From: Vipin Mehta Date: Fri, 18 Feb 2011 21:13:07 +0000 (-0800) Subject: staging: ath6kl: Consolidating hardware configuration X-Git-Tag: MMI-PSA29.97-13-9~20521^2~489 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=15eccc06e107f7d28e3e9985dc529a5dbbc4df63;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git staging: ath6kl: Consolidating hardware configuration Move all the wmi configuration commands done after wmi_ready to a single function. Signed-off-by: Vipin Mehta Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/ath6kl/os/linux/ar6000_drv.c b/drivers/staging/ath6kl/os/linux/ar6000_drv.c index d907e93f9457..b69280da1130 100644 --- a/drivers/staging/ath6kl/os/linux/ar6000_drv.c +++ b/drivers/staging/ath6kl/os/linux/ar6000_drv.c @@ -2417,6 +2417,120 @@ u8 ar6000_endpoint_id2_ac(void * devt, HTC_ENDPOINT_ID ep ) return(arEndpoint2Ac(ar, ep )); } +/* + * This function applies WLAN specific configuration defined in wlan_config.h + */ +int ar6000_target_config_wlan_params(AR_SOFTC_T *ar) +{ + int status = 0; +#if defined(INIT_MODE_DRV_ENABLED) && defined(ENABLE_COEXISTENCE) + WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD sbcb_cmd; + WMI_SET_BTCOEX_FE_ANT_CMD sbfa_cmd; +#endif /* INIT_MODE_DRV_ENABLED && ENABLE_COEXISTENCE */ + +#ifdef CONFIG_HOST_TCMD_SUPPORT + if (ar->arTargetMode != AR6000_WLAN_MODE) { + return 0; + } +#endif /* CONFIG_HOST_TCMD_SUPPORT */ + + /* + * configure the device for rx dot11 header rules 0,0 are the default values + * therefore this command can be skipped if the inputs are 0,FALSE,FALSE.Required + * if checksum offload is needed. Set RxMetaVersion to 2 + */ + if ((wmi_set_rx_frame_format_cmd(ar->arWmi,ar->rxMetaVersion, processDot11Hdr, processDot11Hdr)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the rx frame format.\n")); + status = A_ERROR; + } + +#if defined(INIT_MODE_DRV_ENABLED) && defined(ENABLE_COEXISTENCE) + /* Configure the type of BT collocated with WLAN */ + memset(&sbcb_cmd, 0, sizeof(WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD)); +#ifdef CONFIG_AR600x_BT_QCOM + sbcb_cmd.btcoexCoLocatedBTdev = 1; +#elif defined(CONFIG_AR600x_BT_CSR) + sbcb_cmd.btcoexCoLocatedBTdev = 2; +#elif defined(CONFIG_AR600x_BT_AR3001) + sbcb_cmd.btcoexCoLocatedBTdev = 3; +#else +#error Unsupported Bluetooth Type +#endif /* Collocated Bluetooth Type */ + + if ((wmi_set_btcoex_colocated_bt_dev_cmd(ar->arWmi, &sbcb_cmd)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set collocated BT type\n")); + status = A_ERROR; + } + + /* Configure the type of BT collocated with WLAN */ + memset(&sbfa_cmd, 0, sizeof(WMI_SET_BTCOEX_FE_ANT_CMD)); +#ifdef CONFIG_AR600x_DUAL_ANTENNA + sbfa_cmd.btcoexFeAntType = 2; +#elif defined(CONFIG_AR600x_SINGLE_ANTENNA) + sbfa_cmd.btcoexFeAntType = 1; +#else +#error Unsupported Front-End Antenna Configuration +#endif /* AR600x Front-End Antenna Configuration */ + + if ((wmi_set_btcoex_fe_ant_cmd(ar->arWmi, &sbfa_cmd)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set fornt end antenna configuration\n")); + status = A_ERROR; + } +#endif /* INIT_MODE_DRV_ENABLED && ENABLE_COEXISTENCE */ + +#if WLAN_CONFIG_IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN + if ((wmi_pmparams_cmd(ar->arWmi, 0, 1, 0, 0, 1, IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set power save fail event policy\n")); + status = A_ERROR; + } +#endif + +#if WLAN_CONFIG_DONOT_IGNORE_BARKER_IN_ERP + if ((wmi_set_lpreamble_cmd(ar->arWmi, 0, WMI_DONOT_IGNORE_BARKER_IN_ERP)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set barker preamble policy\n")); + status = A_ERROR; + } +#endif + + if ((wmi_set_keepalive_cmd(ar->arWmi, WLAN_CONFIG_KEEP_ALIVE_INTERVAL)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set keep alive interval\n")); + status = A_ERROR; + } + +#if WLAN_CONFIG_DISABLE_11N + { + WMI_SET_HT_CAP_CMD htCap; + + memset(&htCap, 0, sizeof(WMI_SET_HT_CAP_CMD)); + htCap.band = 0; + if ((wmi_set_ht_cap_cmd(ar->arWmi, &htCap)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set