From: Sonic Zhang Date: Tue, 19 Jul 2011 10:09:25 +0000 (+0800) Subject: serial:blackfin: rename Blackfin serial driver to bfin_uart.c X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0c6967b5a0;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git serial:blackfin: rename Blackfin serial driver to bfin_uart.c bfin_5xx.c is not a general name for all Blackfin chips. Signed-off-by: Sonic Zhang Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 4dcb37bbdf92..a9b307f582e1 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -722,7 +722,7 @@ config SERIAL_BFIN Add support for the built-in UARTs on the Blackfin. To compile this driver as a module, choose M here: the - module will be called bfin_5xx. + module is named bfin_uart.ko. config SERIAL_BFIN_CONSOLE bool "Console on Blackfin serial port" diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile index 83b4da6a1062..78748136ccc8 100644 --- a/drivers/tty/serial/Makefile +++ b/drivers/tty/serial/Makefile @@ -35,7 +35,7 @@ obj-$(CONFIG_SERIAL_PXA) += pxa.o obj-$(CONFIG_SERIAL_PNX8XXX) += pnx8xxx_uart.o obj-$(CONFIG_SERIAL_SA1100) += sa1100.o obj-$(CONFIG_SERIAL_BCM63XX) += bcm63xx_uart.o -obj-$(CONFIG_SERIAL_BFIN) += bfin_5xx.o +obj-$(CONFIG_SERIAL_BFIN) += bfin_uart.o obj-$(CONFIG_SERIAL_BFIN_SPORT) += bfin_sport_uart.o obj-$(CONFIG_SERIAL_SAMSUNG) += samsung.o obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o diff --git a/drivers/tty/serial/bfin_5xx.c b/drivers/tty/serial/bfin_5xx.c deleted file mode 100644 index e08bc046c1bd..000000000000 --- a/drivers/tty/serial/bfin_5xx.c +++ /dev/null @@ -1,1603 +0,0 @@ -/* - * Blackfin On-Chip Serial Driver - * - * Copyright 2006-2010 Analog Devices Inc. - * - * Enter bugs at http://blackfin.uclinux.org/ - * - * Licensed under the GPL-2 or later. - */ - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#define DRIVER_NAME "bfin-uart" -#define pr_fmt(fmt) DRIVER_NAME ": " fmt - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) -#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) -#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) -#include - -#ifdef CONFIG_SERIAL_BFIN_MODULE -# undef CONFIG_EARLY_PRINTK -#endif - -#ifdef CONFIG_SERIAL_BFIN_MODULE -# undef CONFIG_EARLY_PRINTK -#endif - -/* UART name and device definitions */ -#define BFIN_SERIAL_DEV_NAME "ttyBF" -#define BFIN_SERIAL_MAJOR 204 -#define BFIN_SERIAL_MINOR 64 - -static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS]; - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - -# ifndef CONFIG_SERIAL_BFIN_PIO -# error KGDB only support UART in PIO mode. -# endif - -static int kgdboc_port_line; -static int kgdboc_break_enabled; -#endif -/* - * Setup for console. Argument comes from the menuconfig - */ -#define DMA_RX_XCOUNT 512 -#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) - -#define DMA_RX_FLUSH_JIFFIES (HZ / 50) - -#ifdef CONFIG_SERIAL_BFIN_DMA -static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); -#else -static void bfin_serial_tx_chars(struct bfin_serial_port *uart); -#endif - -static void bfin_serial_reset_irda(struct uart_port *port); - -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) -static unsigned int bfin_serial_get_mctrl(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - if (uart->cts_pin < 0) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - - /* CTS PIN is negative assertive. */ - if (UART_GET_CTS(uart)) - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; - else - return TIOCM_DSR | TIOCM_CAR; -} - -static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - if (uart->rts_pin < 0) - return; - - /* RTS PIN is negative assertive. */ - if (mctrl & TIOCM_RTS) - UART_ENABLE_RTS(uart); - else - UART_DISABLE_RTS(uart); -} - -/* - * Handle any change of modem status signal. - */ -static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - unsigned int status; - - status = bfin_serial_get_mctrl(&uart->port); - uart_handle_cts_change(&uart->port, status & TIOCM_CTS); -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - uart->scts = 1; - UART_CLEAR_SCTS(uart); - UART_CLEAR_IER(uart, EDSSI); -#endif - - return IRQ_HANDLED; -} -#else -static unsigned int bfin_serial_get_mctrl(struct uart_port *port) -{ - return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; -} - -static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ -} -#endif - -/* - * interrupts are disabled on entry - */ -static void bfin_serial_stop_tx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifdef CONFIG_SERIAL_BFIN_DMA - struct circ_buf *xmit = &uart->port.state->xmit; -#endif - - while (!