From: Jim Dickerson Date: Mon, 18 Sep 2017 14:39:14 +0000 (+0300) Subject: usb: pci-quirks.c: Corrected timeout values used in handshake X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=114ec3a6f9096d211a4aff4277793ba969a62c73;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git usb: pci-quirks.c: Corrected timeout values used in handshake Servers were emitting failed handoff messages but were not waiting the full 1 second as designated in section 4.22.1 of the eXtensible Host Controller Interface specifications. The handshake was using wrong units so calls were made with milliseconds not microseconds. Comments referenced 5 seconds not 1 second as in specs. The wrong units were also corrected in a second handshake call. Cc: Signed-off-by: Jim Dickerson Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 658d9d1f9ea3..e02dbb1e1cdd 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -1022,7 +1022,7 @@ EXPORT_SYMBOL_GPL(usb_disable_xhci_ports); * * Takes care of the handoff between the Pre-OS (i.e. BIOS) and the OS. * It signals to the BIOS that the OS wants control of the host controller, - * and then waits 5 seconds for the BIOS to hand over control. + * and then waits 1 second for the BIOS to hand over control. * If we timeout, assume the BIOS is broken and take control anyway. */ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) @@ -1069,9 +1069,9 @@ static void quirk_usb_handoff_xhci(struct pci_dev *pdev) if (val & XHCI_HC_BIOS_OWNED) { writel(val | XHCI_HC_OS_OWNED, base + ext_cap_offset); - /* Wait for 5 seconds with 10 microsecond polling interval */ + /* Wait for 1 second with 10 microsecond polling interval */ timeout = handshake(base + ext_cap_offset, XHCI_HC_BIOS_OWNED, - 0, 5000, 10); + 0, 1000000, 10); /* Assume a buggy BIOS and take HC ownership anyway */ if (timeout) { @@ -1100,7 +1100,7 @@ hc_init: * operational or runtime registers. Wait 5 seconds and no more. */ timeout = handshake(op_reg_base + XHCI_STS_OFFSET, XHCI_STS_CNR, 0, - 5000, 10); + 5000000, 10); /* Assume a buggy HC and start HC initialization anyway */ if (timeout) { val = readl(op_reg_base + XHCI_STS_OFFSET);