From: Sean Nyekjaer Date: Tue, 22 May 2018 17:45:09 +0000 (+0200) Subject: ARM: dts: imx6q: Use correct SDMA script for SPI5 core X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0e76f4db40893ca36a184d8921777194704cf81a;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ARM: dts: imx6q: Use correct SDMA script for SPI5 core commit df07101e1c4a29e820df02f9989a066988b160e6 upstream. According to the reference manual the shp_2_mcu / mcu_2_shp scripts must be used for devices connected through the SPBA. This fixes an issue we saw with DMA transfers. Sometimes the SPI controller RX FIFO was not empty after a DMA transfer and the driver got stuck in the next PIO transfer when it read one word more than expected. commit dd4b487b32a35 ("ARM: dts: imx6: Use correct SDMA script for SPI cores") is fixing the same issue but only for SPI1 - 4. Fixes: 677940258dd8e ("ARM: dts: imx6q: enable dma for ecspi5") Signed-off-by: Sean Nyekjaer Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo Signed-off-by: Greg Kroah-Hartman --- diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index e9a5d0b8c7b0..908b269a016b 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -96,7 +96,7 @@ clocks = <&clks IMX6Q_CLK_ECSPI5>, <&clks IMX6Q_CLK_ECSPI5>; clock-names = "ipg", "per"; - dmas = <&sdma 11 7 1>, <&sdma 12 7 2>; + dmas = <&sdma 11 8 1>, <&sdma 12 8 2>; dma-names = "rx", "tx"; status = "disabled"; };