From: Danny Wood <danwood76@gmail.com>
Date: Tue, 10 Aug 2021 09:22:12 +0000 (+0100)
Subject: a7xelte: Cleanup device overlays
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=120b305549a146d36e0c23f2a9ff2da787ed9150;p=GitHub%2FLineageOS%2Fandroid_device_samsung_a7xelte.git

a7xelte: Cleanup device overlays

* Remove all that are defaults anyway
* Remove non-existant configurations
* Relocate any that have moved

Change-Id: Id3f7b4527d27735511070e441aa873fff2a7a464
---

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
index f0b42db..995fa98 100644
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -21,7 +21,6 @@
 <!-- These resources are around just to allow their values to be customized
      for different hardware and product builds. -->
 <resources>
-
     <!-- This string array should be overridden by the device to present a list of radio
          attributes.  This is used by the connectivity manager to decide which networks can coexist
          based on the hardware -->
@@ -35,17 +34,8 @@
         <!-- BLUETOOTH -->
         <item>"7,1"</item>
     </string-array>
-    
-    <!-- Power Management: Specifies whether to decouple the interactive state of the
-         device from the display on/off state. -->
-    <bool name="config_powerDecoupleInteractiveModeFromDisplay">false</bool>
 
-    <!-- Screen brightness used to dim the screen while dozing in a very low power state.
-         May be less than the minimum allowed brightness setting
-         that can be set by the user. -->
-    <integer name="config_screenBrightnessDoze">1</integer>
-    
-        <!-- If true, the doze component is not started until after the screen has been
+    <!-- If true, the doze component is not started until after the screen has been
          turned off and the screen off animation has been performed. -->
     <bool name="config_dozeAfterScreenOffByDefault">true</bool>
 
@@ -55,6 +45,7 @@
          to put the display into a low power state and allow the application processor
          to be suspended.  When the dream ends, the system will go to sleep as usual.
          Specify the component name or an empty string if none.
+
          Note that doze dreams are not subject to the same start conditions as ordinary dreams.
          Doze dreams will run whenever the power manager is in a dozing state. -->
     <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
@@ -68,9 +59,6 @@
          The default is false. -->
     <bool name="config_lidControlsSleep">true</bool>
 
-    <!-- Flag specifying whether VoLTE TTY is supported -->
-    <bool name="config_carrier_volte_tty_supported">true</bool>
-
     <!-- Configure mobile tcp buffer sizes in the form:
          rat-name:rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max
          If no value is found for the rat-name in use, the system default will be applied.
@@ -84,10 +72,6 @@
         <item>hspap:4094,87380,1220608,4096,16384,1220608</item>
     </string-array>
 
-    <!-- Configure wifi tcp buffersizes in the form:
-         rmem_min,rmem_def,rmem_max,wmem_min,wmem_def,wmem_max -->
-    <string name="config_wifi_tcp_buffers" translatable="false">524288,1048576,2097152,262144,524288,1048576</string>
-
     <!-- Flag indicating which package name can access the persistent data partition -->
     <string name="config_persistentDataPackageName" translatable="false">com.google.android.gms</string>
 
@@ -100,6 +84,10 @@
          before automatically restore the default connection.  Set -1 if the connection
          does not require auto-restore. -->
     <!-- the 6th element indicates boot-time dependency-met value. -->
+    <!-- NOTE: The telephony module is no longer reading the configuration below for available
+         APN types.  The set of APN types and relevant settings are specified within the telephony
+         module and are non-configurable.  Whether or not data connectivity over a cellular network
+         is available at all is controlled by the flag: config_moble_data_capable. -->
     <string-array translatable="false" name="networkAttributes">
         <item>wifi,1,1,1,-1,true</item>
         <item>mobile,0,0,0,-1,true</item>
@@ -115,19 +103,12 @@
         <item>wifi_p2p,13,1,0,-1,true</item>
         <item>mobile_ia,14,0,2,-1,true</item>
         <item>mobile_emergency,15,0,2,-1,true</item>
-        <item>mobile_bip,23,0,2,60000,true</item>
-        <item>mobile_cas,24,0,3,60000,true</item>
-        <item>mobile_xcap,27,0,2,60000,true</item>
-        <item>mobile_ent1,28,0,2,-1,true</item>
     </string-array>
 
