From: Paul Burton Date: Sun, 24 May 2015 15:11:44 +0000 (+0100) Subject: serial: 8250_ingenic: support for Ingenic SoC UARTs X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0cf985f487be8e24237faaa8c96cbcf78382a498;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git serial: 8250_ingenic: support for Ingenic SoC UARTs Introduce a driver suitable for use with the UARTs present in Ingenic SoCs such as the JZ4740 & JZ4780. These are described as being ns16550 compatible but aren't quite - they require the setting of an extra bit in the FCR register to enable the UART module. The serial_out implementation is the same as that in arch/mips/jz4740/serial.c - which will shortly be removed. Signed-off-by: Paul Burton Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Lars-Peter Clausen Cc: linux-serial@vger.kernel.org Cc: linux-mips@linux-mips.org Cc: Sebastian Andrzej Siewior Cc: Peter Hurley Cc: Alan Cox Cc: linux-kernel@vger.kernel.org Cc: Matthias Brugger Cc: Ricardo Ribalda Delgado Cc: Tony Lindgren Cc: John Crispin Patchwork: https://patchwork.linux-mips.org/patch/10159/ Signed-off-by: Ralf Baechle --- diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c new file mode 100644 index 000000000000..21bf81fe794f --- /dev/null +++ b/drivers/tty/serial/8250/8250_ingenic.c @@ -0,0 +1,266 @@ +/* + * Copyright (C) 2010 Lars-Peter Clausen + * Copyright (C) 2015 Imagination Technologies + * + * Ingenic SoC UART support + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct ingenic_uart_data { + struct clk *clk_module; + struct clk *clk_baud; + int line; +}; + +#define UART_FCR_UME BIT(4) + +static struct earlycon_device *early_device; + +static uint8_t __init early_in(struct uart_port *port, int offset) +{ + return readl(port->membase + (offset << 2)); +} + +static void __init early_out(struct uart_port *port, int offset, uint8_t value) +{ + writel(value, port->membase + (offset << 2)); +} + +static void __init ingenic_early_console_putc(struct uart_port *port, int c) +{ + uint8_t lsr; + + do { + lsr = early_in(port, UART_LSR); + } while ((lsr & UART_LSR_TEMT) == 0); + + early_out(port, UART_TX, c); +} + +static void __init ingenic_early_console_write(struct console *console, + const char *s, unsigned int count) +{ + uart_console_write(&early_device->port, s, count, + ingenic_early_console_putc); +} + +static void __init ingenic_early_console_setup_clock(struct earlycon_device *dev) +{ + void *fdt = initial_boot_params; + const __be32 *prop; + int offset; + + offset = fdt_path_offset(fdt, "/ext"); + if (offset < 0) + return; + + prop = fdt_getprop(fdt, offset, "clock-frequency", NULL); + if (!prop) + return; + + dev->port.uartclk = be32_to_cpup(prop); +} + +static int __init ingenic_early_console_setup(struct earlycon_device *dev, + const char *opt) +{ + struct uart_port *port = &dev->port; + unsigned int baud, divisor; + + if (!dev->port.membase) + return -ENODEV; + + ingenic_early_console_setup_clock(dev); + + baud = dev->baud ?: 115200; + divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud); + + early_out(port, UART_IER, 0); + early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8); + early_out(port, UART_DLL, 0); + early_out(port, UART_DLM, 0); + early_out(port, UART_LCR, UART_LCR_WLEN8); + early_out(port, UART_FCR, UART_FCR_UME | UART_FCR_CLEAR_XMIT | + UART_FCR_CLEAR_RCVR | UART_FCR_ENABLE_FIFO); + early_out(port, UART_MCR, UART_MCR_RTS | UART_MCR_DTR); + + early_out(port, UART_LCR, UART_LCR_DLAB | UART_LCR_WLEN8); + early_out(port, UART_DLL, divisor & 0xff); + early_out(port, UART_DLM, (divisor >> 8) & 0xff); + early_out(port, UART_LCR, UART_LCR_WLEN8); + + early_device = dev; + dev->con->write = ingenic_early_console_write; + + return 0; +} + +EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup); +OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart", + ingenic_early_console_setup); + +EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup); +OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart", + ingenic_early_console_setup); + +EARLYCON_DECLARE(jz4780_uart, ingenic_early_console_setup); +OF_EARLYCON_DECLARE(jz4780_uart, "ingenic,jz4780-uart", + ingenic_early_console_setup); + +static void ingenic_uart_serial_out(struct uart_port *p, int offset, int value) +{ + switch (offset) { + case UART_FCR: + /* UART module enable */ + value |= UART_FCR_UME; + break; + + case UART_IER: + value |= (value & 0x4) << 2; + break; + + default: + break; + } + + writeb(value, p->membase + (offset << p->regshift)); +} + +static int ingenic_uart_probe(struct platform_device *pdev) +{ + struct uart_8250_port uart = {}; + struct resource *regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); + struct resource *irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + struct ingenic_uart_data *data; + int err, line; + + if (!regs || !irq) { + dev_err(&pdev->dev, "no registers/irq defined\n"); + return -EINVAL; + } + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + spin_lock_init(&uart.port.lock); + uart.port.type = PORT_16550; + uart.port.flags = UPF_SKIP_TEST | UPF_IOREMAP | UPF_FIXED_TYPE; + uart.port.iotype = UPIO_MEM; + uart.port.mapbase = regs->start; + uart.port.regshift = 2; + uart.port.serial_out = ingenic_uart_serial_out; + uart.port.irq = irq->start; + uart.port.dev = &pdev->dev; + + /* Check for a fixed line number */ + line = of_alias_get_id(pdev->dev.of_node, "serial"); + if (line >= 0) + uart.port.line = line; + + uart.port.membase = devm_ioremap(&pdev->dev, regs->start, + resource_size(regs)); + if (!uart.port.membase) + return -ENOMEM; + + data->clk_module = devm_clk_get(&pdev->dev, "module"); + if (IS_ERR(data->clk_module)) { + err = PTR_ERR(data->clk_module); + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, + "unable to get module clock: %d\n", err); + return err; + } + + data->clk_baud = devm_clk_get(&pdev->dev, "baud"); + if (IS_ERR(data->clk_baud)) { + err = PTR_ERR(data->clk_baud); + if (err != -EPROBE_DEFER) + dev_err(&pdev->dev, + "unable to get baud clock: %d\n", err); + return err; + } + + err = clk_prepare_enable(data->clk_module); + if (err) { + dev_err(&pdev->dev, "could not enable module clock: %d\n", err); + goto out; + } + + err = clk_prepare_enable(data->clk_baud); + if (err) { + dev_err(&pdev->dev, "could not enable baud clock: %d\n", err); + goto out_disable_moduleclk; + } + uart.port.uartclk = clk_get_rate(data->clk_baud); + + data->line = serial8250_register_8250_port(&uart); + if (data->line < 0) { + err = data->line; + goto out_disable_baudclk; + } + + platform_set_drvdata(pdev, data); + return 0; + +out_disable_baudclk: + clk_disable_unprepare(data->clk_baud); +out_disable_moduleclk: + clk_disable_unprepare(data->clk_module); +out: + return err; +} + +static int ingenic_uart_remove(struct platform_device *pdev) +{ + struct ingenic_uart_data *data = platform_get_drvdata(pdev); + + serial8250_unregister_port(data->line); + clk_disable_unprepare(data->clk_module); + clk_disable_unprepare(data->clk_baud); + return 0; +} + +static const struct of_device_id of_match[] = { + { .compatible = "ingenic,jz4740-uart" }, + { .compatible = "ingenic,jz4775-uart" }, + { .compatible = "ingenic,jz4780-uart" }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, of_match); + +static struct platform_driver ingenic_uart_platform_driver = { + .driver = { + .name = "ingenic-uart", + .owner = THIS_MODULE, + .of_match_table = of_match, + }, + .probe = ingenic_uart_probe, + .remove = ingenic_uart_remove, +}; + +module_platform_driver(ingenic_uart_platform_driver); + +MODULE_AUTHOR("Paul Burton"); +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Ingenic SoC UART driver"); diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig index c35070356528..43330ea95cfd 100644 --- a/drivers/tty/serial/8250/Kconfig +++ b/drivers/tty/serial/8250/Kconfig @@ -342,3 +342,12 @@ config SERIAL_8250_MT6577 help If you have a Mediatek based board and want to use the serial port, say Y to this option. If unsure, say N. + +config SERIAL_8250_INGENIC + bool "Support for Ingenic SoC serial ports" + depends on SERIAL_8250_CONSOLE && OF_FLATTREE + select LIBFDT + select SERIAL_EARLYCON + help + If you have a system using an Ingenic SoC and wish to make use of + its UARTs, say Y to this option. If unsure, say N. diff --git a/drivers/tty/serial/8250/Makefile b/drivers/tty/serial/8250/Makefile index 31e7cdc6865c..98fba26e194a 100644 --- a/drivers/tty/serial/8250/Makefile +++ b/drivers/tty/serial/8250/Makefile @@ -23,3 +23,6 @@ obj-$(CONFIG_SERIAL_8250_EM) += 8250_em.o obj-$(CONFIG_SERIAL_8250_OMAP) += 8250_omap.o obj-$(CONFIG_SERIAL_8250_FINTEK) += 8250_fintek.o obj-$(CONFIG_SERIAL_8250_MT6577) += 8250_mtk.o +obj-$(CONFIG_SERIAL_8250_INGENIC) += 8250_ingenic.o + +CFLAGS_8250_ingenic.o += -I$(srctree)/scripts/dtc/libfdt