From: Atsushi Nemoto Date: Mon, 23 Oct 2006 15:21:27 +0000 (+0900) Subject: [MIPS] Fixup migration to GENERIC_TIME X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=16b7b2ac0148e839da86af8747b6fa4aad43a9b7;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git [MIPS] Fixup migration to GENERIC_TIME Since we already moved to GENERIC_TIME, we should implement alternatives of old do_gettimeoffset routines to get sub-jiffies resolution from gettimeofday(). This patch includes: * MIPS clocksource support (based on works by Manish Lachwani). * remove unused gettimeoffset routines and related codes. * remove unised 64bit do_div64_32(). * simplify mips_hpt_init. (no argument needed, __init tag) * simplify c0_hpt_timer_init. (no need to write to c0_count) * remove some hpt_init routines. * mips_hpt_mask variable to specify bitmask of hpt value. * convert jmr3927_do_gettimeoffset to jmr3927_hpt_read. * convert ip27_do_gettimeoffset to ip27_hpt_read. * convert bcm1480_do_gettimeoffset to bcm1480_hpt_read. * simplify sb1250 hpt functions. (no need to subtract and shift) Signed-off-by: Atsushi Nemoto Signed-off-by: Ralf Baechle --- diff --git a/Documentation/mips/time.README b/Documentation/mips/time.README index e1304b6bc483..a4ce603ed3b3 100644 --- a/Documentation/mips/time.README +++ b/Documentation/mips/time.README @@ -38,19 +38,14 @@ The new time code provide the following services: a) Implements functions required by Linux common code: time_init - do_gettimeofday - do_settimeofday b) provides an abstraction of RTC and null RTC implementation as default. extern unsigned long (*rtc_get_time)(void); extern int (*rtc_set_time)(unsigned long); - c) a set of gettimeoffset functions for different CPUs and different - needs. - - d) high-level and low-level timer interrupt routines where the timer - interrupt source may or may not be the CPU timer. The high-level - routine is dispatched through do_IRQ() while the low-level is + c) high-level and low-level timer interrupt routines where the timer + interrupt source may or may not be the CPU timer. The high-level + routine is dispatched through do_IRQ() while the low-level is dispatched in assemably code (usually int-handler.S) @@ -73,8 +68,7 @@ the following functions or values: c) (optional) board-specific RTC routines. d) (optional) mips_hpt_frequency - It must be definied if the board - is using CPU counter for timer interrupt or it is using fixed rate - gettimeoffset(). + is using CPU counter for timer interrupt. PORTING GUIDE @@ -89,16 +83,6 @@ Step 1: decide how you like to implement the time services. If the answer is no, you need a timer to provide the timer interrupt at 100 HZ speed. - You cannot use the fast gettimeoffset functions, i.e., - - unsigned long fixed_rate_gettimeoffset(void); - unsigned long calibrate_div32_gettimeoffset(void); - unsigned long calibrate_div64_gettimeoffset(void); - - You can use null_gettimeoffset() will gives the same time resolution as - jiffy. Or you can implement your own gettimeoffset (probably based on - some ad hoc hardware on your machine.) - c) The following sub steps assume your CPU has counter register. Do you plan to use the CPU counter register as the timer interrupt or use an exnternal timer? @@ -123,8 +107,8 @@ Step 3: implement rtc routines, board_time_init() and plat_timer_setup() board_time_init() - a) (optional) set up RTC routines, b) (optional) calibrate and set the mips_hpt_frequency - (only needed if you intended to use fixed_rate_gettimeoffset - or use cpu counter as timer interrupt source) + (only needed if you intended to use cpu counter as timer interrupt + source) plat_timer_setup() - a) (optional) over-write any choices made above by time_init(). @@ -154,8 +138,8 @@ for some