From: Tony Luck Date: Tue, 12 Aug 2008 17:34:20 +0000 (-0700) Subject: [IA64] Ensure cpu0 can access per-cpu variables in early boot code X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=10617bbe84628eb18ab5f723d3ba35005adde143;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git [IA64] Ensure cpu0 can access per-cpu variables in early boot code ia64 handles per-cpu variables a litle differently from other architectures in that it maps the physical memory allocated for each cpu at a constant virtual address (0xffffffffffff0000). This mapping is not enabled until the architecture specific cpu_init() function is run, which causes problems since some generic code is run before this point. In particular when CONFIG_PRINTK_TIME is enabled, the boot cpu will trap on the access to per-cpu memory at the first printk() call so the boot will fail without the kernel printing anything to the console. Fix this by allocating percpu memory for cpu0 in the kernel data section and doing all initialization to enable percpu access in head.S before calling any generic code. Other cpus must take care not to access per-cpu variables too early, but their code path from start_secondary() to cpu_init() is all in arch/ia64 Signed-off-by: Tony Luck --- diff --git a/arch/ia64/kernel/head.S b/arch/ia64/kernel/head.S index 41c712917ff7..8bdea8eb62e3 100644 --- a/arch/ia64/kernel/head.S +++ b/arch/ia64/kernel/head.S @@ -359,7 +359,31 @@ start_ap: mov ar.rsc=0 // place RSE in enforced lazy mode ;; loadrs // clear the dirty partition - mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base + movl r19=__phys_per_cpu_start + mov r18=PERCPU_PAGE_SIZE + ;; +#ifndef CONFIG_SMP + add r19=r19,r18 + ;; +#else +(isAP) br.few 2f + mov r20=r19 + sub r19=r19,r18 + ;; + shr.u r18=r18,3 +1: + ld8 r21=[r20],8;; + st8[r19]=r21,8 + adds r18=-1,r18;; + cmp4.lt p7,p6=0,r18 +(p7) br.cond.dptk.few 1b +2: +#endif + tpa r19=r19 + ;; + .pred.rel.mutex isBP,isAP +(isBP) mov IA64_KR(PER_CPU_DATA)=r19 // per-CPU base for cpu0 +(isAP) mov IA64_KR(PER_CPU_DATA)=r0 // clear physical per-CPU base ;; mov ar.bspstore=r2 // establish the new RSE stack ;; diff --git a/arch/ia64/kernel/setup.c b/arch/ia64/kernel/setup.c index 593279f33e96..c27d5b2c182b 100644 --- a/arch/ia64/kernel/setup.c +++ b/arch/ia64/kernel/setup.c @@ -927,17 +927,19 @@ cpu_init (void) if (smp_processor_id() == 0) { cpu_set(0, per_cpu(cpu_sibling_map, 0)); cpu_set(0, cpu_core_map[0]); + } else { + /* + * Set ar.k3 so that assembly code in MCA handler can compute + * physical addresses of per cpu variables with a simple: + * phys = ar.k3 + &per_cpu_var + * and the alt-dtlb-miss handler can set per-cpu mapping into + * the TLB when needed. head.S already did this for cpu0. + */ + ia64_set_kr(IA64_KR_PER_CPU_DATA, + ia64_tpa(cpu_data) - (long) __per_cpu_start); } #endif - /* - * We set ar.k3 so that assembly code in MCA handler can compute - * physical addresses of per cpu variables with a simple: - * phys = ar.k3 + &per_cpu_var - */ - ia64_set_kr(IA64_KR_PER_CPU_DATA, - ia64_tpa(cpu_data) - (long) __per_cpu_start); - get_max_cacheline_size(); /* diff --git a/arch/ia64/kernel/smpboot.c b/arch/ia64/kernel/smpboot.c index 03f1a9908afc..b39853a292d5 100644 --- a/arch/ia64/kernel/smpboot.c +++ b/arch/ia64/kernel/smpboot.c @@ -467,7 +467,9 @@ start_secondary (void *unused) { /* Early console may use I/O ports */ ia64_set_kr(IA64_KR_IO_BASE, __pa(ia64_iobase)); +#ifndef CONFIG_PRINTK_TIME Dprintk("start_secondary: starting CPU 0x%x\n", hard_smp_processor_id()); +#endif efi_map_pal_code(); cpu_init(); preempt_disable(); diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 5a77206c2492..de71da811cd6 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -215,6 +215,9 @@ SECTIONS /* Per-cpu data: */ percpu : { } :percpu . = ALIGN(PERCPU_PAGE_SIZE); +#ifdef CONFIG_SMP + . = . + PERCPU_PAGE_SIZE; /* cpu0 per-cpu space */ +#endif __phys_per_cpu_start = .; .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET) { diff --git a/arch/ia64/mm/contig.c b/arch/ia64/mm/contig.c index 798bf9835a51..e566ff43884a 100644 --- a/arch/ia64/mm/contig.c +++ b/arch/ia64/mm/contig.c @@ -163,8 +163,14 @@ per_cpu_init (void) * get_zeroed_page(). */ if (first_time) { + void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + first_time=0; - for (cpu = 0; cpu < NR_CPUS; cpu++) { + + __per_cpu_offset[0] = (char *) cpu0_data - __per_cpu_start; + per_cpu(local_per_cpu_offset, 0) = __per_cpu_offset[0]; + + for (cpu = 1; cpu < NR_CPUS; cpu++) { memcpy(cpu_data, __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); __per_cpu_offset[cpu] = (char *) cpu_data - __per_cpu_start; cpu_data += PERCPU_PAGE_SIZE; @@ -177,7 +183,7 @@ per_cpu_init (void) static inline void alloc_per_cpu_data(void) { - cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS, + cpu_data = __alloc_bootmem(PERCPU_PAGE_SIZE * NR_CPUS-1, PERCPU_PAGE_SIZE, __pa(MAX_DMA_ADDRESS)); } #else diff --git a/arch/ia64/mm/discontig.c b/arch/ia64/mm/discontig.c index d83125e1ed27..78026aabaa7f 100644 --- a/arch/ia64/mm/discontig.c +++ b/arch/ia64/mm/discontig.c @@ -143,7 +143,11 @@ static void *per_cpu_node_setup(void *cpu_data, int node) int cpu; for_each_possible_early_cpu(cpu) { - if (node == node_cpuid[cpu].nid) { + if (cpu == 0) { + void *cpu0_data = __phys_per_cpu_start - PERCPU_PAGE_SIZE; + __per_cpu_offset[cpu] = (char*)cpu0_data - + __per_cpu_start; + } else if (node == node_cpuid[cpu].nid) { memcpy(__va(cpu_data), __phys_per_cpu_start, __per_cpu_end - __per_cpu_start); __per_cpu_offset[cpu] = (char*)__va(cpu_data) -