From: Bjorn Andersson Date: Thu, 18 Jun 2015 06:47:28 +0000 (-0700) Subject: pinctrl: qcom: spmi-mpp: Implement support for sink mode X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0e948042c4203b97e44370993ef042c945308282;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git pinctrl: qcom: spmi-mpp: Implement support for sink mode The MPP supports three modes; digital, analog and sink mode. This patch implements support for the latter. Signed-off-by: Bjorn Andersson Signed-off-by: Linus Walleij --- diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt index ed19991aad35..d29fb96a57d3 100644 --- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt +++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.txt @@ -134,6 +134,11 @@ to specify in a pin configuration subnode: and/or output-high, output-low MPP could operate as Bidirectional Logic, Analog Input, Analog Output. +- qcom,sink-mode: + Usage: optional + Value type: or + Definition: Selects sink mode of operation + - qcom,amux-route: Usage: optional Value type: diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c index 745c37dea7d0..9dde023640ba 100644 --- a/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c +++ b/drivers/pinctrl/qcom/pinctrl-spmi-mpp.c @@ -62,6 +62,7 @@ #define PMIC_MPP_REG_DIG_IN_CTL 0x43 #define PMIC_MPP_REG_EN_CTL 0x46 #define PMIC_MPP_REG_AIN_CTL 0x4a +#define PMIC_MPP_REG_SINK_CTL 0x4c /* PMIC_MPP_REG_MODE_CTL */ #define PMIC_MPP_REG_MODE_VALUE_MASK 0x1 @@ -98,6 +99,7 @@ /* Qualcomm specific pin configurations */ #define PMIC_MPP_CONF_AMUX_ROUTE (PIN_CONFIG_END + 1) #define PMIC_MPP_CONF_ANALOG_MODE (PIN_CONFIG_END + 2) +#define PMIC_MPP_CONF_SINK_MODE (PIN_CONFIG_END + 3) /** * struct pmic_mpp_pad - keep current MPP settings @@ -109,11 +111,13 @@ * @input_enabled: Set to true if MPP input buffer logic is enabled. * @analog_mode: Set to true when MPP should operate in Analog Input, Analog * Output or Bidirectional Analog mode. + * @sink_mode: Boolean indicating if ink mode is slected * @num_sources: Number of power-sources supported by this MPP. * @power_source: Current power-source used. * @amux_input: Set the source for analog input. * @pullup: Pullup resistor value. Valid in Bidirectional mode only. * @function: See pmic_mpp_functions[]. + * @drive_strength: Amount of current in sink mode */ struct pmic_mpp_pad { u16 base; @@ -123,11 +127,13 @@ struct pmic_mpp_pad { bool output_enabled; bool input_enabled; bool analog_mode; + bool sink_mode; unsigned int num_sources; unsigned int power_source; unsigned int amux_input; unsigned int pullup; unsigned int function; + unsigned int drive_strength; }; struct pmic_mpp_state { @@ -140,12 +146,14 @@ struct pmic_mpp_state { static const struct pinconf_generic_params pmic_mpp_bindings[] = { {"qcom,amux-route", PMIC_MPP_CONF_AMUX_ROUTE, 0}, {"qcom,analog-mode", PMIC_MPP_CONF_ANALOG_MODE, 0}, + {"qcom,sink-mode", PMIC_MPP_CONF_SINK_MODE, 0}, }; #ifdef CONFIG_DEBUG_FS static const struct pin_config_item pmic_conf_items[] = { PCONFDUMP(PMIC_MPP_CONF_AMUX_ROUTE, "analog mux", NULL, true), PCONFDUMP(PMIC_MPP_CONF_ANALOG_MODE, "analog output", NULL, false), + PCONFDUMP(PMIC_MPP_CONF_SINK_MODE, "sink mode", NULL, false), }; #endif @@ -243,33 +251,28 @@ static int pmic_mpp_get_function_groups(struct pinctrl_dev *pctldev, return 0; } -static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function, - unsigned pin) +static int pmic_mpp_write_mode_ctl(struct pmic_mpp_state *state, + struct pmic_mpp_pad *pad) { - struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev); - struct pmic_mpp_pad *pad; unsigned int val; - int ret; - - pad = pctldev->desc->pins[pin].drv_data; - - pad->function = function; - if (!pad->analog_mode) { - val = PMIC_MPP_MODE_DIGITAL_INPUT; + if (pad->analog_mode) { + val = PMIC_MPP_MODE_ANALOG_INPUT; if (pad->output_enabled) { if (pad->input_enabled) - val = PMIC_MPP_MODE_DIGITAL_BIDIR; + val = PMIC_MPP_MODE_ANALOG_BIDIR; else - val = PMIC_MPP_MODE_DIGITAL_OUTPUT; + val = PMIC_MPP_MODE_ANALOG_OUTPUT; } + } else if (pad->sink_mode) { + val = PMIC_MPP_MODE_CURRENT_SINK; } else { - val = PMIC_MPP_MODE_ANALOG_INPUT; + val = PMIC_MPP_MODE_DIGITAL_INPUT; if (pad->output_enabled) { if (pad->input_enabled) - val = PMIC_MPP_MODE_ANALOG_BIDIR; + val = PMIC_MPP_MODE_DIGITAL_BIDIR; else - val = PMIC_MPP_MODE_ANALOG_OUTPUT; + val = PMIC_MPP_MODE_DIGITAL_OUTPUT; } } @@ -277,9 +280,22 @@ static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function, val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT; val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK; - ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val); - if (ret < 0) - return ret; + return pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val); +} + +static int pmic_mpp_set_mux(struct pinctrl_dev *pctldev, unsigned function, + unsigned pin) +{ + struct pmic_mpp_state *state = pinctrl_dev_get_drvdata(pctldev); + struct pmic_mpp_pad *pad; + unsigned int val; + int ret; + + pad = pctldev->desc->pins[pin].drv_data; + + pad->function = function; + + ret = pmic_mpp_write_mode_ctl(state, pad); val = pad->is_enabled << PMIC_MPP_REG_MASTER_EN_SHIFT; @@ -339,9 +355,15 @@ static int pmic_mpp_config_get(struct pinctrl_dev *pctldev, case PMIC_MPP_CONF_AMUX_ROUTE: arg = pad->amux_input; break; + case PIN_CONFIG_DRIVE_STRENGTH: + arg = pad->drive_strength; + break; case PMIC_MPP_CONF_ANALOG_MODE: arg = pad->analog_mode; break; + case PMIC_MPP_CONF_SINK_MODE: + arg = pad->sink_mode; + break; default: return -EINVAL; } @@ -403,13 +425,19 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, pad->output_enabled = true; pad->out_value = arg; break; + case PIN_CONFIG_DRIVE_STRENGTH: + arg = pad->drive_strength; + break; case PMIC_MPP_CONF_AMUX_ROUTE: if (arg >= PMIC_MPP_AMUX_ROUTE_ABUS4) return -EINVAL; pad->amux_input = arg; break; case PMIC_MPP_CONF_ANALOG_MODE: - pad->analog_mode = true; + pad->analog_mode = !!arg; + break; + case PMIC_MPP_CONF_SINK_MODE: + pad->sink_mode = !!arg; break; default: return -EINVAL; @@ -434,29 +462,7 @@ static int pmic_mpp_config_set(struct pinctrl_dev *pctldev, unsigned int pin, if (ret < 0) return ret; - if (!pad->analog_mode) { - val = 0; /* just digital input */ - if (pad->output_enabled) { - if (pad->input_enabled) - val = 2; /* digital input and output */ - else - val = 1; /* just digital output */ - } - } else { - val = 4; /* just analog input */ - if (pad->output_enabled) { - if (pad->input_enabled) - val = 3; /* analog input and output */ - else - val = 5; /* just analog output */ - } - } - - val = val << PMIC_MPP_REG_MODE_DIR_SHIFT; - val |= pad->function << PMIC_MPP_REG_MODE_FUNCTION_SHIFT; - val |= pad->out_value & PMIC_MPP_REG_MODE_VALUE_MASK; - - ret = pmic_mpp_write(state, pad, PMIC_MPP_REG_MODE_CTL, val); + ret = pmic_mpp_write_mode_ctl(state, pad); if (ret < 0) return ret; @@ -476,6 +482,9 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev, "0.6kOhm", "10kOhm", "30kOhm", "Disabled" }; + static const char *const modes[] = { + "digital", "analog", "sink" + }; pad = pctldev->desc->pins[pin].drv_data; @@ -495,7 +504,7 @@ static void pmic_mpp_config_dbg_show(struct pinctrl_dev *pctldev, } seq_printf(s, " %-4s", pad->output_enabled ? "out" : "in"); - seq_printf(s, " %-4s", pad->analog_mode ? "ana" : "dig"); + seq_printf(s, " %-7s", modes[pad->analog_mode ? 1 : (pad->sink_mode ? 2 : 0)]); seq_printf(s, " %-7s", pmic_mpp_functions[pad->function]); seq_printf(s, " vin-%d", pad->power_source); seq_printf(s, " %-8s", biases[pad->pullup]); @@ -666,31 +675,43 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state, pad->input_enabled = true; pad->output_enabled = false; pad->analog_mode = false; + pad->sink_mode = false; break; case PMIC_MPP_MODE_DIGITAL_OUTPUT: pad->input_enabled = false; pad->output_enabled = true; pad->analog_mode = false; + pad->sink_mode = false; break; case PMIC_MPP_MODE_DIGITAL_BIDIR: pad->input_enabled = true; pad->output_enabled = true; pad->analog_mode = false; + pad->sink_mode = false; break; case PMIC_MPP_MODE_ANALOG_BIDIR: pad->input_enabled = true; pad->output_enabled = true; pad->analog_mode = true; + pad->sink_mode = false; break; case PMIC_MPP_MODE_ANALOG_INPUT: pad->input_enabled = true; pad->output_enabled = false; pad->analog_mode = true; + pad->sink_mode = false; break; case PMIC_MPP_MODE_ANALOG_OUTPUT: pad->input_enabled = false; pad->output_enabled = true; pad->analog_mode = true; + pad->sink_mode = false; + break; + case PMIC_MPP_MODE_CURRENT_SINK: + pad->input_enabled = false; + pad->output_enabled = true; + pad->analog_mode = false; + pad->sink_mode = true; break; default: dev_err(state->dev, "unknown MPP direction\n"); @@ -721,6 +742,12 @@ static int pmic_mpp_populate(struct pmic_mpp_state *state, pad->amux_input = val >> PMIC_MPP_REG_AIN_ROUTE_SHIFT; pad->amux_input &= PMIC_MPP_REG_AIN_ROUTE_MASK; + val = pmic_mpp_read(state, pad, PMIC_MPP_REG_SINK_CTL); + if (val < 0) + return val; + + pad->drive_strength = val; + val = pmic_mpp_read(state, pad, PMIC_MPP_REG_EN_CTL); if (val < 0) return val;