + cg_thermal_int |= CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK; + cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int); + } else { + cg_thermal_int = cgs_read_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT); + cg_thermal_int &= ~CG_THERMAL_INT_CTRL__THERM_INTL_MASK_MASK; + cgs_write_ind_register(hwmgr->device, CGS_IND_REG__SMC, ixCG_THERMAL_INT, cg_thermal_int); + } + break; + default: + break; + } + return 0; +} + +int tonga_register_internal_thermal_interrupt(struct pp_hwmgr *hwmgr, + const void *thermal_interrupt_info) +{ + int result; + const struct pp_interrupt_registration_info *info = + (const struct pp_interrupt_registration_info *)thermal_interrupt_info; + + if (info == NULL) + return -EINVAL; + + result = cgs_add_irq_source(hwmgr->device, 230, AMD_THERMAL_IRQ_LAST, + tonga_dpm_set_interrupt_state, + info->call_back, info->context); + + if (result) + return -EINVAL; + + result = cgs_add_irq_source(hwmgr->device, 231, AMD_THERMAL_IRQ_LAST, + tonga_dpm_set_interrupt_state, + info->call_back, info->context); + + if (result) + return -EINVAL; + + return 0; +} + static const struct pp_hwmgr_func tonga_hwmgr_funcs = { .backend_init = &tonga_hwmgr_backend_init, .backend_fini = &tonga_hwmgr_backend_fini, @@ -5820,6 +5956,18 @@ static const struct pp_hwmgr_func tonga_hwmgr_funcs = { .disable_clock_power_gating = tonga_phm_disable_clock_power_gating, .notify_smc_display_config_after_ps_adjustment = tonga_notify_smc_display_config_after_ps_adjustment, .display_config_changed = tonga_display_configuration_changed_task, + .set_max_fan_pwm_output = tonga_set_max_fan_pwm_output, + .set_max_fan_rpm_output = tonga_set_max_fan_rpm_output, + .get_temperature = tonga_thermal_get_temperature, + .stop_thermal_controller = tonga_thermal_stop_thermal_controller, + .get_fan_speed_info = tonga_fan_ctrl_get_fan_speed_info, + .get_fan_speed_percent = tonga_fan_ctrl_get_fan_speed_percent, + .set_fan_speed_percent = tonga_fan_ctrl_set_fan_speed_percent, + .reset_fan_speed_to_default = tonga_fan_ctrl_reset_fan_speed_to_default, + .get_fan_speed_rpm = tonga_fan_ctrl_get_fan_speed_rpm, + .set_fan_speed_rpm = tonga_fan_ctrl_set_fan_speed_rpm, + .uninitialize_thermal_controller = tonga_thermal_ctrl_uninitialize_thermal_controller, + .register_internal_thermal_interrupt = tonga_register_internal_thermal_interrupt, }; int tonga_hwmgr_init(struct pp_hwmgr *hwmgr) @@ -5834,7 +5982,7 @@ int tonga_hwmgr_init(struct pp_hwmgr *hwmgr) hwmgr->backend = data; hwmgr->hwmgr_func = &tonga_hwmgr_funcs; hwmgr->pptable_func = &tonga_pptable_funcs; - + pp_tonga_thermal_initialize(hwmgr); return 0; } diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.h b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.h index d773d12258d2..44b985a92bb4 100644 --- a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.h +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_hwmgr.h @@ -426,6 +426,7 @@ int tonga_update_vce_dpm(struct pp_hwmgr *hwmgr, const void *input); int tonga_update_uvd_dpm(struct pp_hwmgr *hwmgr, bool bgate); int tonga_enable_disable_uvd_dpm(struct pp_hwmgr *hwmgr, bool enable); int tonga_enable_disable_vce_dpm(struct pp_hwmgr *hwmgr, bool enable); +uint32_t tonga_get_xclk(struct pp_hwmgr *hwmgr); #endif diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_thermal.c b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_thermal.c new file mode 100644 index 000000000000..a315507d9cd9 --- /dev/null +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_thermal.c @@ -0,0 +1,587 @@ +/* + * Copyright 2015 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#include "tonga_thermal.h" +#include "tonga_hwmgr.h" +#include "tonga_smumgr.h" +#include "tonga_ppsmc.h" +#include "smu/smu_7_1_2_d.h" +#include "smu/smu_7_1_2_sh_mask.h" + +/** +* Get Fan Speed Control Parameters. +* @param hwmgr the address of the powerplay hardware manager. +* @param pSpeed is the address of the structure where the result is to be