From: Mikko Koivunen Date: Thu, 18 May 2017 12:12:50 +0000 (+0300) Subject: iio: light: rpr0521 poweroff for probe fails X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=12d74949133e2450533894ea01ce0c56646ce006;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git iio: light: rpr0521 poweroff for probe fails Set sensor measurement off after probe fail in pm_runtime_set_active() or iio_device_register(). Without this change sensor measurement stays on even though probe fails on these calls. This is maybe rare case, but causes constant power drain without any benefits when it happens. Power drain is 20-500uA, typically 180uA. Signed-off-by: Mikko Koivunen Acked-by: Daniel Baluta Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/light/rpr0521.c b/drivers/iio/light/rpr0521.c index 03504f6ecd3b..84d8d403e547 100644 --- a/drivers/iio/light/rpr0521.c +++ b/drivers/iio/light/rpr0521.c @@ -516,13 +516,26 @@ static int rpr0521_probe(struct i2c_client *client, ret = pm_runtime_set_active(&client->dev); if (ret < 0) - return ret; + goto err_poweroff; pm_runtime_enable(&client->dev); pm_runtime_set_autosuspend_delay(&client->dev, RPR0521_SLEEP_DELAY_MS); pm_runtime_use_autosuspend(&client->dev); - return iio_device_register(indio_dev); + ret = iio_device_register(indio_dev); + if (ret) + goto err_pm_disable; + + return 0; + +err_pm_disable: + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); +err_poweroff: + rpr0521_poweroff(data); + + return ret; } static int rpr0521_remove(struct i2c_client *client)