From: Franky Lin Date: Wed, 1 Jun 2011 11:45:40 +0000 (+0200) Subject: staging: brmc80211: remove sdio.h from fullmac X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0df4604ed09873c46ddb3232a3efc5a2798854cb;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git staging: brmc80211: remove sdio.h from fullmac Use standard sdio.h from mmc core instead of private one Signed-off-by: Franky Lin Reviewed-by: Roland Vossen Reviewed-by: Arend van Spriel Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh.c index b8af4edea007..14c07e602ee3 100644 --- a/drivers/staging/brcm80211/brcmfmac/bcmsdh.c +++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh.c @@ -30,7 +30,6 @@ #include /* common SDIO/controller interface */ #include /* BRCM sdio device core */ -#include /* sdio spec */ #include "dngl_stats.h" #include "dhd.h" diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c index 067404bbb91d..6b2a4505d3c8 100644 --- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c +++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc.c @@ -15,11 +15,11 @@ */ #include #include +#include #include #include #include #include -#include /* SDIO Device and Protocol Specs */ #include /* SDIO Host Controller Specification */ #include /* bcmsdh to/from specific controller APIs */ #include /* ioctl/iovars */ @@ -75,16 +75,16 @@ static int sdioh_sdmmc_card_enablefuncs(sdioh_info_t *sd) sd_trace(("%s\n", __func__)); /* Get the Card's common CIS address */ - sd->com_cis_ptr = sdioh_sdmmc_get_cisaddr(sd, SDIOD_CCCR_CISPTR_0); + sd->com_cis_ptr = sdioh_sdmmc_get_cisaddr(sd, SDIO_CCCR_CIS); sd->func_cis_ptr[0] = sd->com_cis_ptr; sd_info(("%s: Card's Common CIS Ptr = 0x%x\n", __func__, sd->com_cis_ptr)); /* Get the Card's function CIS (for each function) */ - for (fbraddr = SDIOD_FBR_STARTADDR, func = 1; + for (fbraddr = SDIO_FBR_BASE(1), func = 1; func <= sd->num_funcs; func++, fbraddr += SDIOD_FBR_SIZE) { sd->func_cis_ptr[func] = - sdioh_sdmmc_get_cisaddr(sd, SDIOD_FBR_CISPTR_0 + fbraddr); + sdioh_sdmmc_get_cisaddr(sd, SDIO_FBR_CIS + fbraddr); sd_info(("%s: Function %d CIS Ptr = 0x%x\n", __func__, func, sd->func_cis_ptr[func])); } @@ -642,7 +642,7 @@ sdioh_request_byte(sdioh_info_t *sd, uint rw, uint func, uint regaddr, * Handle F2 enable * as a special case. */ - if (regaddr == SDIOD_CCCR_IOEN) { + if (regaddr == SDIO_CCCR_IOEx) { if (gInstance->func[2]) { sdio_claim_host(gInstance->func[2]); if (*byte & SDIO_FUNC_ENABLE_2) { @@ -667,7 +667,7 @@ sdioh_request_byte(sdioh_info_t *sd, uint rw, uint func, uint regaddr, } #if defined(MMC_SDIO_ABORT) /* to allow abort command through F1 */ - else if (regaddr == SDIOD_CCCR_IOABORT) { + else if (regaddr == SDIO_CCCR_ABORT) { sdio_claim_host(gInstance->func[func]); /* * this sdio_f0_writeb() can be replaced @@ -955,8 +955,8 @@ extern int sdioh_abort(sdioh_info_t *sd, uint func) sd_trace(("%s: Enter\n", __func__)); #if defined(MMC_SDIO_ABORT) - /* issue abort cmd52 command through F1 */ - sdioh_request_byte(sd, SD_IO_OP_WRITE, SDIO_FUNC_0, SDIOD_CCCR_IOABORT, + /* issue abort cmd52 command through F0 */ + sdioh_request_byte(sd, SDIOH_WRITE, SDIO_FUNC_0, SDIO_CCCR_ABORT, &t_func); #endif /* defined(MMC_SDIO_ABORT) */ diff --git a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c index 196b15e2557c..f495d4bdfa1c 100644 --- a/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c +++ b/drivers/staging/brcm80211/brcmfmac/bcmsdh_sdmmc_linux.c @@ -19,7 +19,6 @@ #include #include #include -#include /* SDIO Specs */ #include /* bcmsdh to/from specific controller APIs */ #include /* to get msglevel bit values */ diff --git a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c index e005ea6c222b..17999748c211 100644 --- a/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c +++ b/drivers/staging/brcm80211/brcmfmac/dhd_sdio.c @@ -20,6 +20,7 @@ #include #include #include +#include #include #include #include @@ -128,7 +129,6 @@ typedef struct { #endif /* DHD_DEBUG */ #include -#include #include #include @@ -3016,7 +3016,7 @@ void dhd_bus_stop(struct dhd_bus *bus, bool enforce_mutex) /* Turn off the bus (F2), free any pending packets */ DHD_INTR(("%s: disable SDIO interrupts\n", __func__)); bcmsdh_intr_disable(bus->sdh); - bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, NULL); /* Clear any pending interrupts now that F2 is disabled */ @@ -3091,7 +3091,7 @@ int dhd_bus_init(dhd_pub_t *dhdp, bool enforce_mutex) &bus->regs->tosbmailboxdata, retries); enable = (SDIO_FUNC_ENABLE_1 | SDIO_FUNC_ENABLE_2); - bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, enable, NULL); + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIO_CCCR_IOEx, enable, NULL); /* Give the dongle some time to do its thing and set IOR2 */ dhd_timeout_start(&tmo, DHD_WAIT_F2RDY * 1000); @@ -3099,7 +3099,7 @@ int dhd_bus_init(dhd_pub_t *dhdp, bool enforce_mutex) ready = 0; while (ready != enable && !dhd_timeout_expired(&tmo)) ready = - bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IORDY, + bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_0, SDIO_CCCR_IORx, NULL); DHD_INFO(("%s: enable 0x%02x, ready 0x%02x (waited %uus)\n", @@ -3136,7 +3136,7 @@ int dhd_bus_init(dhd_pub_t *dhdp, bool enforce_mutex) else { /* Disable F2 again */ enable = SDIO_FUNC_ENABLE_1; - bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, enable, + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIO_CCCR_IOEx, enable, NULL); } @@ -5018,7 +5018,7 @@ extern bool dhd_bus_watchdog(dhd_pub_t *dhdp) if (!bus->dpc_sched) { u8 devpend; devpend = bcmsdh_cfg_read(bus->sdh, SDIO_FUNC_0, - SDIOD_CCCR_INTPEND, + SDIO_CCCR_INTx, NULL); intstatus = devpend & (INTR_STATUS_FUNC1 | @@ -5150,35 +5150,6 @@ done: } #endif /* DHD_DEBUG */ -#ifdef DHD_DEBUG -static void dhd_dump_cis(uint fn, u8 *cis) -{ - uint byte, tag, tdata; - DHD_INFO(("Function %d CIS:\n", fn)); - - for (tdata = byte = 0; byte < SBSDIO_CIS_SIZE_LIMIT; byte++) { - if ((byte % 16) == 0) - DHD_INFO((" ")); - DHD_INFO(("%02x ", cis[byte])); - if ((byte % 16) == 15) - DHD_INFO(("\n")); - if (!tdata--) { - tag = cis[byte]; - if (tag == 0xff) - break; - else if (!tag) - tdata = 0; - else if ((byte + 1) < SBSDIO_CIS_SIZE_LIMIT) - tdata = cis[byte + 1] + 1; - else - DHD_INFO(("]")); - } - } - if ((byte % 16) != 15) - DHD_INFO(("\n")); -} -#endif /* DHD_DEBUG */ - static bool dhdsdio_chipmatch(u16 chipid) { if (chipid == BCM4325_CHIP_ID) @@ -5376,56 +5347,6 @@ dhdsdio_probe_attach(struct dhd_bus *bus, void *sdh, void *regsva, u16 devid) err, DHD_INIT_CLKCTL1, clkctl)); goto fail; } -#ifdef DHD_DEBUG - if (DHD_INFO_ON()) { - uint fn, numfn; - u8 *cis[SDIOD_MAX_IOFUNCS]; - int err = 0; - - numfn = bcmsdh_query_iofnum(sdh); - ASSERT(numfn <= SDIOD_MAX_IOFUNCS); - - /* Make sure ALP is available before trying to read CIS */ - SPINWAIT(((clkctl = bcmsdh_cfg_read(sdh, SDIO_FUNC_1, - SBSDIO_FUNC1_CHIPCLKCSR, - NULL)), - !SBSDIO_ALPAV(clkctl)), PMU_MAX_TRANSITION_DLY); - - /* Now request ALP be put on the bus */ - bcmsdh_cfg_write(sdh, SDIO_FUNC_1, SBSDIO_FUNC1_CHIPCLKCSR, - DHD_INIT_CLKCTL2, &err); - udelay(65); - - for (fn = 0; fn <= numfn; fn++) { - cis[fn] = kzalloc(SBSDIO_CIS_SIZE_LIMIT, GFP_ATOMIC); - if (!cis[fn]) { - DHD_INFO(("dhdsdio_probe: fn %d cis malloc " - "failed\n", fn)); - break; - } - - err = bcmsdh_cis_read(sdh, fn, cis[fn], - SBSDIO_CIS_SIZE_LIMIT); - if (err) { - DHD_INFO(("dhdsdio_probe: fn %d cis read " - "err %d\n", fn, err)); - kfree(cis[fn]); - break; - } - dhd_dump_cis(fn, cis[fn]); - } - - while (fn-- > 0) { - ASSERT(cis[fn]); - kfree(cis[fn]); - } - - if (err) { - DHD_ERROR(("dhdsdio_probe: error read/parsing CIS\n")); - goto fail; - } - } -#endif /* DHD_DEBUG */ if (dhdsdio_chip_attach(bus, regsva)) { DHD_ERROR(("%s: dhdsdio_chip_attach failed!