From: Bruno Randolf Date: Wed, 19 May 2010 01:31:05 +0000 (+0900) Subject: ath5k: Stop queues only for NF calibration X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0e8e02dddc528f1c650ba13bb3b61e818c39dd2f;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git ath5k: Stop queues only for NF calibration As far as we know, only NF calibration interferes with RX/TX so we can leave the queues enabled for the other calibrations. BTW: Stopping the queues is not enough for avoiding transmissions, since there might be packets in the queue + beacons are also sent regularly! But i leave it like this until we have a better solution (stopping TX DMA?). Signed-off-by: Bruno Randolf Acked-by: Nick Kossifidis Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c index 3d854f0853ac..78a0c420c494 100644 --- a/drivers/net/wireless/ath/ath5k/base.c +++ b/drivers/net/wireless/ath/ath5k/base.c @@ -2786,10 +2786,6 @@ ath5k_tasklet_calibrate(unsigned long data) /* Only full calibration for now */ ah->ah_cal_mask |= AR5K_CALIBRATION_FULL; - /* Stop queues so that calibration - * doesn't interfere with tx */ - ieee80211_stop_queues(sc->hw); - ATH5K_DBG(sc, ATH5K_DEBUG_CALIBRATE, "channel %u/%x\n", ieee80211_frequency_to_channel(sc->curchan->center_freq), sc->curchan->hw_value); @@ -2807,8 +2803,13 @@ ath5k_tasklet_calibrate(unsigned long data) ieee80211_frequency_to_channel( sc->curchan->center_freq)); + /* TODO: We don't need to run noise floor calibration as often + * as I/Q calibration.*/ + + /* Noise floor calibration interrupts rx/tx path while I/Q calibration + * doesn't. Stop queues so that calibration doesn't interfere with tx */ + ieee80211_stop_queues(sc->hw); ath5k_hw_update_noise_floor(ah); - /* Wake queues */ ieee80211_wake_queues(sc->hw); ah->ah_cal_mask &= ~AR5K_CALIBRATION_FULL;