From: Mitko Haralanov Date: Wed, 19 Oct 2011 22:46:47 +0000 (-0400) Subject: IB/qib: Fix issue with link states and QSFP cables X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=16d99812d58b8af2df29cd337a74cd965b53da04;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git IB/qib: Fix issue with link states and QSFP cables Fix an issue where the link would come up after replugging a cable even if it has been DISABLED manually. Signed-off-by: Mitko Haralanov Signed-off-by: Mike Marciniszyn Signed-off-by: Roland Dreier --- diff --git a/drivers/infiniband/hw/qib/qib_iba7322.c b/drivers/infiniband/hw/qib/qib_iba7322.c index 86575fbcaef7..efd0a110091f 100644 --- a/drivers/infiniband/hw/qib/qib_iba7322.c +++ b/drivers/infiniband/hw/qib/qib_iba7322.c @@ -2310,12 +2310,15 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) val = ppd->cpspec->ibcctrl_a | (QLOGIC_IB_IBCC_LINKINITCMD_DISABLE << QLOGIC_IB_IBCC_LINKINITCMD_SHIFT); + ppd->cpspec->ibcctrl_a = val; /* * Reset the PCS interface to the serdes (and also ibc, which is still * in reset from above). Writes new value of ibcctrl_a as last step. */ qib_7322_mini_pcs_reset(ppd); qib_write_kreg(dd, kr_scratch, 0ULL); + /* clear the linkinit cmds */ + ppd->cpspec->ibcctrl_a &= ~SYM_MASK(IBCCtrlA_0, LinkInitCmd); if (!ppd->cpspec->ibcctrl_b) { unsigned lse = ppd->link_speed_enabled; @@ -2381,11 +2384,6 @@ static int qib_7322_bringup_serdes(struct qib_pportdata *ppd) ppd->cpspec->ibcctrl_a |= SYM_MASK(IBCCtrlA_0, IBLinkEn); set_vls(ppd); - /* Hold the link state machine for mezz boards */ - qib_set_ib_7322_lstate(ppd, 0, - QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); - - /* be paranoid against later code motion, etc. */ spin_lock_irqsave(&dd->cspec->rcvmod_lock, flags); ppd->p_rcvctrl |= SYM_MASK(RcvCtrl_0, RcvIBPortEnable); @@ -5594,6 +5592,7 @@ static void qsfp_7322_event(struct work_struct *work) struct qib_qsfp_data *qd; struct qib_pportdata *ppd; u64 pwrup; + unsigned long flags; int ret; u32 le2; @@ -5605,11 +5604,15 @@ static void qsfp_7322_event(struct work_struct *work) /* Delay for 20 msecs to allow ModPrs resistor to setup */ mdelay(QSFP_MODPRS_LAG_MSEC); - if (!qib_qsfp_mod_present(ppd)) + if (!qib_qsfp_mod_present(ppd)) { + ppd->cpspec->qsfp_data.modpresent = 0; /* Set the physical link to disabled */ qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_DISABLE); - else { + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags &= ~QIBL_LINKV; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } else { /* * Some QSFP's not only do not respond until the full power-up * time, but may behave badly if we try. So hold off responding @@ -5649,11 +5652,18 @@ static void qsfp_7322_event(struct work_struct *work) */ init_txdds_table(ppd, 0); /* The physical link is being re-enabled only when the - previous state was DISABLED. This should only happen when - the cable has been physically pulled. */ - if (ppd->lflags & QIBL_IB_LINK_DISABLED) + * previous state was DISABLED and the VALID bit is not + * set. This should only happen when the cable has been + * physically pulled. */ + if (!ppd->cpspec->qsfp_data.modpresent && + (ppd->lflags & (QIBL_LINKV | QIBL_IB_LINK_DISABLED))) { + ppd->cpspec->qsfp_data.modpresent = 1; qib_set_ib_7322_lstate(ppd, 0, QLOGIC_IB_IBCC_LINKINITCMD_SLEEP); + spin_lock_irqsave(&ppd->lflags_lock, flags); + ppd->lflags |= QIBL_LINKV; + spin_unlock_irqrestore(&ppd->lflags_lock, flags); + } } } diff --git a/drivers/infiniband/hw/qib/qib_qsfp.h b/drivers/infiniband/hw/qib/qib_qsfp.h index 786a92a25c25..46002a9417c0 100644 --- a/drivers/infiniband/hw/qib/qib_qsfp.h +++ b/drivers/infiniband/hw/qib/qib_qsfp.h @@ -178,6 +178,7 @@ struct qib_qsfp_data { struct work_struct work; struct qib_qsfp_cache cache; u64 t_insert; + u8 modpresent; }; extern int qib_refresh_qsfp_cache(struct qib_pportdata *ppd,