\n", __func__)); @@ -5534,7 +5455,7 @@ static bool dhdsdio_probe_init(dhd_bus_t *bus, void *sdh) #endif /* SDTEST */ /* Disable F2 to clear any intermediate frame state on the dongle */ - bcmsdh_cfg_write(sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, SDIO_FUNC_ENABLE_1, + bcmsdh_cfg_write(sdh, SDIO_FUNC_0, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, NULL); bus->dhd->busstate = DHD_BUS_DOWN; @@ -6262,7 +6183,7 @@ dhdsdio_chip_attach(struct dhd_bus *bus, void *regs) CORE_CC_REG(ci->cccorebase, gpiopulldown), 4, 0); /* Disable F2 to clear any intermediate frame state on the dongle */ - bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIOD_CCCR_IOEN, + bcmsdh_cfg_write(bus->sdh, SDIO_FUNC_0, SDIO_CCCR_IOEx, SDIO_FUNC_ENABLE_1, NULL); /* WAR: cmd52 backplane read so core HW will drop ALPReq */ diff --git a/drivers/staging/brcm80211/brcmfmac/sdio.h b/drivers/staging/brcm80211/brcmfmac/sdio.h deleted file mode 100644 index 670e379b9aac..000000000000 --- a/drivers/staging/brcm80211/brcmfmac/sdio.h +++ /dev/null @@ -1,552 +0,0 @@ -/* - * Copyright (c) 2010 Broadcom Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY - * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION - * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN - * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _SDIO_H -#define _SDIO_H - -#ifdef BCMSDIO - -/* CCCR structure for function 0 */ -typedef volatile struct { - u8 cccr_sdio_rev; /* RO, cccr and sdio revision */ - u8 sd_rev; /* RO, sd spec revision */ - u8 io_en; /* I/O enable */ - u8 io_rdy; /* I/O ready reg */ - u8 intr_ctl; /* Master and per function interrupt enable control */ - u8 intr_status; /* RO, interrupt pending status */ - u8 io_abort; /* read/write abort or reset all functions */ - u8 bus_inter; /* bus interface control */ - u8 capability; /* RO, card capability */ - - u8 cis_base_low; /* 0x9 RO, common CIS base address, LSB */ - u8 cis_base_mid; - u8 cis_base_high; /* 0xB RO, common CIS base address, MSB */ - - /* suspend/resume registers */ - u8 bus_suspend; /* 0xC */ - u8 func_select; /* 0xD */ - u8 exec_flag; /* 0xE */ - u8 ready_flag; /* 0xF */ - - u8 fn0_blk_size[2]; /* 0x10(LSB), 0x11(MSB) */ - - u8 power_control; /* 0x12 (SDIO version 1.10) */ - - u8 speed_control; /* 0x13 */ -} sdio_regs_t; - -/* SDIO Device CCCR offsets */ -#define SDIOD_CCCR_REV 0x00 -#define SDIOD_CCCR_SDREV 0x01 -#define SDIOD_CCCR_IOEN 0x02 -#define SDIOD_CCCR_IORDY 0x03 -#define SDIOD_CCCR_INTEN 0x04 -#define SDIOD_CCCR_INTPEND 0x05 -#define SDIOD_CCCR_IOABORT 0x06 -#define SDIOD_CCCR_BICTRL 0x07 -#define SDIOD_CCCR_CAPABLITIES 0x08 -#define SDIOD_CCCR_CISPTR_0 0x09 -#define SDIOD_CCCR_CISPTR_1 0x0A -#define SDIOD_CCCR_CISPTR_2 0x0B -#define SDIOD_CCCR_BUSSUSP 0x0C -#define SDIOD_CCCR_FUNCSEL 0x0D -#define SDIOD_CCCR_EXECFLAGS 0x0E -#define SDIOD_CCCR_RDYFLAGS 0x0F -#define SDIOD_CCCR_BLKSIZE_0 0x10 -#define SDIOD_CCCR_BLKSIZE_1 0x11 -#define SDIOD_CCCR_POWER_CONTROL 0x12 -#define SDIOD_CCCR_SPEED_CONTROL 0x13 - -/* Broadcom extensions (corerev >= 1) */ -#define SDIOD_CCCR_BRCM_SEPINT 0xf2 - -/* cccr_sdio_rev */ -#define SDIO_REV_SDIOID_MASK 0xf0 /* SDIO spec revision number */ -#define SDIO_REV_CCCRID_MASK 0x0f /* CCCR format version number */ - -/* sd_rev */ -#define SD_REV_PHY_MASK 0x0f /* SD format version number */ - -/* io_en */ -#define SDIO_FUNC_ENABLE_1 0x02 /* function 1 I/O enable */ -#define SDIO_FUNC_ENABLE_2 0x04 /* function 2 I/O enable */ - -/* io_rdys */ -#define SDIO_FUNC_READY_1 0x02 /* function 1 I/O ready */ -#define SDIO_FUNC_READY_2 0x04 /* function 2 I/O ready */ - -/* intr_ctl */ -#define INTR_CTL_MASTER_EN 0x1 /* interrupt enable master */ -#define INTR_CTL_FUNC1_EN 0x2 /* interrupt enable for function 1 */ -#define INTR_CTL_FUNC2_EN 0x4 /* interrupt enable for function 2 */ - -/* intr_status */ -#define INTR_STATUS_FUNC1 0x2 /* interrupt pending for function 1 */ -#define INTR_STATUS_FUNC2 0x4 /* interrupt pending for function 2 */ - -/* io_abort */ -#define IO_ABORT_RESET_ALL 0x08 /* I/O card reset */ -#define IO_ABORT_FUNC_MASK 0x07 /* abort selction: function x */ - -/* bus_inter */ -#define BUS_CARD_DETECT_DIS 0x80 /* Card Detect disable */ -#define BUS_SPI_CONT_INTR_CAP 0x40 /* support continuous SPI interrupt */ -#define BUS_SPI_CONT_INTR_EN 0x20 /* continuous SPI interrupt enable */ -#define BUS_SD_DATA_WIDTH_MASK 0x03 /* bus width mask */ -#define BUS_SD_DATA_WIDTH_4BIT 0x02 /* bus width 4-bit mode */ -#define BUS_SD_DATA_WIDTH_1BIT 0x00 /* bus width 1-bit mode */ - -/* capability */ -#define SDIO_CAP_4BLS 0x80 /* 4-bit support for low speed card */ -#define SDIO_CAP_LSC 0x40 /* low speed card */ -#define SDIO_CAP_E4MI 0x20 /* enable interrupt between block of data in 4-bit mode */ -#define SDIO_CAP_S4MI 0x10 /* support interrupt between block of data in 4-bit mode */ -#define SDIO_CAP_SBS 0x08 /* support suspend/resume */ -#define SDIO_CAP_SRW 0x04 /* support read wait */ -#define SDIO_CAP_SMB 0x02 /* support multi-block transfer */ -#define SDIO_CAP_SDC 0x01 /* Support Direct commands during multi-byte transfer */ - -/* power_control */ -#define SDIO_POWER_SMPC 0x01 /* supports master power control (RO) */ -#define SDIO_POWER_EMPC 0x02 /* enable master power control (allow > 200mA) (RW) */ - -/* speed_control (control device entry into high-speed clocking mode) */ -#define SDIO_SPEED_SHS 0x01 /* supports high-speed [clocking] mode (RO) */ -#define SDIO_SPEED_EHS 0x02 /* enable high-speed [clocking] mode (RW) */ - -/* brcm sepint */ -#define SDIO_SEPINT_MASK 0x01 /* route sdpcmdev intr onto separate pad (chip-specific) */ -#define SDIO_SEPINT_OE 0x02 /* 1 asserts output enable for above pad */ -#define SDIO_SEPINT_ACT_HI 0x04 /* use active high interrupt level instead of active low */ - -/* FBR structure for function 1-7, FBR addresses and register offsets */ -typedef volatile struct { - u8 devctr; /* device interface, CSA control */ - u8 ext_dev; /* extended standard I/O device type code */ - u8 pwr_sel; /* power selection support */ - u8 PAD[6]; /* reserved */ - - u8 cis_low; /* CIS LSB */ - u8 cis_mid; - u8 cis_high; /* CIS MSB */ - u8 csa_low; /* code storage area, LSB */ - u8 csa_mid; - u8 csa_high; /* code storage area, MSB */ - u8 csa_dat_win; /* data access window to function */ - - u8 fnx_blk_size[2]; /* block size, little endian */ -} sdio_fbr_t; - -/* Maximum number of I/O funcs */ -#define SDIOD_MAX_IOFUNCS 7 - -/* SDIO Device FBR Start Address */ -#define SDIOD_FBR_STARTADDR 0x100 - -/* SDIO Device FBR Size */ -#define SDIOD_FBR_SIZE 0x100 - -/* Macro to calculate FBR register base */ -#define SDIOD_FBR_BASE(n) ((n) * 0x100) - -/* Function register offsets */ -#define SDIOD_FBR_DEVCTR 0x00 /* basic info for function */ -#define SDIOD_FBR_EXT_DEV 0x01 /* extended I/O device code */ -#define SDIOD_FBR_PWR_SEL 0x02 /* power selection bits */ - -/* SDIO Function CIS ptr offset */ -#define SDIOD_FBR_CISPTR_0 0x09 -#define SDIOD_FBR_CISPTR_1 0x0A -#define SDIOD_FBR_CISPTR_2 0x0B - -/* Code Storage Area pointer */ -#define SDIOD_FBR_CSA_ADDR_0 0x0C -#define SDIOD_FBR_CSA_ADDR_1 0x0D -#define SDIOD_FBR_CSA_ADDR_2 0x0E -#define SDIOD_FBR_CSA_DATA 0x0F - -/* SDIO Function I/O Block Size */ -#define SDIOD_FBR_BLKSIZE_0 0x10 -#define SDIOD_FBR_BLKSIZE_1 0x11 - -/* devctr */ -#define SDIOD_FBR_DEVCTR_DIC 0x0f /* device interface code */ -#define SDIOD_FBR_DECVTR_CSA 0x40 /* CSA support flag */ -#define SDIOD_FBR_DEVCTR_CSA_EN 