From: Yuantian Tang Date: Fri, 2 Jun 2017 07:23:03 +0000 (+0800) Subject: ahci: qoriq: add ls1088a platforms support X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0cee73f751ceb507d052f1a45d5f5f38bc33b25a;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ahci: qoriq: add ls1088a platforms support Ls1088a is new introduced arm-based soc with sata support with following features: * Complies with the serial ATA 3.0 specification and the AHCI 1.3.1 specification * Contains a high-speed descriptor-based DMA controller * Supports the following: * Speeds of 1.5 Gb/s (first-generation SATA), 3 Gb/s (second-generation SATA), and 6 Gb/s (third-generation SATA) * FIS-based switching * Native command queuing (NCQ) commands * Port multiplier operation * Asynchronous notification * SATA Vendor BIST mode Signed-off-by: Tang Yuantian Signed-off-by: Tejun Heo --- diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c index 4c96f3ac4976..b6b0bf76dfc7 100644 --- a/drivers/ata/ahci_qoriq.c +++ b/drivers/ata/ahci_qoriq.c @@ -47,12 +47,14 @@ #define SATA_ECC_DISABLE 0x00020000 #define ECC_DIS_ARMV8_CH2 0x80000000 +#define ECC_DIS_LS1088A 0x40000000 enum ahci_qoriq_type { AHCI_LS1021A, AHCI_LS1043A, AHCI_LS2080A, AHCI_LS1046A, + AHCI_LS1088A, AHCI_LS2088A, }; @@ -68,6 +70,7 @@ static const struct of_device_id ahci_qoriq_of_match[] = { { .compatible = "fsl,ls1043a-ahci", .data = (void *)AHCI_LS1043A}, { .compatible = "fsl,ls2080a-ahci", .data = (void *)AHCI_LS2080A}, { .compatible = "fsl,ls1046a-ahci", .data = (void *)AHCI_LS1046A}, + { .compatible = "fsl,ls1088a-ahci", .data = (void *)AHCI_LS1088A}, { .compatible = "fsl,ls2088a-ahci", .data = (void *)AHCI_LS2088A}, {}, }; @@ -203,6 +206,17 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv) writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); break; + case AHCI_LS1088A: + if (!qpriv->ecc_addr) + return -EINVAL; + writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A, + qpriv->ecc_addr); + writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); + writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS); + if (qpriv->is_dmacoherent) + writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC); + break; + case AHCI_LS2088A: writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1); writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);