placed. +* @exception Always succeeds except if we cannot zero out the output structure. +*/ +int tonga_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info) +{ + + if (hwmgr->thermal_controller.fanInfo.bNoFan) + return 0; + + fan_speed_info->supports_percent_read = true; + fan_speed_info->supports_percent_write = true; + fan_speed_info->min_percent = 0; + fan_speed_info->max_percent = 100; + + if (0 != hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) { + fan_speed_info->supports_rpm_read = true; + fan_speed_info->supports_rpm_write = true; + fan_speed_info->min_rpm = hwmgr->thermal_controller.fanInfo.ulMinRPM; + fan_speed_info->max_rpm = hwmgr->thermal_controller.fanInfo.ulMaxRPM; + } else { + fan_speed_info->min_rpm = 0; + fan_speed_info->max_rpm = 0; + } + + return 0; +} + +/** +* Get Fan Speed in percent. +* @param hwmgr the address of the powerplay hardware manager. +* @param pSpeed is the address of the structure where the result is to be placed. +* @exception Fails is the 100% setting appears to be 0. +*/ +int tonga_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed) +{ + uint32_t duty100; + uint32_t duty; + uint64_t tmp64; + + if (hwmgr->thermal_controller.fanInfo.bNoFan) + return 0; + + duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100); + duty = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_STATUS, FDO_PWM_DUTY); + + if (0 == duty100) + return -EINVAL; + + + tmp64 = (uint64_t)duty * 100; + do_div(tmp64, duty100); + *speed = (uint32_t)tmp64; + + if (*speed > 100) + *speed = 100; + + return 0; +} + +/** +* Get Fan Speed in RPM. +* @param hwmgr the address of the powerplay hardware manager. +* @param speed is the address of the structure where the result is to be placed. +* @exception Returns not supported if no fan is found or if pulses per revolution are not set +*/ +int tonga_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed) +{ + return 0; +} + +/** +* Set Fan Speed Control to static mode, so that the user can decide what speed to use. +* @param hwmgr the address of the powerplay hardware manager. +* mode the fan control mode, 0 default, 1 by percent, 5, by RPM +* @exception Should always succeed. +*/ +int tonga_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode) +{ + + if (hwmgr->fan_ctrl_is_in_default_mode) { + hwmgr->fan_ctrl_default_mode = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE); + hwmgr->tmin = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN); + hwmgr->fan_ctrl_is_in_default_mode = false; + } + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN, 0); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE, mode); + + return 0; +} + +/** +* Reset Fan Speed Control to default mode. +* @param hwmgr the address of the powerplay hardware manager. +* @exception Should always succeed. +*/ +int tonga_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr) +{ + if (hwmgr->fan_ctrl_is_in_default_mode) { + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, FDO_PWM_MODE, hwmgr->fan_ctrl_default_mode); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TMIN, hwmgr->tmin); + hwmgr->fan_ctrl_is_in_default_mode = true; + } + + return 0; +} + +int tonga_fan_ctrl_start_smc_fan_control(struct pp_hwmgr *hwmgr) +{ + int result; + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_ODFuzzyFanControlSupport)) { + cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_FUZZY); + result = (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl) == 0) ? 0 : -EINVAL; +/* + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_FanSpeedInTableIsRPM)) + hwmgr->set_max_fan_rpm_output(hwmgr, hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanRPM); + else + hwmgr->set_max_fan_pwm_output(hwmgr, hwmgr->thermal_controller.advanceFanControlParameters.usMaxFanPWM); +*/ + } else { + cgs_write_register(hwmgr->device, mmSMC_MSG_ARG_0, FAN_CONTROL_TABLE); + result = (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StartFanControl) == 0) ? 