0x80 /* CSA enabled */ -/* interface codes */ -#define SDIOD_DIC_NONE 0 /* SDIO standard interface is not supported */ -#define SDIOD_DIC_UART 1 -#define SDIOD_DIC_BLUETOOTH_A 2 -#define SDIOD_DIC_BLUETOOTH_B 3 -#define SDIOD_DIC_GPS 4 -#define SDIOD_DIC_CAMERA 5 -#define SDIOD_DIC_PHS 6 -#define SDIOD_DIC_WLAN 7 -#define SDIOD_DIC_EXT 0xf /* extended device interface, read ext_dev register */ - -/* pwr_sel */ -#define SDIOD_PWR_SEL_SPS 0x01 /* supports power selection */ -#define SDIOD_PWR_SEL_EPS 0x02 /* enable power selection (low-current mode) */ - -/* misc defines */ -#define SDIO_FUNC_0 0 -#define SDIO_FUNC_1 1 -#define SDIO_FUNC_2 2 -#define SDIO_FUNC_3 3 -#define SDIO_FUNC_4 4 -#define SDIO_FUNC_5 5 -#define SDIO_FUNC_6 6 -#define SDIO_FUNC_7 7 - -#define SD_CARD_TYPE_UNKNOWN 0 /* bad type or unrecognized */ -#define SD_CARD_TYPE_IO 1 /* IO only card */ -#define SD_CARD_TYPE_MEMORY 2 /* memory only card */ -#define SD_CARD_TYPE_COMBO 3 /* IO and memory combo card */ - -#define SDIO_MAX_BLOCK_SIZE 2048 /* maximum block size for block mode operation */ -#define SDIO_MIN_BLOCK_SIZE 1 /* minimum block size for block mode operation */ - -/* Card registers: status bit position */ -#define CARDREG_STATUS_BIT_OUTOFRANGE 31 -#define CARDREG_STATUS_BIT_COMCRCERROR 23 -#define CARDREG_STATUS_BIT_ILLEGALCOMMAND 22 -#define CARDREG_STATUS_BIT_ERROR 19 -#define CARDREG_STATUS_BIT_IOCURRENTSTATE3 12 -#define CARDREG_STATUS_BIT_IOCURRENTSTATE2 11 -#define CARDREG_STATUS_BIT_IOCURRENTSTATE1 10 -#define CARDREG_STATUS_BIT_IOCURRENTSTATE0 9 -#define CARDREG_STATUS_BIT_FUN_NUM_ERROR 4 - -#define SD_CMD_GO_IDLE_STATE 0 /* mandatory for SDIO */ -#define SD_CMD_SEND_OPCOND 1 -#define SD_CMD_MMC_SET_RCA 3 -#define SD_CMD_IO_SEND_OP_COND 5 /* mandatory for SDIO */ -#define SD_CMD_SELECT_DESELECT_CARD 7 -#define SD_CMD_SEND_CSD 9 -#define SD_CMD_SEND_CID 10 -#define SD_CMD_STOP_TRANSMISSION 12 -#define SD_CMD_SEND_STATUS 13 -#define SD_CMD_GO_INACTIVE_STATE 15 -#define SD_CMD_SET_BLOCKLEN 16 -#define SD_CMD_READ_SINGLE_BLOCK 17 -#define SD_CMD_READ_MULTIPLE_BLOCK 18 -#define SD_CMD_WRITE_BLOCK 24 -#define SD_CMD_WRITE_MULTIPLE_BLOCK 25 -#define SD_CMD_PROGRAM_CSD 27 -#define SD_CMD_SET_WRITE_PROT 28 -#define SD_CMD_CLR_WRITE_PROT 29 -#define SD_CMD_SEND_WRITE_PROT 30 -#define SD_CMD_ERASE_WR_BLK_START 32 -#define SD_CMD_ERASE_WR_BLK_END 33 -#define SD_CMD_ERASE 38 -#define SD_CMD_LOCK_UNLOCK 42 -#define SD_CMD_IO_RW_DIRECT 52 /* mandatory for SDIO */ -#define SD_CMD_IO_RW_EXTENDED 53 /* mandatory for SDIO */ -#define SD_CMD_APP_CMD 55 -#define SD_CMD_GEN_CMD 56 -#define SD_CMD_READ_OCR 58 -#define SD_CMD_CRC_ON_OFF 59 /* mandatory for SDIO */ -#define SD_ACMD_SD_STATUS 13 -#define SD_ACMD_SEND_NUM_WR_BLOCKS 22 -#define SD_ACMD_SET_WR_BLOCK_ERASE_CNT 23 -#define SD_ACMD_SD_SEND_OP_COND 41 -#define SD_ACMD_SET_CLR_CARD_DETECT 42 -#define SD_ACMD_SEND_SCR 51 - -/* argument for SD_CMD_IO_RW_DIRECT and SD_CMD_IO_RW_EXTENDED */ -#define SD_IO_OP_READ 0 /* Read_Write: Read */ -#define SD_IO_OP_WRITE 1 /* Read_Write: Write */ -#define SD_IO_RW_NORMAL 0 /* no RAW */ -#define SD_IO_RW_RAW 1 /* RAW */ -#define SD_IO_BYTE_MODE 0 /* Byte Mode */ -#define SD_IO_BLOCK_MODE 1 /* BlockMode */ -#define SD_IO_FIXED_ADDRESS 0 /* fix Address */ -#define SD_IO_INCREMENT_ADDRESS 1 /* IncrementAddress */ - -/* build SD_CMD_IO_RW_DIRECT Argument */ -#define SDIO_IO_RW_DIRECT_ARG(rw, raw, func, addr, data) \ - ((((rw) & 1) << 31) | (((func) & 0x7) << 28) | (((raw) & 1) << 27) | \ - (((addr) & 0x1FFFF) << 9) | ((data) & 0xFF)) - -/* build SD_CMD_IO_RW_EXTENDED Argument */ -#define SDIO_IO_RW_EXTENDED_ARG(rw, blk, func, addr, inc_addr, count) \ - ((((rw) & 1) << 31) | (((func) & 0x7) << 28) | (((blk) & 1) << 27) | \ - (((inc_addr) & 1) << 26) | (((addr) & 0x1FFFF) << 