(UART_GET_LSR(uart) & TEMT)) - cpu_relax(); - -#ifdef CONFIG_SERIAL_BFIN_DMA - disable_dma(uart->tx_dma_channel); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - uart->tx_count = 0; - uart->tx_done = 1; -#else -#ifdef CONFIG_BF54x - /* Clear TFI bit */ - UART_PUT_LSR(uart, TFI); -#endif - UART_CLEAR_IER(uart, ETBEI); -#endif -} - -/* - * port is locked and interrupts are disabled - */ -static void bfin_serial_start_tx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - struct tty_struct *tty = uart->port.state->port.tty; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - - /* - * To avoid losting RX interrupt, we reset IR function - * before sending data. - */ - if (tty->termios->c_line == N_IRDA) - bfin_serial_reset_irda(port); - -#ifdef CONFIG_SERIAL_BFIN_DMA - if (uart->tx_done) - bfin_serial_dma_tx_chars(uart); -#else - UART_SET_IER(uart, ETBEI); - bfin_serial_tx_chars(uart); -#endif -} - -/* - * Interrupts are enabled - */ -static void bfin_serial_stop_rx(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - UART_CLEAR_IER(uart, ERBFI); -} - -/* - * Set the modem control timer to fire immediately. - */ -static void bfin_serial_enable_ms(struct uart_port *port) -{ -} - - -#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) -# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) -# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) -#else -# define UART_GET_ANOMALY_THRESHOLD(uart) 0 -# define UART_SET_ANOMALY_THRESHOLD(uart, v) -#endif - -#ifdef CONFIG_SERIAL_BFIN_PIO -static void bfin_serial_rx_chars(struct bfin_serial_port *uart) -{ - struct tty_struct *tty = NULL; - unsigned int status, ch, flg; - static struct timeval anomaly_start = { .tv_sec = 0 }; - - status = UART_GET_LSR(uart); - UART_CLEAR_LSR(uart); - - ch = UART_GET_CHAR(uart); - uart->port.icount.rx++; - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdb_connected && kgdboc_port_line == uart->port.line - && kgdboc_break_enabled) - if (ch == 0x3) {/* Ctrl + C */ - kgdb_breakpoint(); - return; - } - - if (!uart->port.state || !uart->port.state->port.tty) - return; -#endif - tty = uart->port.state->port.tty; - - if (ANOMALY_05000363) { - /* The BF533 (and BF561) family of processors have a nice anomaly - * where they continuously generate characters for a "single" break. - * We have to basically ignore this flood until the "next" valid - * character comes across. Due to the nature of the flood, it is - * not possible to reliably catch bytes that are sent too quickly - * after this break. So application code talking to the Blackfin - * which sends a break signal must allow at least 1.5 character - * times after the end of the break for things to stabilize. This - * timeout was picked as it must absolutely be larger than 1 - * character time +/- some percent. So 1.5 sounds good. All other - * Blackfin families operate properly. Woo. - */ - if (anomaly_start.tv_sec) { - struct timeval curr; - suseconds_t usecs; - - if ((~ch & (~ch + 1)) & 0xff) - goto known_good_char; - - do_gettimeofday(&curr); - if (curr.tv_sec - anomaly_start.tv_sec > 1) - goto known_good_char; - - usecs = 0; - if (curr.tv_sec != anomaly_start.tv_sec) - usecs += USEC_PER_SEC; - usecs += curr.tv_usec - anomaly_start.tv_usec; - - if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) - goto known_good_char; - - if (ch) - anomaly_start.tv_sec = 0; - else - anomaly_start = curr; - - return; - - known_good_char: - status &= ~BI; - anomaly_start.tv_sec = 0; - } - } - - if (status & BI) { - if (ANOMALY_05000363) - if (bfin_revid() < 5) - do_gettimeofday(&anomaly_start); - uart->port.icount.brk++; - if (uart_handle_break(&uart->port)) - goto ignore_char; - status &= ~(PE | FE); - } - if (status & PE) - uart->port.icount.parity++; - if (status & OE) - uart->port.icount.overrun++; - if (status & FE) - uart->port.icount.frame++; - - status &= uart->port.read_status_mask; - - if (status & BI) - flg = TTY_BREAK; - else if (status & PE) - flg = TTY_PARITY; - else if (status & FE) - flg = TTY_FRAME; - else - flg = TTY_NORMAL; - - if (uart_handle_sysrq_char(&uart->port, ch)) - goto ignore_char; - - uart_insert_char(&uart->port, status, OE, ch, flg); - - ignore_char: - tty_flip_buffer_push(tty); -} - -static void bfin_serial_tx_chars(struct bfin_serial_port *uart) -{ - struct circ_buf *xmit = &uart->port.state->xmit; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { -#ifdef CONFIG_BF54x - /* Clear TFI bit */ - UART_PUT_LSR(uart, TFI); -#endif - /* Anomaly notes: - * 05000215 - we always clear ETBEI within last UART TX - * interrupt to end a string. It is always set - * when start a new tx. - */ - UART_CLEAR_IER(uart, ETBEI); - return; - } - - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } - - while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { - UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx++; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); -} - -static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - - while (UART_GET_LSR(uart) & DR) - bfin_serial_rx_chars(uart); - - return IRQ_HANDLED; -} - -static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - spin_lock(&uart->port.lock); - if (UART_GET_LSR(uart) & THRE) - bfin_serial_tx_chars(uart); - spin_unlock(&uart->port.lock); - - return IRQ_HANDLED; -} -#endif - -#ifdef CONFIG_SERIAL_BFIN_DMA -static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) -{ - struct circ_buf *xmit = &uart->port.state->xmit; - - uart->tx_done = 0; - - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - uart->tx_count = 0; - uart->tx_done = 1; - return; - } - - if (uart->port.x_char) { - UART_PUT_CHAR(uart, uart->port.x_char); - uart->port.icount.tx++; - uart->port.x_char = 0; - } - - uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); - if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) - uart->tx_count = UART_XMIT_SIZE - xmit->tail; - blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), - (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); - set_dma_config(uart->tx_dma_channel, - set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, - INTR_ON_BUF, - DIMENSION_LINEAR, - DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); - set_dma_x_count(uart->tx_dma_channel, uart->tx_count); - set_dma_x_modify(uart->tx_dma_channel, 1); - SSYNC(); - enable_dma(uart->tx_dma_channel); - - UART_SET_IER(uart, ETBEI); -} - -static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) -{ - struct tty_struct *tty = uart->port.state->port.tty; - int i, flg, status; - - status = UART_GET_LSR(uart); - UART_CLEAR_LSR(uart); - - uart->port.icount.rx += - CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, - UART_XMIT_SIZE); - - if (status & BI) { - uart->port.icount.brk++; - if (uart_handle_break(&uart->port)) - goto dma_ignore_char; - status &= ~(PE | FE); - } - if (status & PE) - uart->port.icount.parity++; - if (status & OE) - uart->port.icount.overrun++; - if (status & FE) - uart->port.icount.frame++; - - status &= uart->port.read_status_mask; - - if (status & BI) - flg = TTY_BREAK; - else if (status & PE) - flg = TTY_PARITY; - else if (status & FE) - flg = TTY_FRAME; - else - flg = TTY_NORMAL; - - for (i = uart->rx_dma_buf.tail; ; i++) { - if (i >= UART_XMIT_SIZE) - i = 0; - if (i == uart->rx_dma_buf.head) - break; - if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) - uart_insert_char(&uart->port, status, OE, - uart->rx_dma_buf.buf[i], flg); - } - - dma_ignore_char: - tty_flip_buffer_push(tty); -} - -void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) -{ - int x_pos, pos; - - dma_disable_irq_nosync(uart->rx_dma_channel); - spin_lock_bh(&uart->rx_lock); - - /* 2D DMA RX buffer ring is used. Because curr_y_count and - * curr_x_count can't be read as an atomic operation, - * curr_y_count should be read before curr_x_count. When - * curr_x_count is read, curr_y_count may already indicate - * next buffer line. But, the position calculated here is - * still indicate the old line. The wrong position data may - * be smaller than current buffer tail, which cause garbages - * are received if it is not prohibit. - */ - uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); - x_pos = get_dma_curr_xcount(uart->rx_dma_channel); - uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) - uart->rx_dma_nrows = 0; - x_pos = DMA_RX_XCOUNT - x_pos; - if (x_pos == DMA_RX_XCOUNT) - x_pos = 0; - - pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; - /* Ignore receiving data if new position is in the same line of - * current buffer tail and small. - */ - if (pos > uart->rx_dma_buf.tail || - uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } - - spin_unlock_bh(&uart->rx_lock); - dma_enable_irq(uart->rx_dma_channel); - - mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); -} - -static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - struct circ_buf *xmit = &uart->port.state->xmit; - -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { - uart->scts = 0; - uart_handle_cts_change(&uart->port, uart->scts); - } -#endif - - spin_lock(&uart->port.lock); - if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { - disable_dma(uart->tx_dma_channel); - clear_dma_irqstat(uart->tx_dma_channel); - /* Anomaly notes: - * 05000215 - we always clear ETBEI within last UART TX - * interrupt to end a string. It is always set - * when start a new tx. - */ - UART_CLEAR_IER(uart, ETBEI); - xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); - uart->port.icount.tx += uart->tx_count; - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(&uart->port); - - bfin_serial_dma_tx_chars(uart); - } - - spin_unlock(&uart->port.lock); - return IRQ_HANDLED; -} - -static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) -{ - struct bfin_serial_port *uart = dev_id; - unsigned short irqstat; - int x_pos, pos; - - spin_lock(&uart->rx_lock); - irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); - clear_dma_irqstat(uart->rx_dma_channel); - - uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); - x_pos = get_dma_curr_xcount(uart->rx_dma_channel); - uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; - if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) - uart->rx_dma_nrows = 0; - - pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; - if (pos > uart->rx_dma_buf.tail || - uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { - uart->rx_dma_buf.head = pos; - bfin_serial_dma_rx_chars(uart); - uart->rx_dma_buf.tail = uart->rx_dma_buf.head; - } - - spin_unlock(&uart->rx_lock); - - return IRQ_HANDLED; -} -#endif - -/* - * Return TIOCSER_TEMT when transmitter is not busy. - */ -static unsigned int bfin_serial_tx_empty(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short lsr; - - lsr = UART_GET_LSR(uart); - if (lsr & TEMT) - return TIOCSER_TEMT; - else - return 0; -} - -static void bfin_serial_break_ctl(struct uart_port *port, int break_state) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - u16 lcr = UART_GET_LCR(uart); - if (break_state) - lcr |= SB; - else - lcr &= ~SB; - UART_PUT_LCR(uart, lcr); - SSYNC(); -} - -static int bfin_serial_startup(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - -#ifdef CONFIG_SERIAL_BFIN_DMA - dma_addr_t dma_handle; - - if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { - printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); - return -EBUSY; - } - - if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { - printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); - free_dma(uart->rx_dma_channel); - return -EBUSY; - } - - set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); - set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); - - uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); - uart->rx_dma_buf.head = 0; - uart->rx_dma_buf.tail = 0; - uart->rx_dma_nrows = 0; - - set_dma_config(uart->rx_dma_channel, - set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, - INTR_ON_ROW, DIMENSION_2D, - DATA_SIZE_8, - DMA_SYNC_RESTART)); - set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); - set_dma_x_modify(uart->rx_dma_channel, 