ht capabilities \n")); + status = A_ERROR; + } + + htCap.band = 1; + if ((wmi_set_ht_cap_cmd(ar->arWmi, &htCap)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set ht capabilities \n")); + status = A_ERROR; + } + } +#endif /* WLAN_CONFIG_DISABLE_11N */ + +#ifdef ATH6K_CONFIG_OTA_MODE + if ((wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set power mode \n")); + status = A_ERROR; + } +#endif + + if ((wmi_disctimeout_cmd(ar->arWmi, WLAN_CONFIG_DISCONNECT_TIMEOUT)) != 0) { + AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set disconnect timeout \n")); + status = A_ERROR; + } + + return status; +} + /* This function does one time initialization for the lifetime of the device */ int ar6000_init(struct net_device *dev) { @@ -2425,10 +2539,6 @@ int ar6000_init(struct net_device *dev) s32 timeleft; s16 i; int ret = 0; -#if defined(INIT_MODE_DRV_ENABLED) && defined(ENABLE_COEXISTENCE) - WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD sbcb_cmd; - WMI_SET_BTCOEX_FE_ANT_CMD sbfa_cmd; -#endif /* INIT_MODE_DRV_ENABLED && ENABLE_COEXISTENCE */ if((ar = ar6k_priv(dev)) == NULL) { @@ -2696,46 +2806,7 @@ int ar6000_init(struct net_device *dev) if ((ar6000_set_host_app_area(ar)) != 0) { AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the host app area\n")); } - - /* configure the device for rx dot11 header rules 0,0 are the default values - * therefore this command can be skipped if the inputs are 0,false,false.Required - if checksum offload is needed. Set RxMetaVersion to 2*/ - if ((wmi_set_rx_frame_format_cmd(ar->arWmi,ar->rxMetaVersion, processDot11Hdr, processDot11Hdr)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set the rx frame format.\n")); - } - -#if defined(INIT_MODE_DRV_ENABLED) && defined(ENABLE_COEXISTENCE) - /* Configure the type of BT collocated with WLAN */ - A_MEMZERO(&sbcb_cmd, sizeof(WMI_SET_BTCOEX_COLOCATED_BT_DEV_CMD)); -#ifdef CONFIG_AR600x_BT_QCOM - sbcb_cmd.btcoexCoLocatedBTdev = 1; -#elif defined(CONFIG_AR600x_BT_CSR) - sbcb_cmd.btcoexCoLocatedBTdev = 2; -#elif defined(CONFIG_AR600x_BT_AR3001) - sbcb_cmd.btcoexCoLocatedBTdev = 3; -#else -#error Unsupported Bluetooth Type -#endif /* Collocated Bluetooth Type */ - - if ((wmi_set_btcoex_colocated_bt_dev_cmd(ar->arWmi, &sbcb_cmd)) != 0) - { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set collocated BT type\n")); - } - - /* Configure the type of BT collocated with WLAN */ - A_MEMZERO(&sbfa_cmd, sizeof(WMI_SET_BTCOEX_FE_ANT_CMD)); -#ifdef CONFIG_AR600x_DUAL_ANTENNA - sbfa_cmd.btcoexFeAntType = 2; -#elif defined(CONFIG_AR600x_SINGLE_ANTENNA) - sbfa_cmd.btcoexFeAntType = 1; -#else -#error Unsupported Front-End Antenna Configuration -#endif /* AR600x Front-End Antenna Configuration */ - - if ((wmi_set_btcoex_fe_ant_cmd(ar->arWmi, &sbfa_cmd)) != 0) { - AR_DEBUG_PRINTF(ATH_DEBUG_ERR,("Unable to set fornt end antenna configuration\n")); - } -#endif /* INIT_MODE_DRV_ENABLED && ENABLE_COEXISTENCE */ + ar6000_target_config_wlan_params(ar); } ar->arNumDataEndPts = 1; @@ -4169,31 +4240,6 @@ ar6000_ready_event(void *devt, u8 *datap, u8 phyCap, u32 sw_ver, u32 abi_ver) /* Indicate to the waiting thread that the ready event was received */ ar->arWmiReady = true; wake_up(&arEvent); - -#if WLAN_CONFIG_IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN - wmi_pmparams_cmd(ar->arWmi, 0, 1, 0, 0, 1, IGNORE_POWER_SAVE_FAIL_EVENT_DURING_SCAN); -#endif -#if WLAN_CONFIG_DONOT_IGNORE_BARKER_IN_ERP - wmi_set_lpreamble_cmd(ar->arWmi, 0, WMI_DONOT_IGNORE_BARKER_IN_ERP); -#endif - wmi_set_keepalive_cmd(ar->arWmi, WLAN_CONFIG_KEEP_ALIVE_INTERVAL); -#if WLAN_CONFIG_DISABLE_11N - { - WMI_SET_HT_CAP_CMD htCap; - - A_MEMZERO(&htCap, sizeof(WMI_SET_HT_CAP_CMD)); - htCap.band = 0; - wmi_set_ht_cap_cmd(ar->arWmi, &htCap); - - htCap.band = 1; - wmi_set_ht_cap_cmd(ar->arWmi, &htCap); - } -#endif /* WLAN_CONFIG_DISABLE_11N */ - -#ifdef ATH6K_CONFIG_OTA_MODE - wmi_powermode_cmd(ar->arWmi, MAX_PERF_POWER); -#endif - wmi_disctimeout_cmd(ar->arWmi, WLAN_CONFIG_DISCONNECT_TIMEOUT); } void