From: Huang Shijie Date: Thu, 8 Sep 2011 02:47:11 +0000 (+0800) Subject: mtd: add GPMI-NAND driver in the config and Makefile X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=157550ff77cb5087033382782f4e856094466c16;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git mtd: add GPMI-NAND driver in the config and Makefile add the GPMI-NAND driver in the relevant Kconfig and Makefile in the MTD. Signed-off-by: Huang Shijie Acked-by: Marek Vasut Tested-by: Koen Beel Signed-off-by: Artem Bityutskiy --- diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 7ec5b494583f..42b7b861c74a 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -417,6 +417,19 @@ config MTD_NAND_NANDSIM The simulator may simulate various NAND flash chips for the MTD nand layer. +config MTD_NAND_GPMI_NAND + bool "GPMI NAND Flash Controller driver" + depends on MTD_NAND && (SOC_IMX23 || SOC_IMX28) + select MTD_PARTITIONS + select MTD_CMDLINE_PARTS + help + Enables NAND Flash support for IMX23 or IMX28. + The GPMI controller is very powerful, with the help of BCH + module, it can do the hardware ECC. The GPMI supports several + NAND flashs at the same time. The GPMI may conflicts with other + block, such as SD card. So pay attention to it when you enable + the GPMI. + config MTD_NAND_PLATFORM tristate "Support for generic platform NAND driver" help diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index c9334e9af912..618f4ba23699 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -48,5 +48,6 @@ obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o obj-$(CONFIG_MTD_NAND_RICOH) += r852.o obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o +obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ nand-objs := nand_base.o nand_bbt.o diff --git a/drivers/mtd/nand/gpmi-nand/Makefile b/drivers/mtd/nand/gpmi-nand/Makefile new file mode 100644 index 000000000000..3a462487c35e --- /dev/null +++ b/drivers/mtd/nand/gpmi-nand/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi_nand.o +gpmi_nand-objs += gpmi-nand.o +gpmi_nand-objs += gpmi-lib.o