1); - set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); - set_dma_y_modify(uart->rx_dma_channel, 1); - set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); - enable_dma(uart->rx_dma_channel); - - uart->rx_dma_timer.data = (unsigned long)(uart); - uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout; - uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; - add_timer(&(uart->rx_dma_timer)); -#else -# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) - kgdboc_break_enabled = 0; - else { -# endif - if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, - "BFIN_UART_RX", uart)) { - printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); - return -EBUSY; - } - - if (request_irq - (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, - "BFIN_UART_TX", uart)) { - printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); - free_irq(uart->port.irq, uart); - return -EBUSY; - } - -# ifdef CONFIG_BF54x - { - /* - * UART2 and UART3 on BF548 share interrupt PINs and DMA - * controllers with SPORT2 and SPORT3. UART rx and tx - * interrupts are generated in PIO mode only when configure - * their peripheral mapping registers properly, which means - * request corresponding DMA channels in PIO mode as well. - */ - unsigned uart_dma_ch_rx, uart_dma_ch_tx; - - switch (uart->port.irq) { - case IRQ_UART3_RX: - uart_dma_ch_rx = CH_UART3_RX; - uart_dma_ch_tx = CH_UART3_TX; - break; - case IRQ_UART2_RX: - uart_dma_ch_rx = CH_UART2_RX; - uart_dma_ch_tx = CH_UART2_TX; - break; - default: - uart_dma_ch_rx = uart_dma_ch_tx = 0; - break; - }; - - if (uart_dma_ch_rx && - request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { - printk(KERN_NOTICE"Fail to attach UART interrupt\n"); - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq + 1, uart); - return -EBUSY; - } - if (uart_dma_ch_tx && - request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) { - printk(KERN_NOTICE "Fail to attach UART interrupt\n"); - free_dma(uart_dma_ch_rx); - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq + 1, uart); - return -EBUSY; - } - } -# endif -# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - } -# endif -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) { - if (request_irq(gpio_to_irq(uart->cts_pin), - bfin_serial_mctrl_cts_int, - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | - IRQF_DISABLED, "BFIN_UART_CTS", uart)) { - uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); - } - } - if (uart->rts_pin >= 0) - gpio_direction_output(uart->rts_pin, 0); -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0 && request_irq(uart->status_irq, - bfin_serial_mctrl_cts_int, - IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { - uart->cts_pin = -1; - pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); - } - - /* CTS RTS PINs are negative assertive. */ - UART_PUT_MCR(uart, ACTS); - UART_SET_IER(uart, EDSSI); -#endif - - UART_SET_IER(uart, ERBFI); - return 0; -} - -static void bfin_serial_shutdown(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - -#ifdef CONFIG_SERIAL_BFIN_DMA - disable_dma(uart->tx_dma_channel); - free_dma(uart->tx_dma_channel); - disable_dma(uart->rx_dma_channel); - free_dma(uart->rx_dma_channel); - del_timer(&(uart->rx_dma_timer)); - dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); -#else -#ifdef CONFIG_BF54x - switch (uart->port.irq) { - case IRQ_UART3_RX: - free_dma(CH_UART3_RX); - free_dma(CH_UART3_TX); - break; - case IRQ_UART2_RX: - free_dma(CH_UART2_RX); - free_dma(CH_UART2_TX); - break; - default: - break; - }; -#endif - free_irq(uart->port.irq, uart); - free_irq(uart->port.irq+1, uart); -#endif - -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->cts_pin >= 0) - free_irq(gpio_to_irq(uart->cts_pin), uart); -#endif -#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS - if (uart->cts_pin >= 0) - free_irq(uart->status_irq, uart); -#endif -} - -static void -bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, - struct ktermios *old) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned long flags; - unsigned int baud, quot; - unsigned short val, ier, lcr = 0; - - switch (termios->c_cflag & CSIZE) { - case CS8: - lcr = WLS(8); - break; - case CS7: - lcr = WLS(7); - break; - case CS6: - lcr = WLS(6); - break; - case CS5: - lcr = WLS(5); - break; - default: - printk(KERN_ERR "%s: word lengh not supported\n", - __func__); - } - - /* Anomaly notes: - * 05000231 - STOP bit is always set to 1 whatever the user is set. - */ - if (termios->c_cflag & CSTOPB) { - if (ANOMALY_05000231) - printk(KERN_WARNING "STOP bits other than 1 is not " - "supported in case of anomaly 05000231.