     <!-- Flag indicating whether we should enable the automatic brightness in Settings.
          Software implementation will be used if config_hardware_auto_brightness_available is not set -->
     <bool name="config_automatic_brightness_available">true</bool>
 
-    <!-- The default iface on which to monitor data use -->
-    <string name="config_datause_iface" translatable="false">rmnet0</string>
-
     <!-- Stability requirements in milliseconds for accepting a new brightness level.  This is used
          for debouncing the light sensor.  Different constants are used to debounce the light sensor
          when adapting to brighter or darker environments.  This parameter controls how quickly
@@ -136,13 +117,25 @@
     <integer name="config_autoBrightnessBrighteningLightDebounce">2000</integer>
     <integer name="config_autoBrightnessDarkeningLightDebounce">4000</integer>
 
-    <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support.
-         The N entries of this array define N  1 zones as follows:
-         Zone 0:        0 <= LUX < array[0]
-         Zone 1:        array[0] <= LUX < array[1]
+    <!-- Array of light sensor lux values to define our levels for auto backlight brightness support.
+         The N entries of this array define N + 1 control points as follows:
+         (1-based arrays)
+
+         Point 1:            (0, value[1]):             lux <= 0
+         Point 2:     (level[1], value[2]):  0        < lux <= level[1]
+         Point 3:     (level[2], value[3]):  level[2] < lux <= level[3]
          ...
-         Zone N:        array[N - 1] <= LUX < array[N]
-         Zone N + 1     array[N] <= LUX < infinity
+         Point N+1: (level[N], value[N+1]):  level[N] < lux
+
+         The control points must be strictly increasing.  Each control point
+         corresponds to an entry in the brightness backlight values arrays.
+         For example, if lux == level[1] (first element of the levels array)
+         then the brightness will be determined by value[2] (second element
+         of the brightness values array).
+
+         Spline interpolation is used to determine the auto-brightness
+         backlight values for lux levels between these control points.
+
          Must be overridden in platform specific overlays -->
     <integer-array name="config_autoBrightnessLevels">
         <item>9</item>
@@ -221,47 +214,14 @@
     <!-- Wifi driver supports batched scan -->
     <bool translatable="false" name="config_wifi_batched_scan_supported">false</bool>
 
-    <!-- Indicate whether the SD card is accessible without removing the battery. -->
-    <bool name="config_batterySdCardAccessibility">true</bool>
-
-    <!-- Display low battery warning when battery level dips to this value.
-         Also, the battery stats are flushed to disk when we hit this level.  -->
-    <integer name="config_criticalBatteryWarningLevel">10</integer>
-
-    <!-- Display low battery warning when battery level dips to this value -->
-    <integer name="config_lowBatteryWarningLevel">20</integer>
-
-    <!-- Shutdown if the battery temperature exceeds (this value * 0.1) Celsius. -->
-    <integer name="config_shutdownBatteryTemperature">600</integer>
-
-    <!-- Minimum allowable screen brightness to use in a very dark room.
-         This value sets the floor for the darkest possible auto-brightness
-         adjustment.  It is expected to be somewhat less than the first entry in
-         config_autoBrightnessLcdBacklightValues so as to allow the user to have
-         some range of adjustment to dim the screen further than usual in very
-         dark rooms. The contents of the screen must still be clearly visible
-         in darkness (although they may not be visible in a bright room). -->
-    <integer name="config_screenBrightnessDark">1</integer>
-
     <!-- Slow brightness animation ramp rate in brightness units per second-->
     <integer translatable="false" name="config_brightness_ramp_rate_slow">80</integer>
 