0 : -EINVAL; + } +/* TO DO FOR SOME DEVICE ID 0X692b, send this msg return invalid command. + if (result == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ucTargetTemperature != 0) + result = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanTemperatureTarget, \ + hwmgr->thermal_controller.advanceFanControlParameters.ucTargetTemperature) ? 0 : -EINVAL); +*/ + return result; +} + + +int tonga_fan_ctrl_stop_smc_fan_control(struct pp_hwmgr *hwmgr) +{ + return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_StopFanControl) == 0) ? 0 : -EINVAL; +} + +/** +* Set Fan Speed in percent. +* @param hwmgr the address of the powerplay hardware manager. +* @param speed is the percentage value (0% - 100%) to be set. +* @exception Fails is the 100% setting appears to be 0. +*/ +int tonga_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed) +{ + uint32_t duty100; + uint32_t duty; + uint64_t tmp64; + + if (hwmgr->thermal_controller.fanInfo.bNoFan) + return -EINVAL; + + if (speed > 100) + speed = 100; + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl)) + tonga_fan_ctrl_stop_smc_fan_control(hwmgr); + + duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100); + + if (0 == duty100) + return -EINVAL; + + tmp64 = (uint64_t)speed * 100; + do_div(tmp64, duty100); + duty = (uint32_t)tmp64; + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL0, FDO_STATIC_DUTY, duty); + + return tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC); +} + +/** +* Reset Fan Speed to default. +* @param hwmgr the address of the powerplay hardware manager. +* @exception Always succeeds. +*/ +int tonga_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr) +{ + int result; + + if (hwmgr->thermal_controller.fanInfo.bNoFan) + return 0; + + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl)) { + result = tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC); + if (0 == result) + result = tonga_fan_ctrl_start_smc_fan_control(hwmgr); + } else + result = tonga_fan_ctrl_set_default_mode(hwmgr); + + return result; +} + +/** +* Set Fan Speed in RPM. +* @param hwmgr the address of the powerplay hardware manager. +* @param speed is the percentage value (min - max) to be set. +* @exception Fails is the speed not lie between min and max. +*/ +int tonga_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed) +{ + return 0; +} + +/** +* Reads the remote temperature from the SIslands thermal controller. +* +* @param hwmgr The address of the hardware manager. +*/ +int tonga_thermal_get_temperature(struct pp_hwmgr *hwmgr) +{ + int temp; + + temp = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_MULT_THERMAL_STATUS, CTF_TEMP); + +/* Bit 9 means the reading is lower than the lowest usable value. */ + if (0 != (0x200 & temp)) + temp = TONGA_THERMAL_MAXIMUM_TEMP_READING; + else + temp = (temp & 0x1ff); + + temp = temp * PP_TEMPERATURE_UNITS_PER_CENTIGRADES; + + return temp; +} + +/** +* Set the requested temperature range for high and low alert signals +* +* @param hwmgr The address of the hardware manager. +* @param range Temperature range to be programmed for high and low alert signals +* @exception PP_Result_BadInput if the input data is not valid. +*/ +static int tonga_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, uint32_t low_temp, uint32_t high_temp) +{ + uint32_t low = TONGA_THERMAL_MINIMUM_ALERT_TEMP * PP_TEMPERATURE_UNITS_PER_CENTIGRADES; + uint32_t high = TONGA_THERMAL_MAXIMUM_ALERT_TEMP * PP_TEMPERATURE_UNITS_PER_CENTIGRADES; + + if (low < low_temp) + low = low_temp; + if (high > high_temp) + high = high_temp; + + if (low > high) + return -EINVAL; + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, DIG_THERM_INTH, (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, DIG_THERM_INTL, (low / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_CTRL, DIG_THERM_DPM, (high / PP_TEMPERATURE_UNITS_PER_CENTIGRADES)); + + return 0; +} + +/** +* Programs thermal controller one-time setting registers +* +* @param hwmgr The