\n"); - else - lcr |= STB; - } - if (termios->c_cflag & PARENB) - lcr |= PEN; - if (!(termios->c_cflag & PARODD)) - lcr |= EPS; - if (termios->c_cflag & CMSPAR) - lcr |= STP; - - spin_lock_irqsave(&uart->port.lock, flags); - - port->read_status_mask = OE; - if (termios->c_iflag & INPCK) - port->read_status_mask |= (FE | PE); - if (termios->c_iflag & (BRKINT | PARMRK)) - port->read_status_mask |= BI; - - /* - * Characters to ignore - */ - port->ignore_status_mask = 0; - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= FE | PE; - if (termios->c_iflag & IGNBRK) { - port->ignore_status_mask |= BI; - /* - * If we're ignoring parity and break indicators, - * ignore overruns too (for real raw support). - */ - if (termios->c_iflag & IGNPAR) - port->ignore_status_mask |= OE; - } - - baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); - quot = uart_get_divisor(port, baud); - - /* If discipline is not IRDA, apply ANOMALY_05000230 */ - if (termios->c_line != N_IRDA) - quot -= ANOMALY_05000230; - - UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); - - /* Disable UART */ - ier = UART_GET_IER(uart); - UART_DISABLE_INTS(uart); - - /* Set DLAB in LCR to Access DLL and DLH */ - UART_SET_DLAB(uart); - - UART_PUT_DLL(uart, quot & 0xFF); - UART_PUT_DLH(uart, (quot >> 8) & 0xFF); - SSYNC(); - - /* Clear DLAB in LCR to Access THR RBR IER */ - UART_CLEAR_DLAB(uart); - - UART_PUT_LCR(uart, lcr); - - /* Enable UART */ - UART_ENABLE_INTS(uart, ier); - - val = UART_GET_GCTL(uart); - val |= UCEN; - UART_PUT_GCTL(uart, val); - - /* Port speed changed, update the per-port timeout. */ - uart_update_timeout(port, termios->c_cflag, baud); - - spin_unlock_irqrestore(&uart->port.lock, flags); -} - -static const char *bfin_serial_type(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; -} - -/* - * Release the memory region(s) being used by 'port'. - */ -static void bfin_serial_release_port(struct uart_port *port) -{ -} - -/* - * Request the memory region(s) being used by 'port'. - */ -static int bfin_serial_request_port(struct uart_port *port) -{ - return 0; -} - -/* - * Configure/autoconfigure the port. - */ -static void bfin_serial_config_port(struct uart_port *port, int flags) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - if (flags & UART_CONFIG_TYPE && - bfin_serial_request_port(&uart->port) == 0) - uart->port.type = PORT_BFIN; -} - -/* - * Verify the new serial_struct (for TIOCSSERIAL). - * The only change we allow are to the flags and type, and - * even then only between PORT_BFIN and PORT_UNKNOWN - */ -static int -bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) -{ - return 0; -} - -/* - * Enable the IrDA function if tty->ldisc.num is N_IRDA. - * In other cases, disable IrDA function. - */ -static void bfin_serial_set_ldisc(struct uart_port *port, int ld) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short val; - - switch (ld) { - case N_IRDA: - val = UART_GET_GCTL(uart); - val |= (IREN | RPOLC); - UART_PUT_GCTL(uart, val); - break; - default: - val = UART_GET_GCTL(uart); - val &= ~(IREN | RPOLC); - UART_PUT_GCTL(uart, val); - } -} - -static void bfin_serial_reset_irda(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned short val; - - val = UART_GET_GCTL(uart); - val &= ~(IREN | RPOLC); - UART_PUT_GCTL(uart, val); - SSYNC(); - val |= (IREN | RPOLC); - UART_PUT_GCTL(uart, val); - SSYNC(); -} - -#ifdef CONFIG_CONSOLE_POLL -/* Anomaly notes: - * 05000099 - Because we only use THRE in poll_put and DR in poll_get, - * losing other bits of UART_LSR is not a problem here. - */ -static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - - while (!