-    <!-- Light sensor event rate in milliseconds for automatic brightness control. -->
-    <integer name="config_autoBrightnessLightSensorRate">250</integer>
-
     <!-- Initial light sensor event rate in milliseconds for automatic brightness control. This is
          used for obtaining the first light sample when the device stops dozing.
          Set this to 0 to disable this feature. -->
     <integer name="config_autoBrightnessInitialLightSensorRate">250</integer>
 
-    <!-- Period of time in which to consider light samples in milliseconds. -->
-    <integer name="config_autoBrightnessAmbientLightHorizon">5000</integer>
-
-    <!-- Amount of time it takes for the light sensor to warm up in milliseconds.
-         For this time after the screen turns on, the Power Manager
-         will not debounce light sensor readings -->
-    <integer name="config_lightSensorWarmupTime">0</integer>
-
     <!-- Allow automatic adjusting of the screen brightness while dozing in low power state. -->
     <bool name="config_allowAutoBrightnessWhileDozing">true</bool>
 
@@ -275,19 +235,9 @@
     <!-- Boolean indicating if current platform supports BLE peripheral mode -->
     <bool name="config_bluetooth_le_peripheral_mode_supported">true</bool>
 
-    <!-- reference volume index for music stream to limit headphone volume and display warning -->
-    <integer name="config_safe_media_volume_index">10</integer>
-
-    <!-- Whether to post reset runnable for all clients. Needed for some older
-        vendor fingerprint HAL implementations. -->
-    <bool name="config_fingerprintPostResetRunnableForAllClients">true</bool>
-
     <!-- For performance and storage reasons, limit the number of fingerprints per user -->
     <integer name="config_fingerprintMaxTemplatesPerUser">4</integer>
 
-    <!-- Whether to cleanup fingerprints upon connection to the daemon and when user switches -->
-    <bool name="config_cleanupUnusedFingerprints">false</bool>
-
     <!-- List of biometric sensors on the device, in decreasing strength. Consumed by AuthService
          when registering authenticators with BiometricService. Format must be ID:Modality:Strength,
          where: IDs are unique per device, Modality as defined in BiometricAuthenticator.java,
diff --git a/overlay/frameworks/opt/net/wifi/service/res/values/config.xml b/overlay/frameworks/opt/net/wifi/service/res/values/config.xml
new file mode 100644
index 0000000..e318d6b
--- /dev/null
+++ b/overlay/frameworks/opt/net/wifi/service/res/values/config.xml
@@ -0,0 +1,35 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (C) 2019 The Android Open Source Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<!-- These resources are around just to allow their values to be customized
+     for different hardware and product builds.  Do not translate.
+
+     NOTE: The naming convention is "config_camelCaseValue". Some legacy
+     entries do not follow the convention, but all new entries should. -->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- boolean indicating whether the WiFi chipset has 5GHz band support.
+         Note: This config is replacing the config_wifi_dual_band_support
+         since more bands may now be supported (such as 6GHz), the naming dual_band
+         is no longer indicative, and a separate config now exists for each band -->
+    <bool translatable="false" name ="config_wifi5ghzSupport">true</bool>
+
+    <!-- Boolean indicating whether the wifi chipset supports background scanning mechanism.
+         This mechanism allows the host to remain in suspend state and the dongle to actively
+         scan and wake the host when a configured SSID is detected by the dongle. This chipset
+         capability can provide power savings when wifi needs to be always kept on. -->
+    <bool translatable="false" name="config_wifi_background_scan_support">true</bool>
+</resources>
diff --git a/overlay/lineage-sdk/lineage/res/res/values/config.xml b/overlay/lineage-sdk/lineage/res/res/values/config.xml
index f743725..a15ad9c 100644
--- a/overlay/lineage-sdk/lineage/res/res/values/config.xml
+++ b/overlay/lineage-sdk/lineage/res/res/values/config.xml
@@ -1,10 +1,14 @@
 <?xml version="1.0" encoding="utf-8"?>
 <!--
      Copyright (C) 2015 The CyanogenMod Project
+                   2017-2021 The LineageOS Project
+
      Licensed under the Apache License, Version 2.0 (the "License");
      you may not use this file except in compliance with the License.
      You may obtain a copy of the License at
+
           http://www.apache.org/licenses/LICENSE-2.0
+
      Unless required by applicable law or agreed to in writing, software
      distributed under the License is distributed on an "AS IS" BASIS,
      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
@@ -12,30 +16,20 @@
      limitations under the License.
 -->
 <resources>
-
     <!-- Default value for proximity check on screen wake
      NOTE ! - Enable for devices that have a fast response proximity sensor (ideally < 300ms)-->
     <bool name="config_proximityCheckOnWake">true</bool>
     <integer name="config_proximityCheckTimeout">400</integer>
-    <bool name="config_proximityCheckOnWakeEnabledByDefault">false</bool>
 