of the functions in time.c. For example, you may define your own timer interrupt routine, which does some of its own processing and then calls timer_interrupt(). -You can also over-ride any of the built-in functions (gettimeoffset, -RTC routines and/or timer interrupt routine). +You can also over-ride any of the built-in functions (RTC routines +and/or timer interrupt routine). PORTING NOTES FOR SMP @@ -187,10 +171,3 @@ You need to decide on your timer interrupt sources. You can also do the low-level version of those interrupt routines, following similar dispatching routes described above. - -Note about do_gettimeoffset(): - - It is very likely the CPU counter registers are not sync'ed up in a SMP box. - Therefore you cannot really use the many of the existing routines that - are based on CPU counter. You should wirte your own gettimeoffset rouinte - if you want intra-jiffy resolution. diff --git a/arch/mips/au1000/common/time.c b/arch/mips/au1000/common/time.c index 6768638883ea..fa1c62f05515 100644 --- a/arch/mips/au1000/common/time.c +++ b/arch/mips/au1000/common/time.c @@ -53,9 +53,6 @@ static unsigned long r4k_cur; /* What counter should be at next timer irq */ int no_au1xxx_32khz; extern int allow_au1k_wait; /* default off for CP0 Counter */ -/* Cycle counter value at the previous timer interrupt.. */ -static unsigned int timerhi = 0, timerlo = 0; - #ifdef CONFIG_PM #if HZ < 100 || HZ > 1000 #error "unsupported HZ value! Must be in [100,1000]" @@ -90,10 +87,6 @@ void mips_timer_interrupt(void) goto null; do { - count = read_c0_count(); - timerhi += (count < timerlo); /* Wrap around */ - timerlo = count; - kstat_this_cpu.irqs[irq]++; do_timer(1); #ifndef CONFIG_SMP @@ -297,88 +290,6 @@ unsigned long cal_r4koff(void) return (cpu_speed / HZ); } -/* This is for machines which generate the exact clock. */ -#define USECS_PER_JIFFY (1000000/HZ) -#define USECS_PER_JIFFY_FRAC (0x100000000LL*1000000/HZ&0xffffffff) - -static unsigned long -div64_32(unsigned long v1, unsigned long v2, unsigned long v3) -{ - unsigned long r0; - do_div64_32(r0, v1, v2, v3); - return r0; -} - -static unsigned long do_fast_cp0_gettimeoffset(void) -{ - u32 count; - unsigned long res, tmp; - unsigned long r0; - - /* Last jiffy when do_fast_gettimeoffset() was called. */ - static unsigned long last_jiffies=0; - unsigned long quotient; - - /* - * Cached "1/(clocks per usec)*2^32" value. - * It has to be recalculated once each jiffy. - */ - static unsigned long cached_quotient=0; - - tmp = jiffies; - - quotient = cached_quotient; - - if (tmp && last_jiffies != tmp) { - last_jiffies = tmp; - if (last_jiffies != 0) { - r0 = div64_32(timerhi, timerlo, tmp); - quotient = div64_32(USECS_PER_JIFFY, USECS_PER_JIFFY_FRAC, r0); - cached_quotient = quotient; - } - } - - /* Get last timer tick in absolute kernel time */ - count = read_c0_count(); - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; - - __asm__("multu\t%1,%2\n\t" - "mfhi\t%0" - : "=r" (res) - : "r" (count), "r" (quotient) - : "hi", "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY-1; - - return res; -} - -#ifdef CONFIG_PM -static unsigned long do_fast_pm_gettimeoffset(void) -{ - unsigned long pc0; - unsigned long offset; - - pc0 = au_readl(SYS_TOYREAD); - au_sync(); - offset = pc0 - last_pc0; - if (offset > 2*MATCH20_INC) { - printk("huge offset %x, last_pc0 %x last_match20 %x pc0 %x\n", - (unsigned)offset, (unsigned)last_pc0, - (unsigned)last_match20, (unsigned)pc0); - } - offset = (unsigned long)((offset * 305) / 10); - return offset; -} -#endif - void __init plat_timer_setup(struct irqaction *irq) { unsigned int est_freq; @@ -416,7 +327,6 @@ void __init plat_timer_setup(struct irqaction *irq) unsigned int c0_status; printk("WARNING: no 32KHz clock found.