(UART_GET_LSR(uart) & THRE)) - cpu_relax(); - - UART_CLEAR_DLAB(uart); - UART_PUT_CHAR(uart, (unsigned char)chr); -} - -static int bfin_serial_poll_get_char(struct uart_port *port) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - unsigned char chr; - - while (!(UART_GET_LSR(uart) & DR)) - cpu_relax(); - - UART_CLEAR_DLAB(uart); - chr = UART_GET_CHAR(uart); - - return chr; -} -#endif - -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) -static void bfin_kgdboc_port_shutdown(struct uart_port *port) -{ - if (kgdboc_break_enabled) { - kgdboc_break_enabled = 0; - bfin_serial_shutdown(port); - } -} - -static int bfin_kgdboc_port_startup(struct uart_port *port) -{ - kgdboc_port_line = port->line; - kgdboc_break_enabled = !bfin_serial_startup(port); - return 0; -} -#endif - -static struct uart_ops bfin_serial_pops = { - .tx_empty = bfin_serial_tx_empty, - .set_mctrl = bfin_serial_set_mctrl, - .get_mctrl = bfin_serial_get_mctrl, - .stop_tx = bfin_serial_stop_tx, - .start_tx = bfin_serial_start_tx, - .stop_rx = bfin_serial_stop_rx, - .enable_ms = bfin_serial_enable_ms, - .break_ctl = bfin_serial_break_ctl, - .startup = bfin_serial_startup, - .shutdown = bfin_serial_shutdown, - .set_termios = bfin_serial_set_termios, - .set_ldisc = bfin_serial_set_ldisc, - .type = bfin_serial_type, - .release_port = bfin_serial_release_port, - .request_port = bfin_serial_request_port, - .config_port = bfin_serial_config_port, - .verify_port = bfin_serial_verify_port, -#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ - defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) - .kgdboc_port_startup = bfin_kgdboc_port_startup, - .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, -#endif -#ifdef CONFIG_CONSOLE_POLL - .poll_put_char = bfin_serial_poll_put_char, - .poll_get_char = bfin_serial_poll_get_char, -#endif -}; - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) -/* - * If the port was already initialised (eg, by a boot loader), - * try to determine the current setup. - */ -static void __init -bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, - int *parity, int *bits) -{ - unsigned short status; - - status = UART_GET_IER(uart) & (ERBFI | ETBEI); - if (status == (ERBFI | ETBEI)) { - /* ok, the port was enabled */ - u16 lcr, dlh, dll; - - lcr = UART_GET_LCR(uart); - - *parity = 'n'; - if (lcr & PEN) { - if (lcr & EPS) - *parity = 'e'; - else - *parity = 'o'; - } - switch (lcr & 0x03) { - case 0: - *bits = 5; - break; - case 1: - *bits = 6; - break; - case 2: - *bits = 7; - break; - case 3: - *bits = 8; - break; - } - /* Set DLAB in LCR to Access DLL and DLH */ - UART_SET_DLAB(uart); - - dll = UART_GET_DLL(uart); - dlh = UART_GET_DLH(uart); - - /* Clear DLAB in LCR to Access THR RBR IER */ - UART_CLEAR_DLAB(uart); - - *baud = get_sclk() / (16*(dll | dlh << 8)); - } - pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); -} - -static struct uart_driver bfin_serial_reg; - -static void bfin_serial_console_putchar(struct uart_port *port, int ch) -{ - struct bfin_serial_port *uart = (struct bfin_serial_port *)port; - while (!(UART_GET_LSR(uart) & THRE)) - barrier(); - UART_PUT_CHAR(uart, ch); -} - -#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || - defined (CONFIG_EARLY_PRINTK) */ - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE -#define CLASS_BFIN_CONSOLE "bfin-console" -/* - * Interrupts are disabled on entering - */ -static void -bfin_serial_console_write(struct console *co, const char *s, unsigned int count) -{ - struct bfin_serial_port *uart = bfin_serial_ports[co->index]; - unsigned long flags; - - spin_lock_irqsave(&uart->port.lock, flags); - uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); - spin_unlock_irqrestore(&uart->port.lock, flags); - -} - -static int __init -bfin_serial_console_setup(struct console *co, char *options) -{ - struct bfin_serial_port *uart; - int baud = 57600; - int bits = 8; - int parity = 'n'; -# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) - int flow = 'r'; -# else - int flow = 