From: Florian Vaussard Date: Fri, 7 Mar 2014 19:22:19 +0000 (+0100) Subject: ARM: dts: overo: Push uart3 pinmux down to expansion board X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1afb89746ca0e5b5d24dcb119c084516a0a4fd36;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ARM: dts: overo: Push uart3 pinmux down to expansion board UART3 is used by expansion boards to get a tty console. Thus, the pinmux should be defined by expansion boards, instead of being imposed by the processor board. Signed-off-by: Florian Vaussard Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 13d1ad215494..d36bf0250a05 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -96,13 +96,6 @@ >; }; - uart3_pins: pinmux_uart3_pins { - pinctrl-single,pins = < - OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ - >; - }; - i2c1_pins: pinmux_i2c1_pins { pinctrl-single,pins = < OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */ @@ -226,7 +219,3 @@ pinctrl-0 = <&uart2_pins>; }; -&uart3 { - pinctrl-names = "default"; - pinctrl-0 = <&uart3_pins>; -}; diff --git a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi index 0312d2240db3..384e87d7f3bb 100644 --- a/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi +++ b/arch/arm/boot/dts/omap3-overo-tobi-common.dtsi @@ -28,6 +28,13 @@ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT | MUX_MODE0) /* i2c3_sda.i2c3_sda */ >; }; + + uart3_pins: pinmux_uart3_pins { + pinctrl-single,pins = < + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx */ + >; + }; }; #include "omap-gpmc-smsc9221.dtsi" @@ -58,3 +65,9 @@ &mmc3 { status = "disabled"; }; + +&uart3 { + pinctrl-names = "default"; + pinctrl-0 = <&uart3_pins>; +}; +