\n"); - do_gettimeoffset = do_fast_cp0_gettimeoffset; /* Ensure we get CPO_COUNTER interrupts. */ @@ -441,19 +351,11 @@ void __init plat_timer_setup(struct irqaction *irq) while (au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_M20); startup_match20_interrupt(counter0_irq); - do_gettimeoffset = do_fast_pm_gettimeoffset; - /* We can use the real 'wait' instruction. */ allow_au1k_wait = 1; } -#else - /* We have to do this here instead of in timer_init because - * the generic code in arch/mips/kernel/time.c will write - * over our function pointer. - */ - do_gettimeoffset = do_fast_cp0_gettimeoffset; #endif } diff --git a/arch/mips/dec/time.c b/arch/mips/dec/time.c index 4cf0c06e2414..69e424e9ab6f 100644 --- a/arch/mips/dec/time.c +++ b/arch/mips/dec/time.c @@ -160,11 +160,6 @@ static unsigned int dec_ioasic_hpt_read(void) return ioasic_read(IO_REG_FCTR); } -static void dec_ioasic_hpt_init(unsigned int count) -{ - ioasic_write(IO_REG_FCTR, ioasic_read(IO_REG_FCTR) - count); -} - void __init dec_time_init(void) { @@ -174,11 +169,9 @@ void __init dec_time_init(void) mips_timer_state = dec_timer_state; mips_timer_ack = dec_timer_ack; - if (!cpu_has_counter && IOASIC) { + if (!cpu_has_counter && IOASIC) /* For pre-R4k systems we use the I/O ASIC's counter. */ mips_hpt_read = dec_ioasic_hpt_read; - mips_hpt_init = dec_ioasic_hpt_init; - } /* Set up the rate of periodic DS1287 interrupts. */ CMOS_WRITE(RTC_REF_CLCK_32KHZ | (16 - __ffs(HZ)), RTC_REG_A); diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index 025434054ed0..16e5dfe7aa8a 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -170,12 +170,20 @@ static void jmr3927_machine_power_off(void) while (1); } +static unsigned int jmr3927_hpt_read(void) +{ + /* We assume this function is called xtime_lock held. */ + return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr; +} + #define USE_RTC_DS1742 #ifdef USE_RTC_DS1742 extern void rtc_ds1742_init(unsigned long base); #endif static void __init jmr3927_time_init(void) { + mips_hpt_read = jmr3927_hpt_read; + mips_hpt_frequency = JMR3927_TIMER_CLK; #ifdef USE_RTC_DS1742 if (jmr3927_have_nvram()) { rtc_ds1742_init(JMR3927_IOC_NVRAMB_ADDR); @@ -183,12 +191,8 @@ static void __init jmr3927_time_init(void) #endif } -unsigned long jmr3927_do_gettimeoffset(void); - void __init plat_timer_setup(struct irqaction *irq) { - do_gettimeoffset = jmr3927_do_gettimeoffset; - jmr3927_tmrptr->cpra = JMR3927_TIMER_CLK / HZ; jmr3927_tmrptr->itmr = TXx927_TMTITMR_TIIE | TXx927_TMTITMR_TZCE; jmr3927_tmrptr->ccdr = JMR3927_TIMER_CCD; @@ -200,34 +204,6 @@ void __init plat_timer_setup(struct irqaction *irq) #define USECS_PER_JIFFY (1000000/HZ) -unsigned long jmr3927_do_gettimeoffset(void) -{ - unsigned long count; - unsigned long res = 0; - - /* MUST read TRR before TISR. */ - count = jmr3927_tmrptr->trr; - - if (jmr3927_tmrptr->tisr & TXx927_TMTISR_TIIS) { - /* timer interrupt is pending. use Max value. */ - res = USECS_PER_JIFFY - 1; - } else { - /* convert to usec */ - /* res = count / (JMR3927_TIMER_CLK / 1000000); */ - res = (count << 7) / ((JMR3927_TIMER_CLK << 7) / 1000000); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY-1; - } - - return res; -} - - //#undef DO_WRITE_THROUGH #define DO_WRITE_THROUGH #define DO_ENABLE_CACHE diff --git a/arch/mips/kernel/time.c b/arch/mips/kernel/time.c index debe86c2f691..e535f86efa2f 100644 --- a/arch/mips/kernel/time.c +++ b/arch/mips/kernel/time.c @@ -11,6 +11,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. */ +#include #include #include #include @@ -67,15 +68,9 @@ int (*rtc_mips_set_time)(unsigned long) = null_rtc_set_time; int (*rtc_mips_set_mmss)(unsigned long); -/* usecs per counter cycle, shifted to left by 32 bits */ -static