9) | ((count) & 0x1FF)) - -/* SDIO response parameters */ -#define SD_RSP_NO_NONE 0 -#define SD_RSP_NO_1 1 -#define SD_RSP_NO_2 2 -#define SD_RSP_NO_3 3 -#define SD_RSP_NO_4 4 -#define SD_RSP_NO_5 5 -#define SD_RSP_NO_6 6 - - /* Modified R6 response (to CMD3) */ -#define SD_RSP_MR6_COM_CRC_ERROR 0x8000 -#define SD_RSP_MR6_ILLEGAL_COMMAND 0x4000 -#define SD_RSP_MR6_ERROR 0x2000 - - /* Modified R1 in R4 Response (to CMD5) */ -#define SD_RSP_MR1_SBIT 0x80 -#define SD_RSP_MR1_PARAMETER_ERROR 0x40 -#define SD_RSP_MR1_RFU5 0x20 -#define SD_RSP_MR1_FUNC_NUM_ERROR 0x10 -#define SD_RSP_MR1_COM_CRC_ERROR 0x08 -#define SD_RSP_MR1_ILLEGAL_COMMAND 0x04 -#define SD_RSP_MR1_RFU1 0x02 -#define SD_RSP_MR1_IDLE_STATE 0x01 - - /* R5 response (to CMD52 and CMD53) */ -#define SD_RSP_R5_COM_CRC_ERROR 0x80 -#define SD_RSP_R5_ILLEGAL_COMMAND 0x40 -#define SD_RSP_R5_IO_CURRENTSTATE1 0x20 -#define SD_RSP_R5_IO_CURRENTSTATE0 0x10 -#define SD_RSP_R5_ERROR 0x08 -#define SD_RSP_R5_RFU 0x04 -#define SD_RSP_R5_FUNC_NUM_ERROR 0x02 -#define SD_RSP_R5_OUT_OF_RANGE 0x01 - -#define SD_RSP_R5_ERRBITS 0xCB - -/* ------------------------------------------------ - * SDIO Commands and responses - * - * I/O only commands are: - * CMD0, CMD3, CMD5, CMD7, CMD15, CMD52, CMD53 - * ------------------------------------------------ - */ - -/* SDIO Commands */ -#define SDIOH_CMD_0 0 -#define SDIOH_CMD_3 3 -#define SDIOH_CMD_5 5 -#define SDIOH_CMD_7 7 -#define SDIOH_CMD_15 15 -#define SDIOH_CMD_52 52 -#define SDIOH_CMD_53 53 -#define SDIOH_CMD_59 59 - -/* SDIO Command Responses */ -#define SDIOH_RSP_NONE 0 -#define SDIOH_RSP_R1 1 -#define SDIOH_RSP_R2 2 -#define SDIOH_RSP_R3 3 -#define SDIOH_RSP_R4 4 -#define SDIOH_RSP_R5 5 -#define SDIOH_RSP_R6 6 - -/* - * SDIO Response Error flags - */ -#define SDIOH_RSP5_ERROR_FLAGS 0xCB - -/* ------------------------------------------------ - * SDIO Command structures. I/O only commands are: - * - * CMD0, CMD3, CMD5, CMD7, CMD15, CMD52, CMD53 - * ------------------------------------------------ - */ - -#define CMD5_OCR_M BITFIELD_MASK(24) -#define CMD5_OCR_S 0 - -#define CMD7_RCA_M BITFIELD_MASK(16) -#define CMD7_RCA_S 16 - -#define CMD_15_RCA_M BITFIELD_MASK(16) -#define CMD_15_RCA_S 16 - -#define CMD52_DATA_M BITFIELD_MASK(8) /* Bits [7:0] - Write Data/Stuff bits of CMD52 - */ -#define CMD52_DATA_S 0 -#define CMD52_REG_ADDR_M BITFIELD_MASK(17) /* Bits [25:9] - register address */ -#define CMD52_REG_ADDR_S 9 -#define CMD52_RAW_M BITFIELD_MASK(1) /* Bit 27 - Read after Write flag */ -#define CMD52_RAW_S 27 -#define CMD52_FUNCTION_M BITFIELD_MASK(3) /* Bits [30:28] - Function number */ -#define CMD52_FUNCTION_S 28 -#define CMD52_RW_FLAG_M BITFIELD_MASK(1) /* Bit 31 - R/W flag */ -#define CMD52_RW_FLAG_S 31 - -#define CMD53_BYTE_BLK_CNT_M BITFIELD_MASK(9) /* Bits [8:0] - Byte/Block Count of CMD53 */ -#define CMD53_BYTE_BLK_CNT_S 0 -#define CMD53_REG_ADDR_M BITFIELD_MASK(17) /* Bits [25:9] - register address */ -#define CMD53_REG_ADDR_S 9 -#define CMD53_OP_CODE_M BITFIELD_MASK(1) /* Bit 26 - R/W Operation Code */ -#define CMD53_OP_CODE_S 26 -#define CMD53_BLK_MODE_M BITFIELD_MASK(1) /* Bit 27 - Block Mode */ -#define CMD53_BLK_MODE_S 27 -#define CMD53_FUNCTION_M BITFIELD_MASK(3) /* Bits [30:28] - Function number */ -#define CMD53_FUNCTION_S 28 -#define CMD53_RW_FLAG_M BITFIELD_MASK(1) /* Bit 31 - R/W flag */ -#define CMD53_RW_FLAG_S 31 - -/* ------------------------------------------------------ - * SDIO Command Response structures for SD1 and SD4 modes - * ----------------------------------------------------- - */ -#define RSP4_IO_OCR_M BITFIELD_MASK(24) /* Bits [23:0] - Card's OCR Bits [23:0] */ -#define RSP4_IO_OCR_S 0 -#define RSP4_STUFF_M BITFIELD_MASK(3) /* Bits [26:24] - Stuff bits */ -#define RSP4_STUFF_S 24 -#define RSP4_MEM_PRESENT_M