From: Tim Harvey Date: Mon, 10 Apr 2017 20:58:10 +0000 (-0700) Subject: ARM: dts: imx: ventana: fix DTC warnings X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1b1ec50366a87ed84ac07db9a09c56ac7cafb367;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ARM: dts: imx: ventana: fix DTC warnings Remove the sky2 ethernet device node from the pcie controller which was invalid to begin with. The original intent was to allow the bootloader to populate the MAC via dt but this requires the PCI bus topology to be complete in dt as well and as these boards have an expansion connector that topology is dynamic and can't be represented here. Signed-off-by: Tim Harvey Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts index 8e84713f42c0..687ab911c13f 100644 --- a/arch/arm/boot/dts/imx6q-gw5400-a.dts +++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts @@ -19,7 +19,6 @@ /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; i2c0 = &i2c1; i2c1 = &i2c2; i2c2 = &i2c3; @@ -347,10 +346,6 @@ &pcie { reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &ssi1 { diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi index a208e7e0dc6e..5bc6ed1a5b35 100644 --- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -342,10 +341,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm2 { diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi index 968fda94d14b..66fcf838e964 100644 --- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi @@ -14,7 +14,6 @@ / { /* these are used by bootloader for disabling nodes */ aliases { - ethernet1 = ð1; led0 = &led0; led1 = &led1; led2 = &led2; @@ -379,10 +378,6 @@ pinctrl-0 = <&pinctrl_pcie>; reset-gpio = <&gpio1 29 GPIO_ACTIVE_LOW>; status = "okay"; - - eth1: sky2@8 { /* MAC/PHY on bus 8 */ - compatible = "marvell,sky2"; - }; }; &pwm1 {