     <!-- Color temperature settings for LiveDisplay. These were obtained by
          measuring the display at various color balance levels. -->
     <integer name="config_minColorTemperature">1900</integer>
     <integer name="config_maxColorTemperature">25000</integer>
 
-    <!-- Corresponds to color balance level of zero, this is the native
-         display temperature -->
-    <integer name="config_dayColorTemperature">6500</integer>
-    <integer name="config_nightColorTemperature">4800</integer>
-
     <!-- Ambient lux at which to enable outdoor mode when LiveDisplay is enabled -->
     <integer name="config_outdoorAmbientLux">10000</integer>
     <integer name="config_outdoorAmbientLuxHysteresis">1000</integer>
 
-    <!-- BurnIn protection. This should be enabled on devices that have OLED displays -->
-    <bool name="config_enableBurnInProtection">true</bool>
-
     <!-- All the capabilities of the LEDs on this device, stored as a bit field.
          This integer should equal the sum of the corresponding value for each
          of the following capabilities present:
@@ -50,9 +44,6 @@
          pulsating and RGB control would set this config to 75. -->
     <integer name="config_deviceLightCapabilities">0</integer>
 
-    <!-- Disable LiveDisplay by default -->
-    <integer name="config_defaultLiveDislayMode">0</integer>
-
     <!-- Hardware keys present on the device, stored as a bit field.
          This integer should equal the sum of the corresponding value for each
          of the following keys present:
@@ -80,4 +71,11 @@
          For example, a device with Home, Back and Menu keys would set this
          config to 7. -->
     <integer name="config_deviceHardwareWakeKeys">65</integer>
+
+    <!-- Whether to post reset runnable for all clients. Needed for some older
+        vendor fingerprint HAL implementations. -->
+    <bool name="config_fingerprintPostResetRunnableForAllClients">true</bool>
+
+    <!-- Whether to cleanup fingerprints upon connection to the daemon and when user switches -->
+    <bool name="config_cleanupUnusedFingerprints">false</bool>
 </resources>
diff --git a/overlay/packages/apps/Mms/res/xml/mms_config.xml b/overlay/packages/apps/Mms/res/xml/mms_config.xml
deleted file mode 100644
index 96c2a5c..0000000
--- a/overlay/packages/apps/Mms/res/xml/mms_config.xml
+++ /dev/null
@@ -1,38 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2009 The Android Open Source Project
-
-     Licensed under the Apache License, Version 2.0 (the "License");
-     you may not use this file except in compliance with the License.
-     You may obtain a copy of the License at
-
-          http://www.apache.org/licenses/LICENSE-2.0
-
-     Unless required by applicable law or agreed to in writing, software
-     distributed under the License is distributed on an "AS IS" BASIS,
-     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-     See the License for the specific language governing permissions and
-     limitations under the License.
--->
-
-<!-- Version History
-        version 1 - initial version.
-        version 2 - added recipientLimit.
-        version 3 - added min/max recycler values.
-        version 4 - added sms to mms text threshold.
--->
-
-<mms_config version="4">
-
-    <!-- Maximum message size in bytes for a MMS message -->
-    <int name="maxMessageSize">1045876</int>
-
-    <!-- Maximum height for an attached image -->
-    <int name="maxImageHeight">2592</int>
-
-    <!-- Maximum width for an attached image -->
-    <int name="maxImageWidth">2592</int>
-
-    <!-- UAProf URL -->
-    <string name="uaProfUrl">http://www.google.com/oha/rdf/ua-profile-kila.xml</string>
-
-</mms_config>
diff --git a/overlay/packages/apps/Settings/res/values/config.xml b/overlay/packages/apps/Settings/res/values/config.xml
