From: Mauro Carvalho Chehab Date: Thu, 31 Aug 2017 11:16:17 +0000 (-0400) Subject: media: fe_property_parameters.rst: better define properties usage X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=1181415dc6e3d60b7eaf8b18c402b331b7744515;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git media: fe_property_parameters.rst: better define properties usage Several frontend properties are specific to a subset of the delivery systems. Make it clearer when describing each property. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/media/uapi/dvb/fe_property_parameters.rst b/Documentation/media/uapi/dvb/fe_property_parameters.rst index c6eb74f59b00..e085e84fef38 100644 --- a/Documentation/media/uapi/dvb/fe_property_parameters.rst +++ b/Documentation/media/uapi/dvb/fe_property_parameters.rst @@ -111,6 +111,8 @@ DTV_BANDWIDTH_HZ Bandwidth for the channel, in HZ. +Should be set only for terrestrial delivery systems. + Possible values: ``1712000``, ``5000000``, ``6000000``, ``7000000``, ``8000000``, ``10000000``. @@ -148,6 +150,7 @@ Specifies if the frontend should do spectral inversion or not. The acceptable values are defined by :c:type:`fe_spectral_inversion`. + .. _DTV-DISEQC-MASTER: DTV_DISEQC_MASTER @@ -161,8 +164,9 @@ Currently not implemented. DTV_SYMBOL_RATE =============== -Digital TV symbol rate, in bauds (symbols/second). Used on cable -standards. +Used on cable and satellite delivery systems. + +Digital TV symbol rate, in bauds (symbols/second). .. _DTV-INNER-FEC: @@ -170,7 +174,7 @@ standards. DTV_INNER_FEC ============= -Used cable/satellite transmissions. +Used on cable and satellite delivery systems. The acceptable values are defined by :c:type:`fe_code_rate`. @@ -180,6 +184,8 @@ The acceptable values are defined by :c:type:`fe_code_rate`. DTV_VOLTAGE =========== +Used on satellite delivery systems. + The voltage is usually used with non-DiSEqC capable LNBs to switch the polarzation (horizontal/vertical). When using DiSEqC epuipment this voltage has to be switched consistently to the DiSEqC commands as @@ -201,6 +207,8 @@ Currently not used. DTV_PILOT ========= +Used on DVB-S2. + Sets DVB-S2 pilot. The acceptable values are defined by :c:type:`fe_pilot`. @@ -211,7 +219,9 @@ The acceptable values are defined by :c:type:`fe_pilot`. DTV_ROLLOFF =========== -Sets DVB-S2 rolloff +Used on DVB-S2. + +Sets DVB-S2 rolloff. The acceptable values are defined by :c:type:`fe_rolloff`. @@ -245,7 +255,7 @@ Currently not implemented. DTV_DELIVERY_SYSTEM =================== -Specifies the type of Delivery system. +Specifies the type of the delivery system. The acceptable values are defined by :c:type:`fe_delivery_system`. @@ -255,6 +265,8 @@ The acceptable values are defined by :c:type:`fe_delivery_system`. DTV_ISDBT_PARTIAL_RECEPTION =========================== +Used only on ISDB. + If ``DTV_ISDBT_SOUND_BROADCASTING`` is '0' this bit-field represents whether the channel is in partial reception mode or not. @@ -273,6 +285,8 @@ Possible values: 0, 1, -1 (AUTO) DTV_ISDBT_SOUND_BROADCASTING ============================ +Used only on ISDB. + This field represents whether the other DTV_ISDBT_*-parameters are referring to an ISDB-T and an ISDB-Tsb channel. (See also ``DTV_ISDBT_PARTIAL_RECEPTION``). @@ -285,6 +299,8 @@ Possible values: 0, 1, -1 (AUTO) DTV_ISDBT_SB_SUBCHANNEL_ID ========================== +Used only on ISDB. + This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. (Note of the author: This might not be the correct description of the @@ -320,6 +336,8 @@ Possible values: 0 .. 