From: Philip Rakity Date: Fri, 19 Nov 2010 21:48:39 +0000 (-0500) Subject: mmc: sdhci: 8-bit bus width changes X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=15ec44611904be0dcc97b84c29fbf964e5e2b36f;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git mmc: sdhci: 8-bit bus width changes We now: * check for a v3 controller before setting 8-bit bus width * offer a callback for platform code to switch to 8-bit mode, which allows non-v3 controllers to support it * rely on mmc->caps |= MMC_CAP_8_BIT_DATA; in platform code to specify that the board designers have indeed brought out all the pins for 8-bit to the slot. We were previously relying only on whether the *controller* supported 8-bit, which doesn't tell us anything about the pin configuration in the board design. This fixes the MMC card regression reported by Maxim Levitsky here: http://thread.gmane.org/gmane.linux.kernel.mmc/4336 by no longer assuming that 8-bit works by default. Signed-off-by: Philip Rakity Tested-by: Giuseppe Cavallaro Signed-off-by: Chris Ball --- diff --git a/arch/arm/plat-pxa/include/plat/sdhci.h b/arch/arm/plat-pxa/include/plat/sdhci.h index e49c5b6fc4e..1ab332e37d7 100644 --- a/arch/arm/plat-pxa/include/plat/sdhci.h +++ b/arch/arm/plat-pxa/include/plat/sdhci.h @@ -17,6 +17,9 @@ /* Require clock free running */ #define PXA_FLAG_DISABLE_CLOCK_GATING (1<<0) +/* Board design supports 8-bit data on SD/SDIO BUS */ +#define PXA_FLAG_SD_8_BIT_CAPABLE_SLOT (1<<2) + /* * struct pxa_sdhci_platdata() - Platform device data for PXA SDHCI * @max_speed: the maximum speed supported diff --git a/drivers/mmc/host/sdhci-pxa.c b/drivers/mmc/host/sdhci-pxa.c index fc406ac5d19..5a61208cbc6 100644 --- a/drivers/mmc/host/sdhci-pxa.c +++ b/drivers/mmc/host/sdhci-pxa.c @@ -141,6 +141,10 @@ static int __devinit sdhci_pxa_probe(struct platform_device *pdev) if (pdata->quirks) host->quirks |= pdata->quirks; + /* If slot design supports 8 bit data, indicate this to MMC. */ + if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) + host->mmc->caps |= MMC_CAP_8_BIT_DATA; + ret = sdhci_add_host(host); if (ret) { dev_err(&pdev->dev, "failed to add host\n"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 154cbf83c1a..a25db426c91 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1185,17 +1185,31 @@ static void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (host->ops->platform_send_init_74_clocks) host->ops->platform_send_init_74_clocks(host, ios->power_mode); - ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); - - if (ios->bus_width == MMC_BUS_WIDTH_8) - ctrl |= SDHCI_CTRL_8BITBUS; - else - ctrl &= ~SDHCI_CTRL_8BITBUS; + /* + * If your platform has 8-bit width support but is not a v3 controller, + * or if it requires special setup code, you should implement that in + * platform_8bit_width(). + */ + if (host->ops->platform_8bit_width) + host->ops->platform_8bit_width(host, ios->bus_width); + else { + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); + if (ios->bus_width == MMC_BUS_WIDTH_8) { + ctrl &= ~SDHCI_CTRL_4BITBUS; + if (host->version >= SDHCI_SPEC_300) + ctrl |= SDHCI_CTRL_8BITBUS; + } else { + if (host->version >= SDHCI_SPEC_300) + ctrl &= ~SDHCI_CTRL_8BITBUS; + if (ios->bus_width == MMC_BUS_WIDTH_4) + ctrl |= SDHCI_CTRL_4BITBUS; + else + ctrl &= ~SDHCI_CTRL_4BITBUS; + } + sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); + } - if (ios->bus_width == MMC_BUS_WIDTH_4) - ctrl |= SDHCI_CTRL_4BITBUS; - else - ctrl &= ~SDHCI_CTRL_4BITBUS; + ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL); if ((ios->timing == MMC_TIMING_SD_HS || ios->timing == MMC_TIMING_MMC_HS) @@ -1855,11 +1869,19 @@ int sdhci_add_host(struct sdhci_host *host) mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_300; else mmc->f_min = host->max_clk / SDHCI_MAX_DIV_SPEC_200; + mmc->f_max = host->max_clk; mmc->caps |= MMC_CAP_SDIO_IRQ; + /* + * A controller may support 8-bit width, but the board itself + * might not have the pins brought out. Boards that support + * 8-bit width must set "mmc->caps |= MMC_CAP_8_BIT_DATA;" in + * their platform code before calling sdhci_add_host(), and we + * won't assume 8-bit width for hosts without that CAP. + */ if (!(host->quirks & SDHCI_QUIRK_FORCE_1_BIT_DATA)) - mmc->caps |= MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA; + mmc->caps |= MMC_CAP_4_BIT_DATA; if (caps & SDHCI_CAN_DO_HISPD) mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index d52a7163b97..e42d7f00c06 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -76,7 +76,7 @@ #define SDHCI_CTRL_ADMA1 0x08 #define SDHCI_CTRL_ADMA32 0x10 #define SDHCI_CTRL_ADMA64 0x18 -#define SDHCI_CTRL_8BITBUS 0x20 +#define SDHCI_CTRL_8BITBUS 0x20 #define SDHCI_POWER_CONTROL 0x29 #define SDHCI_POWER_ON 0x01 @@ -155,6 +155,7 @@ #define SDHCI_CLOCK_BASE_SHIFT 8 #define SDHCI_MAX_BLOCK_MASK 0x00030000 #define SDHCI_MAX_BLOCK_SHIFT 16 +#define SDHCI_CAN_DO_8BIT 0x00040000 #define SDHCI_CAN_DO_ADMA2 0x00080000 #define SDHCI_CAN_DO_ADMA1 0x00100000 #define SDHCI_CAN_DO_HISPD 0x00200000 @@ -215,6 +216,8 @@ struct sdhci_ops { unsigned int (*get_max_clock)(struct sdhci_host *host); unsigned int (*get_min_clock)(struct sdhci_host *host); unsigned int (*get_timeout_clock)(struct sdhci_host *host); + int (*platform_8bit_width)(struct sdhci_host *host, + int width); void (*platform_send_init_74_clocks)(struct sdhci_host *host, u8 power_mode); unsigned int (*get_ro)(struct sdhci_host *host);