address of the hardware manager. +*/ +static int tonga_thermal_initialize(struct pp_hwmgr *hwmgr) +{ + if (0 != hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution) + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, + CG_TACH_CTRL, EDGE_PER_REV, + hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution - 1); + + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL2, TACH_PWM_RESP_RATE, 0x28); + + return 0; +} + +/** +* Enable thermal alerts on the RV770 thermal controller. +* +* @param hwmgr The address of the hardware manager. +*/ +static int tonga_thermal_enable_alert(struct pp_hwmgr *hwmgr) +{ + uint32_t alert; + + alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK); + alert &= ~(TONGA_THERMAL_HIGH_ALERT_MASK | TONGA_THERMAL_LOW_ALERT_MASK); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK, alert); + + /* send message to SMU to enable internal thermal interrupts */ + return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Enable) == 0) ? 0 : -1; +} + +/** +* Disable thermal alerts on the RV770 thermal controller. +* @param hwmgr The address of the hardware manager. +*/ +static int tonga_thermal_disable_alert(struct pp_hwmgr *hwmgr) +{ + uint32_t alert; + + alert = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK); + alert |= (TONGA_THERMAL_HIGH_ALERT_MASK | TONGA_THERMAL_LOW_ALERT_MASK); + PHM_WRITE_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_THERMAL_INT, THERM_INT_MASK, alert); + + /* send message to SMU to disable internal thermal interrupts */ + return (smum_send_msg_to_smc(hwmgr->smumgr, PPSMC_MSG_Thermal_Cntl_Disable) == 0) ? 0 : -1; +} + +/** +* Uninitialize the thermal controller. +* Currently just disables alerts. +* @param hwmgr The address of the hardware manager. +*/ +int tonga_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr) +{ + int result = tonga_thermal_disable_alert(hwmgr); + + if (hwmgr->thermal_controller.fanInfo.bNoFan) + tonga_fan_ctrl_set_default_mode(hwmgr); + + return result; +} + +/** +* Set up the fan table to control the fan using the SMC. +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from set temperature range routine +*/ +int tf_tonga_thermal_setup_fan_table(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result) +{ + struct tonga_hwmgr *data = (struct tonga_hwmgr *)(hwmgr->backend); + SMU72_Discrete_FanTable fan_table = { FDO_MODE_HARDWARE }; + uint32_t duty100; + uint32_t t_diff1, t_diff2, pwm_diff1, pwm_diff2; + uint16_t fdo_min, slope1, slope2; + uint32_t reference_clock; + int res; + uint64_t tmp64; + + if (0 == data->fan_table_start) { + phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl); + return 0; + } + + duty100 = PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_FDO_CTRL1, FMAX_DUTY100); + + if (0 == duty100) { + phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl); + return 0; + } + + tmp64 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin * duty100; + do_div(tmp64, 10000); + fdo_min = (uint16_t)tmp64; + + t_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usTMed - hwmgr->thermal_controller.advanceFanControlParameters.usTMin; + t_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usTHigh - hwmgr->thermal_controller.advanceFanControlParameters.usTMed; + + pwm_diff1 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed - hwmgr->thermal_controller.advanceFanControlParameters.usPWMMin; + pwm_diff2 = hwmgr->thermal_controller.advanceFanControlParameters.usPWMHigh - hwmgr->thermal_controller.advanceFanControlParameters.usPWMMed; + + slope1 = (uint16_t)((50 + ((16 * duty100 * pwm_diff1) / t_diff1)) / 100); + slope2 = (uint16_t)((50 + ((16 * duty100 * pwm_diff2) / t_diff2)) / 100); + + fan_table.TempMin = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMin) / 100); + fan_table.TempMed = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMed) / 100); + fan_table.TempMax = cpu_to_be16((50 + hwmgr->thermal_controller.advanceFanControlParameters.usTMax) / 100); + + fan_table.Slope1 = cpu_to_be16(slope1); + fan_table.Slope2 = cpu_to_be16(slope2); + + fan_table.FdoMin = cpu_to_be16(fdo_min); + + fan_table.HystDown = cpu_to_be16(hwmgr->thermal_controller.advanceFanControlParameters.ucTHyst); + + fan_table.HystUp = cpu_to_be16(1); + + fan_table.HystSlope = cpu_to_be16(1); + + fan_table.TempRespLim = cpu_to_be16(5); + + reference_clock = tonga_get_xclk(hwmgr); + + fan_table.RefreshPeriod = cpu_to_be32((hwmgr->thermal_controller.advanceFanControlParameters.ulCycleDelay * reference_clock) / 1600); + + fan_table.FdoMax = cpu_to_be16((uint16_t)duty100); + + fan_table.TempSrc = (uint8_t)PHM_READ_VFPF_INDIRECT_FIELD(hwmgr->device, CGS_IND_REG__SMC, CG_MULT_THERMAL_CTRL, TEMP_SEL); + + fan_table.FanControl_GL_Flag = 1; + + res = tonga_copy_bytes_to_smc(hwmgr->smumgr, data->fan_table_start, (uint8_t *)&fan_table, (uint32_t)sizeof(fan_table), data->sram_end); +/* TO DO FOR SOME DEVICE ID 0X692b, send this msg return invalid command. + if (res == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ucMinimumPWMLimit != 0) + res = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanMinPwm, \ + hwmgr->thermal_controller.advanceFanControlParameters.ucMinimumPWMLimit) ? 0 : -1); + + if (res == 0 && hwmgr->thermal_controller.advanceFanControlParameters.ulMinFanSCLKAcousticLimit != 0) + res = (0 == smum_send_msg_to_smc_with_parameter(hwmgr->smumgr, PPSMC_MSG_SetFanSclkTarget, \ + hwmgr->thermal_controller.advanceFanControlParameters.ulMinFanSCLKAcousticLimit) ? 0 : -1); + + if (0 != res) + phm_cap_unset(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl); +*/ + return 0; +} + +/** +* Start the fan control on the SMC. +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from set temperature range routine +*/ +int tf_tonga_thermal_start_smc_fan_control(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result) +{ +/* If the fantable setup has failed we could have disabled PHM_PlatformCaps_MicrocodeFanControl even after this function was included in the table. + * Make sure that we still think controlling the fan is OK. +*/ + if (phm_cap_enabled(hwmgr->platform_descriptor.platformCaps, PHM_PlatformCaps_MicrocodeFanControl)) { + tonga_fan_ctrl_start_smc_fan_control(hwmgr); + tonga_fan_ctrl_set_static_mode(hwmgr, FDO_PWM_MODE_STATIC); + } + + return 0; +} + +/** +* Set temperature range for high and low alerts +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from set temperature range routine +*/ +int tf_tonga_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result) +{ + struct PP_TemperatureRange *range = (struct PP_TemperatureRange *)input; + + if (range == NULL) + return -EINVAL; + + return tonga_thermal_set_temperature_range(hwmgr, range->min, range->max); +} + +/** +* Programs one-time setting registers +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from initialize thermal controller routine +*/ +int tf_tonga_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result) +{ + return tonga_thermal_initialize(hwmgr); +} + +/** +* Enable high and low alerts +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from enable alert routine +*/ +int tf_tonga_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result) +{ + return tonga_thermal_enable_alert(hwmgr); +} + +/** +* Disable high and low alerts +* @param hwmgr the address of the powerplay hardware manager. +* @param pInput the pointer to input data +* @param pOutput the pointer to output data +* @param pStorage the pointer to temporary storage +* @param Result the last failure code +* @return result from disable alert routine +*/ +static int tf_tonga_thermal_disable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result) +{ + return tonga_thermal_disable_alert(hwmgr); +} + +static struct phm_master_table_item tonga_thermal_start_thermal_controller_master_list[] = { + { NULL, tf_tonga_thermal_initialize }, + { NULL, tf_tonga_thermal_set_temperature_range }, + { NULL, tf_tonga_thermal_enable_alert }, +/* We should