From: Thomas Bogendoerfer Date: Thu, 13 Jul 2017 08:57:40 +0000 (+0200) Subject: xgene: Don't fail probe, if there is no clk resource for SGMII interfaces X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0db01097cabd97897d123b4c5d805d1a7b061d82;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git xgene: Don't fail probe, if there is no clk resource for SGMII interfaces This change fixes following problem [ 1.827940] xgene-enet: probe of 1f210030.ethernet failed with error -2 which leads to a missing ethernet interface (reproducable at least on Gigabyte MP30-AR0 and APM Mustang systems). The check for a valid clk resource fails, because DT doesn't provide a clock for sgenet1. But the driver doesn't use this clk, if the ethernet port is connected via SGMII. Therefore this patch avoids probing for clk on SGMII interfaces. Fixes: 9aea7779b764 ("drivers: net: xgene: Fix crash on DT systems") Signed-off-by: Thomas Bogendoerfer Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c index d3906f6b01bd..86058a9f3417 100644 --- a/drivers/net/ethernet/apm/xgene/xgene_enet_main.c +++ b/drivers/net/ethernet/apm/xgene/xgene_enet_main.c @@ -1785,16 +1785,18 @@ static int xgene_enet_get_resources(struct xgene_enet_pdata *pdata) xgene_enet_gpiod_get(pdata); - pdata->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(pdata->clk)) { - /* Abort if the clock is defined but couldn't be retrived. - * Always abort if the clock is missing on DT system as - * the driver can't cope with this case. - */ - if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node) - return PTR_ERR(pdata->clk); - /* Firmware may have set up the clock already. */ - dev_info(dev, "clocks have been setup already\n"); + if (pdata->phy_mode != PHY_INTERFACE_MODE_SGMII) { + pdata->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(pdata->clk)) { + /* Abort if the clock is defined but couldn't be + * retrived. Always abort if the clock is missing on + * DT system as the driver can't cope with this case. + */ + if (PTR_ERR(pdata->clk) != -ENOENT || dev->of_node) + return PTR_ERR(pdata->clk); + /* Firmware may have set up the clock already. */ + dev_info(dev, "clocks have been setup already\n"); + } } if (pdata->phy_mode != PHY_INTERFACE_MODE_XGMII)