deleted file mode 100644
index 787d474..0000000
--- a/overlay/packages/apps/Settings/res/values/config.xml
+++ /dev/null
@@ -1,31 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2013 The CyanogenMod Project
-
-     Licensed under the Apache License, Version 2.0 (the "License");
-     you may not use this file except in compliance with the License.
-     You may obtain a copy of the License at
-
-          http://www.apache.org/licenses/LICENSE-2.0
-
-     Unless required by applicable law or agreed to in writing, software
-     distributed under the License is distributed on an "AS IS" BASIS,
-     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-     See the License for the specific language governing permissions and
-     limitations under the License.
--->
-
-<resources>
-    <!-- Home button Wake Support. Some devices do not support this.
-         Setting to false will disable Home button Wake support -->
-    <bool name="config_show_homeWake">true</bool>
-
-    <!-- Defines the location of the fingerprint sensor on the device
-        0 = back
-        1 = front
-        2 = left side
-        3 = right side -->
-    <integer name="config_fingerprintSensorLocation">1</integer>
-
-    <!-- Volume Rocker Wake -->
-    <bool name="config_show_volumeRockerWake">true</bool>
-</resources>
diff --git a/overlay/packages/apps/Settings/res/values/lineage_config.xml b/overlay/packages/apps/Settings/res/values/lineage_config.xml
new file mode 100644
index 0000000..ec8746b
--- /dev/null
+++ b/overlay/packages/apps/Settings/res/values/lineage_config.xml
@@ -0,0 +1,27 @@
+<?xml version="1.0" encoding="utf-8"?>
+<!--
+     Copyright (C) 2016 The CyanogenMod Project
+     Copyright (C) 2018 The LineageOS Project
+
+     Licensed under the Apache License, Version 2.0 (the "License");
+     you may not use this file except in compliance with the License.
+     You may obtain a copy of the License at
+
+          http://www.apache.org/licenses/LICENSE-2.0
+
+     Unless required by applicable law or agreed to in writing, software
+     distributed under the License is distributed on an "AS IS" BASIS,
+     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+     See the License for the specific language governing permissions and
+     limitations under the License.
+-->
+
+<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2">
+    <!-- Defines the location of the fingerprint sensor on the device
+         0 = back
+         1 = front
+         2 = left side
+         3 = right side
+    -->
+    <integer name="config_fingerprintSensorLocation">1</integer>
+</resources>
diff --git a/overlay/packages/services/Telephony/res/values/config.xml b/overlay/packages/services/Telephony/res/values/config.xml
deleted file mode 100644
index 302311d..0000000
--- a/overlay/packages/services/Telephony/res/values/config.xml
+++ /dev/null
@@ -1,23 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (C) 2009 The Android Open Source Project
-
-     Licensed under the Apache License, Version 2.0 (the "License");
-     you may not use this file except in compliance with the License.
-     You may obtain a copy of the License at
-
-          http://www.apache.org/licenses/LICENSE-2.0
-
-     Unless required by applicable law or agreed to in writing, software
-     distributed under the License is distributed on an "AS IS" BASIS,
-     WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-     See the License for the specific language governing permissions and
-     limitations under the License.
--->
-
-<!-- Phone app resources that may need to be customized
-     for different hardware or product builds. -->
-
-<resources>
-    <!-- Show enabled lte option for lte device -->
-    <bool name="config_enabled_lte" translatable="false">true</bool>
-</resources>