restrict performance levels to low before we halt the SMC. + * On the other hand we are still in boot state when we do this so it would be pointless. + * If this assumption changes we have to revisit this table. + */ + { NULL, tf_tonga_thermal_setup_fan_table}, + { NULL, tf_tonga_thermal_start_smc_fan_control}, + { NULL, NULL } +}; + +static struct phm_master_table_header tonga_thermal_start_thermal_controller_master = { + 0, + PHM_MasterTableFlag_None, + tonga_thermal_start_thermal_controller_master_list +}; + +static struct phm_master_table_item tonga_thermal_set_temperature_range_master_list[] = { + { NULL, tf_tonga_thermal_disable_alert}, + { NULL, tf_tonga_thermal_set_temperature_range}, + { NULL, tf_tonga_thermal_enable_alert}, + { NULL, NULL } +}; + +struct phm_master_table_header tonga_thermal_set_temperature_range_master = { + 0, + PHM_MasterTableFlag_None, + tonga_thermal_set_temperature_range_master_list +}; + +int tonga_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr) +{ + if (!hwmgr->thermal_controller.fanInfo.bNoFan) + tonga_fan_ctrl_set_default_mode(hwmgr); + return 0; +} + +/** +* Initializes the thermal controller related functions in the Hardware Manager structure. +* @param hwmgr The address of the hardware manager. +* @exception Any error code from the low-level communication. +*/ +int pp_tonga_thermal_initialize(struct pp_hwmgr *hwmgr) +{ + int result; + + result = phm_construct_table(hwmgr, &tonga_thermal_set_temperature_range_master, &(hwmgr->set_temperature_range)); + + if (0 == result) { + result = phm_construct_table(hwmgr, + &tonga_thermal_start_thermal_controller_master, + &(hwmgr->start_thermal_controller)); + if (0 != result) + phm_destroy_table(hwmgr, &(hwmgr->set_temperature_range)); + } + + if (0 == result) + hwmgr->fan_ctrl_is_in_default_mode = true; + return result; +} + diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_thermal.h b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_thermal.h new file mode 100644 index 000000000000..07680a75b43a --- /dev/null +++ b/drivers/gpu/drm/amd/powerplay/hwmgr/tonga_thermal.h @@ -0,0 +1,60 @@ +/* + * Copyright 2015 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ + +#ifndef TONGA_THERMAL_H +#define TONGA_THERMAL_H + +#include "hwmgr.h" + +#define TONGA_THERMAL_HIGH_ALERT_MASK 0x1 +#define TONGA_THERMAL_LOW_ALERT_MASK 0x2 + +#define TONGA_THERMAL_MINIMUM_TEMP_READING -256 +#define TONGA_THERMAL_MAXIMUM_TEMP_READING 255 + +#define TONGA_THERMAL_MINIMUM_ALERT_TEMP 0 +#define TONGA_THERMAL_MAXIMUM_ALERT_TEMP 255 + +#define FDO_PWM_MODE_STATIC 1 +#define FDO_PWM_MODE_STATIC_RPM 5 + + +extern int tf_tonga_thermal_initialize(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result); +extern int tf_tonga_thermal_set_temperature_range(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result); +extern int tf_tonga_thermal_enable_alert(struct pp_hwmgr *hwmgr, void *input, void *output, void *storage, int result); + +extern int tonga_thermal_get_temperature(struct pp_hwmgr *hwmgr); +extern int tonga_thermal_stop_thermal_controller(struct pp_hwmgr *hwmgr); +extern int tonga_fan_ctrl_get_fan_speed_info(struct pp_hwmgr *hwmgr, struct phm_fan_speed_info *fan_speed_info); +extern int tonga_fan_ctrl_get_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t *speed); +extern int tonga_fan_ctrl_set_default_mode(struct pp_hwmgr *hwmgr); +extern int tonga_fan_ctrl_set_static_mode(struct pp_hwmgr *hwmgr, uint32_t mode); +extern int tonga_fan_ctrl_set_fan_speed_percent(struct pp_hwmgr *hwmgr, uint32_t speed); +extern int tonga_fan_ctrl_reset_fan_speed_to_default(struct pp_hwmgr *hwmgr); +extern int pp_tonga_thermal_initialize(struct pp_hwmgr *hwmgr); +extern int tonga_thermal_ctrl_uninitialize_thermal_controller(struct pp_hwmgr *hwmgr); +extern int tonga_fan_ctrl_set_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t speed); +extern int tonga_fan_ctrl_get_fan_speed_rpm(struct pp_hwmgr *hwmgr, uint32_t *speed); + +#endif +