unsigned int sll32_usecs_per_cycle; - /* how many counter cycles in a jiffy */ static unsigned long cycles_per_jiffy __read_mostly; -/* Cycle counter value at the previous timer interrupt.. */ -static unsigned int timerhi, timerlo; - /* expirelo is the count value for next CPU timer interrupt */ static unsigned int expirelo; @@ -93,7 +88,7 @@ static unsigned int null_hpt_read(void) return 0; } -static void null_hpt_init(unsigned int count) +static void __init null_hpt_init(void) { /* nothing */ } @@ -128,186 +123,18 @@ static unsigned int c0_hpt_read(void) return read_c0_count(); } -/* For use solely as a high precision timer. */ -static void c0_hpt_init(unsigned int count) -{ - write_c0_count(read_c0_count() - count); -} - /* For use both as a high precision timer and an interrupt source. */ -static void c0_hpt_timer_init(unsigned int count) +static void __init c0_hpt_timer_init(void) { - count = read_c0_count() - count; - expirelo = (count / cycles_per_jiffy + 1) * cycles_per_jiffy; - write_c0_count(expirelo - cycles_per_jiffy); + expirelo = read_c0_count() + cycles_per_jiffy; write_c0_compare(expirelo); - write_c0_count(count); } int (*mips_timer_state)(void); void (*mips_timer_ack)(void); unsigned int (*mips_hpt_read)(void); -void (*mips_hpt_init)(unsigned int); - -/* - * Gettimeoffset routines. These routines returns the time duration - * since last timer interrupt in usecs. - * - * If the exact CPU counter frequency is known, use fixed_rate_gettimeoffset. - * Otherwise use calibrate_gettimeoffset() - * - * If the CPU does not have the counter register, you can either supply - * your own gettimeoffset() routine, or use null_gettimeoffset(), which - * gives the same resolution as HZ. - */ - -static unsigned long null_gettimeoffset(void) -{ - return 0; -} - - -/* The function pointer to one of the gettimeoffset funcs. */ -unsigned long (*do_gettimeoffset)(void) = null_gettimeoffset; - - -static unsigned long fixed_rate_gettimeoffset(void) -{ - u32 count; - unsigned long res; - - /* Get last timer tick in absolute kernel time */ - count = mips_hpt_read(); - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; - - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (sll32_usecs_per_cycle) - : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY - 1; - - return res; -} - - -/* - * Cached "1/(clocks per usec) * 2^32" value. - * It has to be recalculated once each jiffy. - */ -static unsigned long cached_quotient; - -/* Last jiffy when calibrate_divXX_gettimeoffset() was called. */ -static unsigned long last_jiffies; - -/* - * This is moved from dec/time.c:do_ioasic_gettimeoffset() by Maciej. - */ -static unsigned long calibrate_div32_gettimeoffset(void) -{ - u32 count; - unsigned long res, tmp; - unsigned long quotient; - - tmp = jiffies; - - quotient = cached_quotient; - - if (last_jiffies != tmp) { - last_jiffies = tmp; - if (last_jiffies != 0) { - unsigned long r0; - do_div64_32(r0, timerhi, timerlo, tmp); - do_div64_32(quotient, USECS_PER_JIFFY, - USECS_PER_JIFFY_FRAC, r0); - cached_quotient = quotient; - } - } - - /* Get last timer tick in absolute kernel time */ - count = mips_hpt_read(); - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; - - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) - : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY - 1; - - return res; -} - -static unsigned long calibrate_div64_gettimeoffset(void) -{ - u32 count; - unsigned long res, tmp; - unsigned long quotient; - - tmp = jiffies; - - quotient = cached_quotient; - - if (last_jiffies != tmp) { - last_jiffies = tmp; - if (last_jiffies) { - unsigned long r0; - __asm__(".set push\n\t" - ".set mips3\n\t" - "lwu %0,%3\n\t" - "dsll32 %1,%2,0\n\t" - "or %1,%1,%0\n\t" - "ddivu $0,%1,%4\n\t" - "mflo %1\n\t" - "dsll32 %0,%5,0\n\t" - "or %0,%0,%6\n\t" - "ddivu $0,%0,%1\n\t" - "mflo %0\n\t" - ".set pop" - : "=&r" (quotient), "=&r" (r0) - : "r" (timerhi), "m" (timerlo), - "r" (tmp), "r" (USECS_PER_JIFFY), - "r" (USECS_PER_JIFFY_FRAC) - : "hi", "lo", GCC_REG_ACCUM); - cached_quotient = quotient; - } - } - - /* Get last timer tick in absolute kernel time */ - count = mips_hpt_read(); - - /* .. relative to previous jiffy (32 bits is enough) */ - count -= timerlo; - - __asm__("multu %1,%2" - : "=h" (res) - : "r" (count), "r" (quotient) - : "lo", GCC_REG_ACCUM); - - /* - * Due to possible jiffies inconsistencies, we need to check - * the result so that we'll get a timer that is monotonic. - */ - if (res >= USECS_PER_JIFFY) - res = USECS_PER_JIFFY - 1; - - return res; -} - +void (*mips_hpt_init)(void) __initdata = null_hpt_init; +unsigned int mips_hpt_mask = 0xffffffff; /* last time when xtime and rtc are sync'ed up */ static long last_rtc_update; @@ -334,18 +161,10 @@ void local_timer_interrupt(int irq, void *dev_id) */ irqreturn_t timer_interrupt(int irq, void *dev_id) { - unsigned long j; - unsigned int count; - write_seqlock(&xtime_lock); - count = mips_hpt_read(); mips_timer_ack(); - /* Update timerhi/timerlo for intra-jiffy calibration. */ - timerhi += count < timerlo; /* Wrap around */ - timerlo = count; - /* * call the generic timer interrupt handling */ @@ -368,47 +187,6 @@ irqreturn_t timer_interrupt(int irq, void *dev_id) } } - /* - * If jiffies has overflown in this timer_interrupt, we must - * update the timer[hi]/[lo] to make fast gettimeoffset funcs - * quotient calc still valid. -arca - * - * The first timer interrupt comes late as interrupts are - * enabled long after timers are initialized. Therefore the - * high precision timer is fast, leading to wrong gettimeoffset() - * calculations. We deal with it by setting it based on the - * number of its ticks between the second and the third interrupt. - * That is still somewhat imprecise, but it's a good estimate. - * --macro - */ - j = jiffies; - if (j < 4) { - static unsigned int prev_count; - static int hpt_initialized; - - switch (j) { - case 0: - timerhi = timerlo = 0; - mips_hpt_init(count); - break; - case 2: - prev_count = count; - break; - case 3: - if (!hpt_initialized) { - unsigned int c3 = 3 * (count - prev_count); - - timerhi = 0; - timerlo = c3; - mips_hpt_init(count - c3); - hpt_initialized = 1; - } - break; - default: - break; - } - } - write_sequnlock(&xtime_lock); /* @@ -476,12 +254,11 @@ asmlinkage void ll_local_timer_interrupt(int irq) * 1) board_time_init() - * a) (optional) set up RTC routines, * b) (optional) calibrate and set the mips_hpt_frequency - * (only needed if you intended to use fixed_rate_gettimeoffset - * or use cpu counter as timer interrupt source) + * (only needed if you intended to use cpu counter as timer interrupt + * source) * 2) setup xtime based on rtc_mips_get_time(). - * 3) choose a appropriate gettimeoffset routine. - * 4) calculate a couple of cached variables for later usage - * 5) plat_timer_setup() - + * 3) calculate a couple of cached variables for later usage + * 4) plat_timer_setup() - * a) (optional) over-write any choices made above by time_init(). * b) machine specific code should setup the timer irqaction. * c) enable the timer interrupt @@ -533,13 +310,48 @@ static unsigned int __init calibrate_hpt(void) } while (--i); hpt_end = mips_hpt_read(); - hpt_count = hpt_end - hpt_start; + hpt_count = (hpt_end - hpt_start) & mips_hpt_mask; hz = HZ; frequency = (u64)hpt_count * (u64)hz; return frequency >> log_2_loops; } +static cycle_t read_mips_hpt(void) +{ + return (cycle_t)mips_hpt_read(); +} + +static struct clocksource clocksource_mips = { + .name = "MIPS", + .read = read_mips_hpt, + .is_continuous = 1, +}; + +static void __init init_mips_clocksource(void) +{ + u64 temp; + u32 shift; + + if (!mips_hpt_frequency || mips_hpt_read == null_hpt_read) + return; + + /* Calclate a somewhat reasonable rating value */ + clocksource_mips.rating = 200 + mips_hpt_frequency / 10000000; + /* Find a shift value */ + for (shift = 32; shift > 0; shift--) { + temp = (u64) NSEC_PER_SEC << shift; + do_div(temp, mips_hpt_frequency); + if ((temp >> 32) == 0) + break; + } + clocksource_mips.shift = shift; + clocksource_mips.mult = (u32)temp; + clocksource_mips.mask = mips_hpt_mask; + + clocksource_register(&clocksource_mips); +} + void __init time_init(void) { if (board_time_init) @@ -555,41 +367,21 @@ void __init time_init(void) -xtime.tv_sec, -xtime.tv_nsec); /* Choose appropriate high precision timer routines. */ - if (!cpu_has_counter && !mips_hpt_read) { + if (!cpu_has_counter && !mips_hpt_read) /* No high precision timer -- sorry. */ mips_hpt_read = null_hpt_read; - mips_hpt_init = null_hpt_init; - } else if (!mips_hpt_frequency && !mips_timer_state) { + else if (!mips_hpt_frequency && !mips_timer_state) { /* A high precision timer of unknown frequency. */ - if (!mips_hpt_read) { + if (!mips_hpt_read) /* No external high precision timer -- use R4k. */ mips_hpt_read = c0_hpt_read; - mips_hpt_init = c0_hpt_init; - } - - if (cpu_has_mips32r1 || cpu_has_mips32r2 || - (current_cpu_data.isa_level == MIPS_CPU_ISA_I) || - (current_cpu_data.isa_level == MIPS_CPU_ISA_II)) - /* - * We need to calibrate the counter but we don't have - * 64-bit division. - */ - do_gettimeoffset = calibrate_div32_gettimeoffset; - else - /* - * We need to calibrate the counter but we *do* have - * 64-bit division. - */ - do_gettimeoffset = calibrate_div64_gettimeoffset; } else { /* We know counter frequency. Or we can get it. */ if (!mips_hpt_read) { /* No external high precision timer -- use R4k. */ mips_hpt_read = c0_hpt_read; - if (mips_timer_state) - mips_hpt_init = c0_hpt_init; - else { + if (!mips_timer_state) { /* No external timer interrupt -- use R4k. */ mips_hpt_init = c0_hpt_timer_init; mips_timer_ack = c0_timer_ack; @@ -598,16 +390,9 @@ void __init time_init(void) if (!mips_hpt_frequency) mips_hpt_frequency = calibrate_hpt(); - do_gettimeoffset = fixed_rate_gettimeoffset; - /* Calculate cache parameters. */ cycles_per_jiffy = (mips_hpt_frequency + HZ / 2) / HZ; - /* sll32_usecs_per_cycle = 10^6 * 2^32 / mips_counter_freq */ - do_div64_32(sll32_usecs_per_cycle, - 1000000, mips_hpt_frequency / 2, - mips_hpt_frequency); - /* Report the high precision timer rate for a reference. */ printk("Using %u.%03u MHz high precision timer.\n", ((mips_hpt_frequency + 500) / 1000) / 1000, @@ -619,7 +404,7 @@ void __init time_init(void) mips_timer_ack = null_timer_ack; /* This sets up the high precision timer for the first interrupt. */ - mips_hpt_init(mips_hpt_read()); + mips_hpt_init(); /* * Call board specific timer interrupt setup. @@ -633,6 +418,8 @@ void __init time_init(void) * is not invoked accidentally. */ plat_timer_setup(&timer_irqaction); + + init_mips_clocksource(); } #define FEBRUARY 2 diff --git a/arch/mips/philips/pnx8550/common/time.c b/arch/mips/philips/pnx8550/common/time.c index 0af655b1f330..65c440e8480b 100644 --- a/arch/mips/philips/pnx8550/common/time.c +++ b/arch/mips/philips/pnx8550/common/time.c @@ -41,8 +41,8 @@ extern unsigned int mips_hpt_frequency; * 1) board_time_init() - * a) (optional) set up RTC routines, * b) (optional) calibrate and set the mips_hpt_frequency - * (only needed if you intended to use fixed_rate_gettimeoffset - * or use cpu counter as timer interrupt source) + * (only needed if you intended to use cpu counter as timer interrupt + * source) */ void pnx8550_time_init(void) diff --git a/arch/mips/pmc-sierra/yosemite/smp.c b/arch/mips/pmc-sierra/yosemite/smp.c index 65fa3a23ea5e..3cc0436db6cf 100644 --- a/arch/mips/pmc-sierra/yosemite/smp.c +++ b/arch/mips/pmc-sierra/yosemite/smp.c @@ -3,9 +3,7 @@ #include #include - -extern unsigned int (*mips_hpt_read)(void); -extern void (*mips_hpt_init)(unsigned int); +#include #define LAUNCHSTACK_SIZE 256 @@ -101,7 +99,7 @@ void prom_cpus_done(void) */ void prom_init_secondary(void) { - mips_hpt_init(mips_hpt_read()); + mips_hpt_init(); set_c0_status(ST0_CO | ST0_IE | ST0_IM); } diff --git a/arch/mips/sgi-ip27/ip27-timer.c b/arch/mips/sgi-ip27/ip27-timer.c index 4e870fc4469b..c965705f3427 100644 --- a/arch/mips/sgi-ip27/ip27-timer.c +++ b/arch/mips/sgi-ip27/ip27-timer.c @@ -134,13 +134,6 @@ again: irq_exit(); } -unsigned long ip27_do_gettimeoffset(void) -{ - unsigned long ct_cur1; - ct_cur1 = REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT) + CYCLES_PER_JIFFY; - return (ct_cur1 - ct_cur[0]) * NSEC_PER_CYCLE / 1000; -} - /* Includes for ioc3_init(). */ #include #include @@ -248,12 +241,17 @@ void __init plat_timer_setup(struct irqaction *irq) setup_irq(irqno, &rt_irqaction); } +static unsigned int ip27_hpt_read(void) +{ + return REMOTE_HUB_L(cputonasid(0), PI_RT_COUNT); +} + void __init ip27_time_init(void) { + mips_hpt_read = ip27_hpt_read; + mips_hpt_frequency = CYCLES_PER_SEC; xtime.tv_sec = get_m48t35_time(); xtime.tv_nsec = 0; - - do_gettimeoffset = ip27_do_gettimeoffset; } void __init cpu_time_init(void) diff --git a/arch/mips/sibyte/bcm1480/time.c b/arch/mips/sibyte/bcm1480/time.c index bf12af46132e..e136bde5248e 100644 --- a/arch/mips/sibyte/bcm1480/time.c +++ b/arch/mips/sibyte/bcm1480/time.c @@ -47,6 +47,12 @@ #define IMR_IP3_VAL K_BCM1480_INT_MAP_I1 #define IMR_IP4_VAL K_BCM1480_INT_MAP_I2 +#ifdef CONFIG_SIMULATION +#define BCM1480_HPT_VALUE 50000 +#else +#define BCM1480_HPT_VALUE 1000000 +#endif + extern int bcm1480_steal_irq(int irq); void bcm1480_time_init(void) @@ -59,11 +65,6 @@ void bcm1480_time_init(void) BUG(); } - if (!cpu) { - /* Use our own gettimeoffset() routine */ - do_gettimeoffset = bcm1480_gettimeoffset; - } - bcm1480_mask_irq(cpu, irq); /* Map the timer interrupt to ip[4] of this cpu */ @@ -74,11 +75,7 @@ void bcm1480_time_init(void) /* Disable the timer and set up the count */ __raw_writeq(0, IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG))); __raw_writeq( -#ifndef CONFIG_SIMULATION - 1000000/HZ -#else - 50000/HZ -#endif + BCM1480_HPT_VALUE/HZ , IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT))); /* Set the timer running */ @@ -122,16 +119,16 @@ void bcm1480_timer_interrupt(void) } } -/* - * We use our own do_gettimeoffset() instead of the generic one, - * because the generic one does not work for SMP case. - * In addition, since we use general timer 0 for system time, - * we can get accurate intra-jiffy offset without calibration. - */ -unsigned long bcm1480_gettimeoffset(void) +static unsigned int bcm1480_hpt_read(void) { + /* We assume this function is called xtime_lock held. */ unsigned long count = __raw_readq(IOADDR(A_SCD_TIMER_REGISTER(0, R_SCD_TIMER_CNT))); + return (jiffies + 1) * (BCM1480_HPT_VALUE / HZ) - count; +} - return 1000000/HZ - count; +void __init bcm1480_hpt_setup(void) +{ + mips_hpt_read = bcm1480_hpt_read; + mips_hpt_frequency = BCM1480_HPT_VALUE; } diff --git a/arch/mips/sibyte/sb1250/time.c b/arch/mips/sibyte/sb1250/time.c index 0ccf1796dd78..bcb74f2c1948 100644 --- a/arch/mips/sibyte/sb1250/time.c +++ b/arch/mips/sibyte/sb1250/time.c @@ -47,15 +47,11 @@ #define SB1250_HPT_NUM 3 #define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */ -#define SB1250_HPT_SHIFT ((sizeof(unsigned int)*8)-V_SCD_TIMER_WIDTH) extern