From: Felix Fietkau Date: Mon, 13 Dec 2010 07:40:53 +0000 (+0100) Subject: ath9k_hw: fix the PA predistortion rate mask X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1782352d4908c79d195b43e0c1b6b109e0d93d05;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git ath9k_hw: fix the PA predistortion rate mask The EEPROM PAPRD rate mask fields only contain mask values for actual rates in the low 25 bits. The upper bits are reserved for tx power scale values. Add the proper mask definitions and use them before writing the values to the register. Signed-off-by: Felix Fietkau Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h index 620821ea692..efb6a02be37 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h +++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h @@ -31,6 +31,12 @@ #define AR9300_ANT_16S 25 #define AR9300_FUTURE_MODAL_SZ 6 +#define AR9300_PAPRD_RATE_MASK 0x01ffffff +#define AR9300_PAPRD_SCALE_1 0x0e000000 +#define AR9300_PAPRD_SCALE_1_S 25 +#define AR9300_PAPRD_SCALE_2 0x70000000 +#define AR9300_PAPRD_SCALE_2_S 28 + /* Delta from which to start power to pdadc table */ /* This offset is used in both open loop and closed loop power control * schemes. In open loop power control, it is not really needed, but for diff --git a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c index 74cff4365c4..cdca4c3265b 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_paprd.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_paprd.c @@ -52,8 +52,8 @@ static void ar9003_paprd_setup_single_table(struct ath_hw *ah) else hdr = &eep->modalHeader2G; - am_mask = le32_to_cpu(hdr->papdRateMaskHt20); - ht40_mask = le32_to_cpu(hdr->papdRateMaskHt40); + am_mask = le32_to_cpu(hdr->papdRateMaskHt20) & AR9300_PAPRD_RATE_MASK; + ht40_mask = le32_to_cpu(hdr->papdRateMaskHt40) & AR9300_PAPRD_RATE_MASK; REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2AM, AR_PHY_PAPRD_AM2AM_MASK, am_mask); REG_RMW_FIELD(ah, AR_PHY_PAPRD_AM2PM, AR_PHY_PAPRD_AM2PM_MASK, am_mask);