From: Ulrik De Bie Date: Sat, 8 Nov 2014 07:57:34 +0000 (-0800) Subject: Input: elantech - fix crc_enabled for Fujitsu H730 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0dc1587905a50f8f61bbc29e850aa592821e4bea;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git Input: elantech - fix crc_enabled for Fujitsu H730 The Fujitsu H730 does not work with crc_enabled = 0, even though the crc_enabled bit in the firmware version indicated it would. When switching this value to crc_enabled to 1, the touchpad works. This patch uses DMI to detect H730. Reported-by: Stefan Valouch Tested-by: Stefan Valouch Tested-by: Alfredo Gemma Signed-off-by: Ulrik De Bie Acked-by: Hans de Goede Signed-off-by: Dmitry Torokhov --- diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 53ddff91ab2e..ce699eba9adc 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -1450,6 +1450,22 @@ static int elantech_reconnect(struct psmouse *psmouse) return 0; } +/* + * Some hw_version 4 models do not work with crc_disabled + */ +static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = { +#if defined(CONFIG_DMI) && defined(CONFIG_X86) + { + /* Fujitsu H730 does not work with crc_enabled == 0 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"), + DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"), + }, + }, +#endif + { } +}; + /* * Some hw_version 3 models go into error state when we try to set * bit 3 and/or bit 1 of r10. @@ -1525,7 +1541,8 @@ static int elantech_set_properties(struct elantech_data *etd) * The signatures of v3 and v4 packets change depending on the * value of this hardware flag. */ - etd->crc_enabled = ((etd->fw_version & 0x4000) == 0x4000); + etd->crc_enabled = (etd->fw_version & 0x4000) == 0x4000 || + dmi_check_system(elantech_dmi_force_crc_enabled); /* Enable real hardware resolution on hw_version 3 ? */ etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);