41, -1 (AUTO) DTV_ISDBT_SB_SEGMENT_IDX ======================== +Used only on ISDB. + This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. ``DTV_ISDBT_SB_SEGMENT_IDX`` gives the index of the segment to be @@ -336,6 +354,8 @@ Note: This value cannot be determined by an automatic channel search. DTV_ISDBT_SB_SEGMENT_COUNT ========================== +Used only on ISDB. + This field only applies if ``DTV_ISDBT_SOUND_BROADCASTING`` is '1'. ``DTV_ISDBT_SB_SEGMENT_COUNT`` gives the total count of connected @@ -351,6 +371,8 @@ Note: This value cannot be determined by an automatic channel search. DTV-ISDBT-LAYER[A-C] parameters =============================== +Used only on ISDB. + ISDB-T channels can be coded hierarchically. As opposed to DVB-T in ISDB-T hierarchical layers can be decoded simultaneously. For that reason a ISDB-T demodulator has 3 Viterbi and 3 Reed-Solomon decoders. @@ -367,6 +389,8 @@ There are 3 parameter sets, for Layers A, B and C. DTV_ISDBT_LAYER_ENABLED ----------------------- +Used only on ISDB. + Hierarchical reception in ISDB-T is achieved by enabling or disabling layers in the decoding process. Setting all bits of ``DTV_ISDBT_LAYER_ENABLED`` to '1' forces all layers (if applicable) to @@ -397,6 +421,8 @@ Only the values of the first 3 bits are used. Other bits will be silently ignore DTV_ISDBT_LAYER[A-C]_FEC ------------------------ +Used only on ISDB. + The Forward Error Correction mechanism used by a given ISDB Layer, as defined by :c:type:`fe_code_rate`. @@ -410,6 +436,8 @@ Possible values are: ``FEC_AUTO``, ``FEC_1_2``, ``FEC_2_3``, ``FEC_3_4``, DTV_ISDBT_LAYER[A-C]_MODULATION ------------------------------- +Used only on ISDB. + The modulation used by a given ISDB Layer, as defined by :c:type:`fe_modulation`. @@ -428,6 +456,8 @@ Possible values are: ``QAM_AUTO``, ``QPSK``, ``QAM_16``, ``QAM_64``, ``DQPSK`` DTV_ISDBT_LAYER[A-C]_SEGMENT_COUNT ---------------------------------- +Used only on ISDB. + Possible values: 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, -1 (AUTO) Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and @@ -517,6 +547,8 @@ Note: Truth table for ``DTV_ISDBT_SOUND_BROADCASTING`` and DTV_ISDBT_LAYER[A-C]_TIME_INTERLEAVING -------------------------------------- +Used only on ISDB. + Valid values: 0, 1, 2, 4, -1 (AUTO) when DTV_ISDBT_SOUND_BROADCASTING is active, value 8 is also valid. @@ -590,6 +622,8 @@ TMCC-structure, as shown in the table below. DTV_ATSCMH_FIC_VER ------------------ +Used only on ATSC-MH. + Version number of the FIC (Fast Information Channel) signaling data. FIC is used for relaying information to allow rapid service acquisition @@ -603,6 +637,8 @@ Possible values: 0, 1, 2, 3, ..., 30, 31 DTV_ATSCMH_PARADE_ID -------------------- +Used only on ATSC-MH. + Parade identification number A parade is a collection of up to eight MH groups, conveying one or two @@ -616,6 +652,8 @@ Possible values: 0, 1, 2, 3, ..., 126, 127 DTV_ATSCMH_NOG -------------- +Used only on ATSC-MH. + Number of MH groups per MH subframe for a designated parade. Possible values: 1, 2, 3, 4, 5, 6, 7, 8 @@ -626,6 +664,8 @@ Possible values: 1, 2, 3, 4, 5, 6, 7, 8 DTV_ATSCMH_TNOG --------------- +Used only on ATSC-MH. + Total number of MH groups including all MH groups belonging to all MH parades in one MH subframe. @@ -637,6 +677,8 @@ Possible values: 0, 1, 2, 3, ..., 30, 31 DTV_ATSCMH_SGN -------------- +Used only on ATSC-MH. + Start group number. Possible values: 0, 1, 2, 3, ..., 14, 15 @@ -647,6 +689,8 @@ Possible values: 0, 1, 2, 