From: Mike Looijmans Date: Mon, 16 Jan 2017 14:49:38 +0000 (+0100) Subject: i2c: i2c-cadence: Initialize configuration before probing devices X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0e1929dedea36781e25902118c93edd8d8f09af1;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git i2c: i2c-cadence: Initialize configuration before probing devices The cadence I2C driver calls cdns_i2c_writereg(..) to setup a workaround in the controller, but did so after calling i2c_add_adapter() which starts probing devices on the bus. Change the order so that the configuration is completely finished before using the adapter. Signed-off-by: Mike Looijmans Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c index 686971263bef..45d6771fac8c 100644 --- a/drivers/i2c/busses/i2c-cadence.c +++ b/drivers/i2c/busses/i2c-cadence.c @@ -962,10 +962,6 @@ static int cdns_i2c_probe(struct platform_device *pdev) goto err_clk_dis; } - ret = i2c_add_adapter(&id->adap); - if (ret < 0) - goto err_clk_dis; - /* * Cadence I2C controller has a bug wherein it generates * invalid read transaction after HW timeout in master receiver mode. @@ -975,6 +971,10 @@ static int cdns_i2c_probe(struct platform_device *pdev) */ cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET); + ret = i2c_add_adapter(&id->adap); + if (ret < 0) + goto err_clk_dis; + dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n", id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);