BITFIELD_MASK(1) /* Bit 27 - Memory present */ -#define RSP4_MEM_PRESENT_S 27 -#define RSP4_NUM_FUNCS_M BITFIELD_MASK(3) /* Bits [30:28] - Number of I/O funcs */ -#define RSP4_NUM_FUNCS_S 28 -#define RSP4_CARD_READY_M BITFIELD_MASK(1) /* Bit 31 - SDIO card ready */ -#define RSP4_CARD_READY_S 31 - -#define RSP6_STATUS_M BITFIELD_MASK(16) /* Bits [15:0] - Card status bits [19,22,23,12:0] - */ -#define RSP6_STATUS_S 0 -#define RSP6_IO_RCA_M BITFIELD_MASK(16) /* Bits [31:16] - RCA bits[31-16] */ -#define RSP6_IO_RCA_S 16 - -#define RSP1_AKE_SEQ_ERROR_M BITFIELD_MASK(1) /* Bit 3 - Authentication seq error */ -#define RSP1_AKE_SEQ_ERROR_S 3 -#define RSP1_APP_CMD_M BITFIELD_MASK(1) /* Bit 5 - Card expects ACMD */ -#define RSP1_APP_CMD_S 5 -#define RSP1_READY_FOR_DATA_M BITFIELD_MASK(1) /* Bit 8 - Ready for data (buff empty) */ -#define RSP1_READY_FOR_DATA_S 8 -#define RSP1_CURR_STATE_M BITFIELD_MASK(4) /* Bits [12:9] - State of card - * when Cmd was received - */ -#define RSP1_CURR_STATE_S 9 -#define RSP1_EARSE_RESET_M BITFIELD_MASK(1) /* Bit 13 - Erase seq cleared */ -#define RSP1_EARSE_RESET_S 13 -#define RSP1_CARD_ECC_DISABLE_M BITFIELD_MASK(1) /* Bit 14 - Card ECC disabled */ -#define RSP1_CARD_ECC_DISABLE_S 14 -#define RSP1_WP_ERASE_SKIP_M BITFIELD_MASK(1) /* Bit 15 - Partial blocks erased due to W/P */ -#define RSP1_WP_ERASE_SKIP_S 15 -#define RSP1_CID_CSD_OVERW_M BITFIELD_MASK(1) /* Bit 16 - Illegal write to CID or R/O bits - * of CSD - */ -#define RSP1_CID_CSD_OVERW_S 16 -#define RSP1_ERROR_M BITFIELD_MASK(1) /* Bit 19 - General/Unknown error */ -#define RSP1_ERROR_S 19 -#define RSP1_CC_ERROR_M BITFIELD_MASK(1) /* Bit 20 - Internal Card Control error */ -#define RSP1_CC_ERROR_S 20 -#define RSP1_CARD_ECC_FAILED_M BITFIELD_MASK(1) /* Bit 21 - Card internal ECC failed - * to correct data - */ -#define RSP1_CARD_ECC_FAILED_S 21 -#define RSP1_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 22 - Cmd not legal for the card state */ -#define RSP1_ILLEGAL_CMD_S 22 -#define RSP1_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 23 - CRC check of previous command failed - */ -#define RSP1_COM_CRC_ERROR_S 23 -#define RSP1_LOCK_UNLOCK_FAIL_M BITFIELD_MASK(1) /* Bit 24 - Card lock-unlock Cmd Seq error */ -#define RSP1_LOCK_UNLOCK_FAIL_S 24 -#define RSP1_CARD_LOCKED_M BITFIELD_MASK(1) /* Bit 25 - Card locked by the host */ -#define RSP1_CARD_LOCKED_S 25 -#define RSP1_WP_VIOLATION_M BITFIELD_MASK(1) /* Bit 26 - Attempt to program - * write-protected blocks - */ -#define RSP1_WP_VIOLATION_S 26 -#define RSP1_ERASE_PARAM_M BITFIELD_MASK(1) /* Bit 27 - Invalid erase blocks */ -#define RSP1_ERASE_PARAM_S 27 -#define RSP1_ERASE_SEQ_ERR_M BITFIELD_MASK(1) /* Bit 28 - Erase Cmd seq error */ -#define RSP1_ERASE_SEQ_ERR_S 28 -#define RSP1_BLK_LEN_ERR_M BITFIELD_MASK(1) /* Bit 29 - Block length error */ -#define RSP1_BLK_LEN_ERR_S 29 -#define RSP1_ADDR_ERR_M BITFIELD_MASK(1) /* Bit 30 - Misaligned address */ -#define RSP1_ADDR_ERR_S 30 -#define RSP1_OUT_OF_RANGE_M BITFIELD_MASK(1) /* Bit 31 - Cmd arg was out of range */ -#define RSP1_OUT_OF_RANGE_S 31 - -#define RSP5_DATA_M BITFIELD_MASK(8) /* Bits [0:7] - data */ -#define RSP5_DATA_S 0 -#define RSP5_FLAGS_M BITFIELD_MASK(8) /* Bit [15:8] - Rsp flags */ -#define RSP5_FLAGS_S 8 -#define RSP5_STUFF_M BITFIELD_MASK(16) /* Bits [31:16] - Stuff bits */ -#define RSP5_STUFF_S 16 - -/* ---------------------------------------------- - * SDIO Command Response structures for SPI mode - * ---------------------------------------------- - */ -#define SPIRSP4_IO_OCR_M BITFIELD_MASK(16) /* Bits [15:0] - Card's OCR Bits [23:8] */ -#define SPIRSP4_IO_OCR_S 0 -#define SPIRSP4_STUFF_M BITFIELD_MASK(3) /* Bits [18:16] - Stuff bits */ -#define SPIRSP4_STUFF_S 16 -#define SPIRSP4_MEM_PRESENT_M BITFIELD_MASK(1) /* Bit 