3, ..., 14, 15 DTV_ATSCMH_PRC -------------- +Used only on ATSC-MH. + Parade repetition cycle. Possible values: 1, 2, 3, 4, 5, 6, 7, 8 @@ -657,6 +701,8 @@ Possible values: 1, 2, 3, 4, 5, 6, 7, 8 DTV_ATSCMH_RS_FRAME_MODE ------------------------ +Used only on ATSC-MH. + Reed Solomon (RS) frame mode. The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`. @@ -667,6 +713,8 @@ The acceptable values are defined by :c:type:`atscmh_rs_frame_mode`. DTV_ATSCMH_RS_FRAME_ENSEMBLE ---------------------------- +Used only on ATSC-MH. + Reed Solomon(RS) frame ensemble. The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`. @@ -677,6 +725,8 @@ The acceptable values are defined by :c:type:`atscmh_rs_frame_ensemble`. DTV_ATSCMH_RS_CODE_MODE_PRI --------------------------- +Used only on ATSC-MH. + Reed Solomon (RS) code mode (primary). The acceptable values are defined by :c:type:`atscmh_rs_code_mode`. @@ -687,6 +737,8 @@ The acceptable values are defined by :c:type:`atscmh_rs_code_mode`. DTV_ATSCMH_RS_CODE_MODE_SEC --------------------------- +Used only on ATSC-MH. + Reed Solomon (RS) code mode (secondary). The acceptable values are defined by :c:type:`atscmh_rs_code_mode`. @@ -697,6 +749,8 @@ The acceptable values are defined by :c:type:`atscmh_rs_code_mode`. DTV_ATSCMH_SCCC_BLOCK_MODE -------------------------- +Used only on ATSC-MH. + Series Concatenated Convolutional Code Block Mode. The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`. @@ -707,6 +761,8 @@ The acceptable values are defined by :c:type:`atscmh_sccc_block_mode`. DTV_ATSCMH_SCCC_CODE_MODE_A --------------------------- +Used only on ATSC-MH. + Series Concatenated Convolutional Code Rate. The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`. @@ -716,6 +772,8 @@ The acceptable values are defined by :c:type:`atscmh_sccc_code_mode`. DTV_ATSCMH_SCCC_CODE_MODE_B --------------------------- +Used only on ATSC-MH. + Series Concatenated Convolutional Code Rate. Possible values are the same as documented on enum @@ -727,6 +785,8 @@ Possible values are the same as documented on enum DTV_ATSCMH_SCCC_CODE_MODE_C --------------------------- +Used only on ATSC-MH. + Series Concatenated Convolutional Code Rate. Possible values are the same as documented on enum @@ -738,6 +798,8 @@ Possible values are the same as documented on enum DTV_ATSCMH_SCCC_CODE_MODE_D --------------------------- +Used only on ATSC-MH. + Series Concatenated Convolutional Code Rate. Possible values are the same as documented on enum @@ -797,9 +859,11 @@ The acceptable values are defined by :c:type:`fe_guard_interval`. DTV_TRANSMISSION_MODE ===================== + +Used only on OFTM-based standards, e. g. DVB-T/T2, ISDB-T, DTMB. + Specifies the FFT size (with corresponds to the approximate number of -carriers) used by the standard. This is used only on OFTM-based standards, -e. g. DVB-T/T2, ISDB-T, DTMB. +carriers) used by the standard. The acceptable values are defined by :c:type:`fe_transmit_mode`. @@ -832,6 +896,8 @@ The acceptable values are defined by :c:type:`fe_transmit_mode`. DTV_HIERARCHY ============= +Used only on DVB-T and DVB-T2. + Frontend hierarchy. The acceptable values are defined by :c:type:`fe_hierarchy`. @@ -842,6 +908,8 @@ The acceptable values are defined by :c:type:`fe_hierarchy`. DTV_STREAM_ID ============= +Used on DVB-S2, DVB-T2 and ISDB-S. + DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on a single transport stream. This property enables the DVB driver to handle substream filtering, when supported by the hardware. By default,