From: Axel Lin Date: Thu, 15 Mar 2012 12:00:07 +0000 (+0800) Subject: regulator: Refactor to use one da9052_ldo_ops/da9052_dcdc_ops for all LDOs/DCDCs X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0ec446ea9a1cc86bfeb0c724a490701271d02fa5;p=GitHub%2Fexynos8895%2Fandroid_kernel_samsung_universal8895.git regulator: Refactor to use one da9052_ldo_ops/da9052_dcdc_ops for all LDOs/DCDCs In current implementation, da9052_ldo_ops and da9052_ldo5_6_ops are very similar, only the set_voltage is slightly different. da9052_buckperi_ops and da9052_dcdc_ops are also similar. This patch adds da9052_regulator_set_voltage for the set_voltage callback used by all LDOs and DCDCs. Rework da9052_get_regulator_voltage_sel and da9052_set_dcdc_voltage to make it possible to be shared by all DCDCs. Rework da9052_list_voltage to make it to be shared by all DCDCs and LDOs. Then we can remove da9052_ldo5_6_ops and da9052_buckperi_ops. We can also remove DA9052_LDO5_6 and DA9052_BUCKPERI macros which is not used now. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c index ddcba361bad6..7eb7293bcd12 100644 --- a/drivers/regulator/da9052-regulator.c +++ b/drivers/regulator/da9052-regulator.c @@ -189,36 +189,23 @@ static int da9052_dcdc_set_current_limit(struct regulator_dev *rdev, int min_uA, reg_val << 6); } -static int da9052_list_buckperi_voltage(struct regulator_dev *rdev, - unsigned int selector) -{ - struct da9052_regulator *regulator = rdev_get_drvdata(rdev); - struct da9052_regulator_info *info = regulator->info; - int volt_uV; - - if ((regulator->da9052->chip_id == DA9052) && - (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) { - volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV) - + info->min_uV); - volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) - * (DA9052_BUCK_PERI_3uV_STEP); - } else - volt_uV = (selector * info->step_uV) + info->min_uV; - - if (volt_uV > info->max_uV) - return -EINVAL; - - return volt_uV; -} - static int da9052_list_voltage(struct regulator_dev *rdev, unsigned int selector) { struct da9052_regulator *regulator = rdev_get_drvdata(rdev); struct da9052_regulator_info *info = regulator->info; + int id = rdev_get_id(rdev); int volt_uV; - volt_uV = info->min_uV + info->step_uV * selector; + if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052) + && (selector >= DA9052_BUCK_PERI_REG_MAP_UPTO_3uV)) { + volt_uV = ((DA9052_BUCK_PERI_REG_MAP_UPTO_3uV * info->step_uV) + + info->min_uV); + volt_uV += (selector - DA9052_BUCK_PERI_REG_MAP_UPTO_3uV) + * (DA9052_BUCK_PERI_3uV_STEP); + } else { + volt_uV = (selector * info->step_uV) + info->min_uV; + } if (volt_uV > info->max_uV) return -EINVAL; @@ -226,13 +213,13 @@ static int da9052_list_voltage(struct regulator_dev *rdev, return volt_uV; } -static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev, +static int da9052_regulator_set_voltage(struct regulator_dev *rdev, int min_uV, int max_uV, unsigned int *selector) { struct da9052_regulator *regulator = rdev_get_drvdata(rdev); struct da9052_regulator_info *info = regulator->info; - int offset = rdev_get_id(rdev); + int id = rdev_get_id(rdev); int ret; ret = verify_range(info, min_uV, max_uV); @@ -242,113 +229,43 @@ static int da9052_regulator_set_voltage_int(struct regulator_dev *rdev, if (min_uV < info->min_uV) min_uV = info->min_uV; - *selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV); + if ((id == DA9052_ID_BUCK4) && (regulator->da9052->chip_id == DA9052) + && (min_uV >= DA9052_CONST_3uV)) { + *selector = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV + + DIV_ROUND_UP(min_uV - DA9052_CONST_3uV, + DA9052_BUCK_PERI_3uV_STEP); + } else { + *selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV); + } ret = da9052_list_voltage(rdev, *selector); if (ret < 0) return