From: Quentin Schulz Date: Tue, 23 May 2017 09:48:08 +0000 (+0200) Subject: net: fec: add post PHY reset delay DT property X-Git-Tag: MMI-PSA29.97-13-9~5530^2~19 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=159a07604a99bd01e7db112de08d53dc4fcad109;p=GitHub%2FMotorolaMobilityLLC%2Fkernel-slsi.git net: fec: add post PHY reset delay DT property Some PHY require to wait for a bit after the reset GPIO has been toggled. This adds support for the DT property `phy-reset-post-delay` which gives the delay in milliseconds to wait after reset. If the DT property is not given, no delay is observed. Post reset delay greater than 1000ms are invalid. Signed-off-by: Quentin Schulz Reviewed-by: Andrew Lunn Acked-by: Fugang Duan Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/fsl-fec.txt b/Documentation/devicetree/bindings/net/fsl-fec.txt index a1e3693cca16..6f55bdd52f8a 100644 --- a/Documentation/devicetree/bindings/net/fsl-fec.txt +++ b/Documentation/devicetree/bindings/net/fsl-fec.txt @@ -15,6 +15,10 @@ Optional properties: - phy-reset-active-high : If present then the reset sequence using the GPIO specified in the "phy-reset-gpios" property is reversed (H=reset state, L=operation state). +- phy-reset-post-delay : Post reset delay in milliseconds. If present then + a delay of phy-reset-post-delay milliseconds will be observed after the + phy-reset-gpios has been toggled. Can be omitted thus no delay is + observed. Delay is in range of 1ms to 1000ms. Other delays are invalid. - phy-supply : regulator that powers the Ethernet PHY. - phy-handle : phandle to the PHY device connected to this device. - fixed-link : Assume a fixed link. See fixed-link.txt in the same directory. diff --git a/drivers/net/ethernet/freescale/fec_main.c b/drivers/net/ethernet/freescale/fec_main.c index 56a563f90b0b..f7c8649fd28f 100644 --- a/drivers/net/ethernet/freescale/fec_main.c +++ b/drivers/net/ethernet/freescale/fec_main.c @@ -3192,7 +3192,7 @@ static int fec_reset_phy(struct platform_device *pdev) { int err, phy_reset; bool active_high = false; - int msec = 1; + int msec = 1, phy_post_delay = 0; struct device_node *np = pdev->dev.of_node; if (!np) @@ -3209,6 +3209,11 @@ static int fec_reset_phy(struct platform_device *pdev) else if (!gpio_is_valid(phy_reset)) return 0; + err = of_property_read_u32(np, "phy-reset-post-delay", &phy_post_delay); + /* valid reset duration should be less than 1s */ + if (!err && phy_post_delay > 1000) + return -EINVAL; + active_high = of_property_read_bool(np, "phy-reset-active-high"); err = devm_gpio_request_one(&pdev->dev, phy_reset, @@ -3226,6 +3231,15 @@ static int fec_reset_phy(struct platform_device *pdev) gpio_set_value_cansleep(phy_reset, !active_high); + if (!phy_post_delay) + return 0; + + if (phy_post_delay > 20) + msleep(phy_post_delay); + else + usleep_range(phy_post_delay * 1000, + phy_post_delay * 1000 + 1000); + return 0; } #else /* CONFIG_OF */