From: Nicolas Dufresne Date: Mon, 15 Dec 2014 21:10:57 +0000 (-0300) Subject: [media] s5p-mfc-v6+: Use display_delay_enable CID X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1b880ef62cc43d049bd92a31a0612caacb5f30b2;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git [media] s5p-mfc-v6+: Use display_delay_enable CID The MFC driver has two controls, DISPLAY_DELAY and DISPLAY_DELAY_ENABLE that allow forcing the decoder to return a decoded frame sooner regardless of the order. The added support for firmware version 6 and higher was not taking into account the DISPLAY_DELAY_ENABLE boolean. Instead it had a comment stating that DISPLAY_DELAY should be set to a negative value to disable it. This is not possible since the control range is from 0 to 65535. This feature was also supposed to be disabled by default in order to produce frames in display order. Signed-off-by: Nicolas Dufresne Acked-by: Kamil Debski Signed-off-by: Kamil Debski Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c index 9aea179943ce..d826c58b5d53 100644 --- a/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c +++ b/drivers/media/platform/s5p-mfc/s5p_mfc_opr_v6.c @@ -1340,11 +1340,7 @@ static int s5p_mfc_init_decode_v6(struct s5p_mfc_ctx *ctx) /* FMO_ASO_CTRL - 0: Enable, 1: Disable */ reg |= (fmo_aso_ctrl << S5P_FIMV_D_OPT_FMO_ASO_CTRL_MASK_V6); - /* When user sets desplay_delay to 0, - * It works as "display_delay enable" and delay set to 0. - * If user wants display_delay disable, It should be - * set to negative value. */ - if (ctx->display_delay >= 0) { + if (ctx->display_delay_enable) { reg |= (0x1 << S5P_FIMV_D_OPT_DDELAY_EN_SHIFT_V6); writel(ctx->display_delay, mfc_regs->d_display_delay); }