ret; - return da9052_reg_update(regulator->da9052, - DA9052_BUCKCORE_REG + offset, + ret = da9052_reg_update(regulator->da9052, + DA9052_BUCKCORE_REG + id, (1 << info->volt_shift) - 1, *selector); -} - -static int da9052_set_ldo_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV, - unsigned int *selector) -{ - return da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); -} - -static int da9052_set_ldo5_6_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV, - unsigned int *selector) -{ - struct da9052_regulator *regulator = rdev_get_drvdata(rdev); - struct da9052_regulator_info *info = regulator->info; - int ret; - - ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); if (ret < 0) return ret; - /* Some LDOs are DVC controlled which requires enabling of - * the LDO activate bit to implment the changes on the - * LDO output. - */ - return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, - info->activate_bit, info->activate_bit); -} - -static int da9052_set_dcdc_voltage(struct regulator_dev *rdev, - int min_uV, int max_uV, - unsigned int *selector) -{ - struct da9052_regulator *regulator = rdev_get_drvdata(rdev); - struct da9052_regulator_info *info = regulator->info; - int ret; - - ret = da9052_regulator_set_voltage_int(rdev, min_uV, max_uV, selector); - if (ret < 0) - return ret; - - /* Some DCDCs are DVC controlled which requires enabling of - * the DCDC activate bit to implment the changes on the - * DCDC output. - */ - return da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, - info->activate_bit, info->activate_bit); -} - -static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev) -{ - struct da9052_regulator *regulator = rdev_get_drvdata(rdev); - struct da9052_regulator_info *info = regulator->info; - int offset = rdev_get_id(rdev); - int ret; - - ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset); - if (ret < 0) - return ret; - - ret &= ((1 << info->volt_shift) - 1); + /* Some LDOs and DCDCs are DVC controlled which requires enabling of + * the activate bit to implment the changes on the output. + */ + switch (id) { + case DA9052_ID_BUCK1: + case DA9052_ID_BUCK2: + case DA9052_ID_BUCK3: + case DA9052_ID_LDO2: + case DA9052_ID_LDO3: + ret = da9052_reg_update(regulator->da9052, DA9052_SUPPLY_REG, + info->activate_bit, info->activate_bit); + break; + } return ret; } -static int da9052_set_buckperi_voltage(struct regulator_dev *rdev, int min_uV, - int max_uV, unsigned int *selector) -{ - struct da9052_regulator *regulator = rdev_get_drvdata(rdev); - struct da9052_regulator_info *info = regulator->info; - int offset = rdev_get_id(rdev); - int ret; - - ret = verify_range(info, min_uV, max_uV); - if (ret < 0) - return ret; - - if (min_uV < info->min_uV) - min_uV = info->min_uV; - - if ((regulator->da9052->chip_id == DA9052) && - (min_uV >= DA9052_CONST_3uV)) - *selector = DA9052_BUCK_PERI_REG_MAP_UPTO_3uV + - DIV_ROUND_UP(min_uV - DA9052_CONST_3uV, - DA9052_BUCK_PERI_3uV_STEP); - else - *selector = DIV_ROUND_UP(min_uV - info->min_uV, info->step_uV); - - ret = da9052_list_buckperi_voltage(rdev, *selector); - if (ret < 0) - return ret; - - return da9052_reg_update(regulator->da9052, - DA9052_BUCKCORE_REG + offset, - (1 << info->volt_shift) - 1, *selector); -} - -static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev) +static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev) { struct da9052_regulator *regulator = rdev_get_drvdata(rdev); struct da9052_regulator_info *info = regulator->info; @@ -364,21 +281,8 @@ static int da9052_get_buckperi_voltage_sel(struct regulator_dev *rdev) return ret; } -static struct regulator_ops da9052_buckperi_ops = { - .list_voltage = da9052_list_buckperi_voltage, - .get_voltage_sel = da9052_get_buckperi_voltage_sel, - .set_voltage = da9052_set_buckperi_voltage, - - .get_current_limit = da9052_dcdc_get_current_limit, - .set_current_limit = da9052_dcdc_set_current_limit, - - .is_enabled = da9052_regulator_is_enabled, - .enable = da9052_regulator_enable, - .disable = da9052_regulator_disable, -}; - static struct regulator_ops da9052_dcdc_ops = { - .set_voltage = da9052_set_dcdc_voltage, + .set_voltage = da9052_regulator_set_voltage, .get_current_limit = da9052_dcdc_get_current_limit, .set_current_limit = da9052_dcdc_set_current_limit, @@ -389,18 +293,8 @@ static struct regulator_ops da9052_dcdc_ops = { .disable = da9052_regulator_disable, }; -static struct regulator_ops da9052_ldo5_6_ops = { - .set_voltage = da9052_set_ldo5_6_voltage, - - .list_voltage = da9052_list_voltage, - .get_voltage_sel = da9052_get_regulator_voltage_sel, - .is_enabled = da9052_regulator_is_enabled, - .enable = da9052_regulator_enable, - .disable = da9052_regulator_disable, -}; - static struct regulator_ops da9052_ldo_ops = { - .set_voltage = da9052_set_ldo_voltage, + .set_voltage = da9052_regulator_set_voltage, .list_voltage = da9052_list_voltage, .get_voltage_sel = da9052_get_regulator_voltage_sel, @@ -409,24 +303,6 @@ static struct regulator_ops da9052_ldo_ops = { .disable = da9052_regulator_disable, }; -#define DA9052_LDO5_6(_id, step, min, max, sbits, ebits, abits) \ -{\ - .reg_desc = {\ - .name = #_id,\ - .ops = &da9052_ldo5_6_ops,\ - .type = REGULATOR_VOLTAGE,\ - .id = DA9052_ID_##_id,\ - .n_voltages = (max - min) / step + 1, \ - .owner = THIS_MODULE,\ - },\ - .min_uV = (min) * 1000,\ - .max_uV = (max) * 1000,\ - .step_uV = (step) * 1000,\ - .volt_shift = (sbits),\ - .en_bit = (ebits),\ - .activate_bit = (abits),\ -} - #define DA9052_LDO(_id, step, min, max, sbits, ebits, abits) \ {\ .reg_desc = {\ @@ -463,32 +339,14 @@ static struct regulator_ops da9052_ldo_ops = { .activate_bit = (abits),\ } -#define DA9052_BUCKPERI(_id, step, min, max, sbits, ebits, abits) \ -{\ - .reg_desc = {\ - .name = #_id,\ - .ops = &da9052_buckperi_ops,\ - .type = REGULATOR_VOLTAGE,\ - .id = DA9052_ID_##_id,\ - .n_voltages = (max - min) / step + 1, \ - .owner = THIS_MODULE,\ - },\ - .min_uV = (min) * 1000,\ - .max_uV = (max) * 1000,\ - .step_uV = (step) * 1000,\ - .volt_shift = (sbits),\ - .en_bit = (ebits),\ - .activate_bit = (abits),\ -} - static struct da9052_regulator_info da9052_regulator_info[] = { DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), - DA9052_BUCKPERI(BUCK4, 50, 1800, 3600, 5, 6, 0), + DA9052_DCDC(BUCK4, 50, 1800, 3600, 5, 6, 0), DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), - DA9052_LDO5_6(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), - DA9052_LDO5_6(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), + DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), + DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0), DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0), DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0), @@ -502,10 +360,10 @@ static struct da9052_regulator_info da9053_regulator_info[] = { DA9052_DCDC(BUCK1, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBCOREGO), DA9052_DCDC(BUCK2, 25, 500, 2075, 6, 6, DA9052_SUPPLY_VBPROGO), DA9052_DCDC(BUCK3, 25, 925, 2500, 6, 6, DA9052_SUPPLY_VBMEMGO), - DA9052_BUCKPERI(BUCK4, 25, 925, 2500, 6, 6, 0), + DA9052_DCDC(BUCK4, 25, 925, 2500, 6, 6, 0), DA9052_LDO(LDO1, 50, 600, 1800, 5, 6, 0), - DA9052_LDO5_6(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), - DA9052_LDO5_6(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), + DA9052_LDO(LDO2, 25, 600, 1800, 6, 6, DA9052_SUPPLY_VLDO2GO), + DA9052_LDO(LDO3, 25, 1725, 3300, 6, 6, DA9052_SUPPLY_VLDO3GO), DA9052_LDO(LDO4, 25, 1725, 3300, 6, 6, 0), DA9052_LDO(LDO5, 50, 1200, 3600, 6, 6, 0), DA9052_LDO(LDO6, 50, 1200, 3600, 6, 6, 0),