19 - Memory present */ -#define SPIRSP4_MEM_PRESENT_S 19 -#define SPIRSP4_NUM_FUNCS_M BITFIELD_MASK(3) /* Bits [22:20] - Number of I/O funcs */ -#define SPIRSP4_NUM_FUNCS_S 20 -#define SPIRSP4_CARD_READY_M BITFIELD_MASK(1) /* Bit 23 - SDIO card ready */ -#define SPIRSP4_CARD_READY_S 23 -#define SPIRSP4_IDLE_STATE_M BITFIELD_MASK(1) /* Bit 24 - idle state */ -#define SPIRSP4_IDLE_STATE_S 24 -#define SPIRSP4_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 26 - Illegal Cmd error */ -#define SPIRSP4_ILLEGAL_CMD_S 26 -#define SPIRSP4_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 27 - COM CRC error */ -#define SPIRSP4_COM_CRC_ERROR_S 27 -#define SPIRSP4_FUNC_NUM_ERROR_M BITFIELD_MASK(1) /* Bit 28 - Function number error - */ -#define SPIRSP4_FUNC_NUM_ERROR_S 28 -#define SPIRSP4_PARAM_ERROR_M BITFIELD_MASK(1) /* Bit 30 - Parameter Error Bit */ -#define SPIRSP4_PARAM_ERROR_S 30 -#define SPIRSP4_START_BIT_M BITFIELD_MASK(1) /* Bit 31 - Start Bit */ -#define SPIRSP4_START_BIT_S 31 - -#define SPIRSP5_DATA_M BITFIELD_MASK(8) /* Bits [23:16] - R/W Data */ -#define SPIRSP5_DATA_S 16 -#define SPIRSP5_IDLE_STATE_M BITFIELD_MASK(1) /* Bit 24 - Idle state */ -#define SPIRSP5_IDLE_STATE_S 24 -#define SPIRSP5_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 26 - Illegal Cmd error */ -#define SPIRSP5_ILLEGAL_CMD_S 26 -#define SPIRSP5_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 27 - COM CRC error */ -#define SPIRSP5_COM_CRC_ERROR_S 27 -#define SPIRSP5_FUNC_NUM_ERROR_M BITFIELD_MASK(1) /* Bit 28 - Function number error - */ -#define SPIRSP5_FUNC_NUM_ERROR_S 28 -#define SPIRSP5_PARAM_ERROR_M BITFIELD_MASK(1) /* Bit 30 - Parameter Error Bit */ -#define SPIRSP5_PARAM_ERROR_S 30 -#define SPIRSP5_START_BIT_M BITFIELD_MASK(1) /* Bit 31 - Start Bit */ -#define SPIRSP5_START_BIT_S 31 - -/* RSP6 card status format; Pg 68 Physical Layer spec v 1.10 */ -#define RSP6STAT_AKE_SEQ_ERROR_M BITFIELD_MASK(1) /* Bit 3 - Authentication seq error - */ -#define RSP6STAT_AKE_SEQ_ERROR_S 3 -#define RSP6STAT_APP_CMD_M BITFIELD_MASK(1) /* Bit 5 - Card expects ACMD */ -#define RSP6STAT_APP_CMD_S 5 -#define RSP6STAT_READY_FOR_DATA_M BITFIELD_MASK(1) /* Bit 8 - Ready for data - * (buff empty) - */ -#define RSP6STAT_READY_FOR_DATA_S 8 -#define RSP6STAT_CURR_STATE_M BITFIELD_MASK(4) /* Bits [12:9] - Card state at - * Cmd reception - */ -#define RSP6STAT_CURR_STATE_S 9 -#define RSP6STAT_ERROR_M BITFIELD_MASK(1) /* Bit 13 - General/Unknown error Bit 19 - */ -#define RSP6STAT_ERROR_S 13 -#define RSP6STAT_ILLEGAL_CMD_M BITFIELD_MASK(1) /* Bit 14 - Illegal cmd for - * card state Bit 22 - */ -#define RSP6STAT_ILLEGAL_CMD_S 14 -#define RSP6STAT_COM_CRC_ERROR_M BITFIELD_MASK(1) /* Bit 15 - CRC previous command - * failed Bit 23 - */ -#define RSP6STAT_COM_CRC_ERROR_S 15 - -#define SDIOH_XFER_TYPE_READ SD_IO_OP_READ -#define SDIOH_XFER_TYPE_WRITE SD_IO_OP_WRITE - -#endif /* def BCMSDIO */ -#endif /* _SDIO_H */ diff --git a/drivers/staging/brcm80211/include/bcmsdh.h b/drivers/staging/brcm80211/include/bcmsdh.h index 3b57dc13b1de..ba3fd6233e49 100644 --- a/drivers/staging/brcm80211/include/bcmsdh.h +++ b/drivers/staging/brcm80211/include/bcmsdh.h @@ -38,6 +38,27 @@ extern const uint bcmsdh_msglevel; #define BCMSDH_INFO(x) #endif /* BCMDBG */ +#define SDIO_FUNC_0 0 +#define SDIO_FUNC_1 1 +#define SDIO_FUNC_2 2 + +#define SDIOD_FBR_SIZE 0x100 + +/* io_en */ +#define SDIO_FUNC_ENABLE_1 0x02 +#define SDIO_FUNC_ENABLE_2 0x04 + +/* io_rdys */ +#define SDIO_FUNC_READY_1 0x02 +#define SDIO_FUNC_READY_2 0x04 + +/* intr_status */ +#define INTR_STATUS_FUNC1 0x2 +#define INTR_STATUS_FUNC2 0x4 + +/* Maximum number of I/O funcs */ +#define SDIOD_MAX_IOFUNCS 7 + /* forward declarations */ typedef struct bcmsdh_info bcmsdh_info_t; typedef void (*bcmsdh_cb_fn_t) (void *);