int sb1250_steal_irq(int irq); static unsigned int sb1250_hpt_read(void); -static void sb1250_hpt_init(unsigned int); - -static unsigned int hpt_offset; void __init sb1250_hpt_setup(void) { @@ -69,13 +65,9 @@ void __init sb1250_hpt_setup(void) __raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS, IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CFG))); - /* - * we need to fill 32 bits, so just use the upper 23 bits and pretend - * the timer is going 512Mhz instead of 1Mhz - */ - mips_hpt_frequency = V_SCD_TIMER_FREQ << SB1250_HPT_SHIFT; - mips_hpt_init = sb1250_hpt_init; + mips_hpt_frequency = V_SCD_TIMER_FREQ; mips_hpt_read = sb1250_hpt_read; + mips_hpt_mask = M_SCD_TIMER_INIT; } } @@ -149,11 +141,7 @@ void sb1250_timer_interrupt(void) /* * The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over - * again. There's no easy way to set to a specific value so store init value - * in hpt_offset and subtract each time. - * - * Note: Timer isn't full 32bits so shift it into the upper part making - * it appear to run at a higher frequency. + * again. */ static unsigned int sb1250_hpt_read(void) { @@ -161,13 +149,5 @@ static unsigned int sb1250_hpt_read(void) count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT)))); - count = (SB1250_HPT_VALUE - count) << SB1250_HPT_SHIFT; - - return count - hpt_offset; -} - -static void sb1250_hpt_init(unsigned int count) -{ - hpt_offset = count; - return; + return SB1250_HPT_VALUE - count; } diff --git a/include/asm-mips/div64.h b/include/asm-mips/div64.h index 5f7dcf5452e7..d107832de1b6 100644 --- a/include/asm-mips/div64.h +++ b/include/asm-mips/div64.h @@ -82,27 +82,6 @@ #if (_MIPS_SZLONG == 64) -/* - * Don't use this one in new code - */ -#define do_div64_32(res, high, low, base) ({ \ - unsigned int __quot, __mod; \ - unsigned long __div; \ - unsigned int __low, __high, __base; \ - \ - __high = (high); \ - __low = (low); \ - __div = __high; \ - __div = __div << 32 | __low; \ - __base = (base); \ - \ - __mod = __div % __base; \ - __div = __div / __base; \ - \ - __quot = __div; \ - (res) = __quot; \ - __mod; }) - /* * Hey, we're already 64-bit, no * need to play games.. diff --git a/include/asm-mips/sibyte/sb1250.h b/include/asm-mips/sibyte/sb1250.h index b09e16c93ca0..2ba6988ddc8e 100644 --- a/include/asm-mips/sibyte/sb1250.h +++ b/include/asm-mips/sibyte/sb1250.h @@ -51,8 +51,8 @@ extern void sb1250_mask_irq(int cpu, int irq); extern void sb1250_unmask_irq(int cpu, int irq); extern void sb1250_smp_finish(void); +extern void bcm1480_hpt_setup(void); extern void bcm1480_time_init(void); -extern unsigned long bcm1480_gettimeoffset(void); extern void bcm1480_mask_irq(int cpu, int irq); extern void bcm1480_unmask_irq(int cpu, int irq); extern void bcm1480_smp_finish(void); diff --git a/include/asm-mips/time.h b/include/asm-mips/time.h index 28512ba2266e..625acd337bc3 100644 --- a/include/asm-mips/time.h +++ b/include/asm-mips/time.h @@ -48,7 +48,8 @@ extern void (*mips_timer_ack)(void); * If mips_hpt_read is NULL, an R4k-compatible timer setup is attempted. */ extern unsigned int (*mips_hpt_read)(void); -extern void (*mips_hpt_init)(unsigned int); +extern void (*mips_hpt_init)(void); +extern unsigned int mips_hpt_mask; /* * to_tm() converts system time back to (year, mon, day, hour, min, sec). @@ -57,13 +58,6 @@ extern void (*mips_hpt_init)(unsigned int); */ extern void to_tm(unsigned long tim, struct rtc_time *tm); -/* - * do_gettimeoffset(). By default, this func pointer points to - * do_null_gettimeoffset(), which leads to the same resolution as HZ. - * Higher resolution versions are available, which give ~1us resolution. - */ -extern unsigned long (*do_gettimeoffset)(void); - /* * high-level timer interrupt routines. */