'n'; -# endif - - /* - * Check whether an invalid uart number has been specified, and - * if so, search for the first available port that does have - * console support. - */ - if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS) - return -ENODEV; - - uart = bfin_serial_ports[co->index]; - if (!uart) - return -ENODEV; - - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - else - bfin_serial_console_get_options(uart, &baud, &parity, &bits); - - return uart_set_options(&uart->port, co, baud, parity, bits, flow); -} - -static struct console bfin_serial_console = { - .name = BFIN_SERIAL_DEV_NAME, - .write = bfin_serial_console_write, - .device = uart_console_device, - .setup = bfin_serial_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bfin_serial_reg, -}; -#define BFIN_SERIAL_CONSOLE (&bfin_serial_console) -#else -#define BFIN_SERIAL_CONSOLE NULL -#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ - -#ifdef CONFIG_EARLY_PRINTK -static struct bfin_serial_port bfin_earlyprintk_port; -#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk" - -/* - * Interrupts are disabled on entering - */ -static void -bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count) -{ - unsigned long flags; - - if (bfin_earlyprintk_port.port.line != co->index) - return; - - spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags); - uart_console_write(&bfin_earlyprintk_port.port, s, count, - bfin_serial_console_putchar); - spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags); -} - -/* - * This should have a .setup or .early_setup in it, but then things get called - * without the command line options, and the baud rate gets messed up - so - * don't let the common infrastructure play with things. (see calls to setup - * & earlysetup in ./kernel/printk.c:register_console() - */ -static struct __initdata console bfin_early_serial_console = { - .name = "early_BFuart", - .write = bfin_earlyprintk_console_write, - .device = uart_console_device, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bfin_serial_reg, -}; -#endif - -static struct uart_driver bfin_serial_reg = { - .owner = THIS_MODULE, - .driver_name = DRIVER_NAME, - .dev_name = BFIN_SERIAL_DEV_NAME, - .major = BFIN_SERIAL_MAJOR, - .minor = BFIN_SERIAL_MINOR, - .nr = BFIN_UART_NR_PORTS, - .cons = BFIN_SERIAL_CONSOLE, -}; - -static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - return uart_suspend_port(&bfin_serial_reg, &uart->port); -} - -static int bfin_serial_resume(struct platform_device *pdev) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - return uart_resume_port(&bfin_serial_reg, &uart->port); -} - -static int bfin_serial_probe(struct platform_device *pdev) -{ - struct resource *res; - struct bfin_serial_port *uart = NULL; - int ret = 0; - - if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { - dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n"); - return -ENOENT; - } - - if (bfin_serial_ports[pdev->id] == NULL) { - - uart = kzalloc(sizeof(*uart), GFP_KERNEL); - if (!uart) { - dev_err(&pdev->dev, - "fail to malloc bfin_serial_port\n"); - return -ENOMEM; - } - bfin_serial_ports[pdev->id] = uart; - -#ifdef CONFIG_EARLY_PRINTK - if (!(bfin_earlyprintk_port.port.membase - && bfin_earlyprintk_port.port.line == pdev->id)) { - /* - * If the peripheral PINs of current port is allocated - * in earlyprintk probe stage, don't do it again. - */ -#endif - ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, - "fail to request bfin serial peripherals\n"); - goto out_error_free_mem; - } -#ifdef CONFIG_EARLY_PRINTK - } -#endif - - spin_lock_init(&uart->port.lock); - uart->port.uartclk = get_sclk(); - uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE; - uart->port.ops = &bfin_serial_pops; - uart->port.line = pdev->id; - uart->port.iotype = UPIO_MEM; - uart->port.flags = UPF_BOOT_AUTOCONF; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - uart->port.membase = ioremap(res->start, resource_size(res)); - if (!uart->port.membase) { - dev_err(&pdev->dev, "Cannot map uart IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - uart->port.mapbase = res->start; - - uart->port.irq = platform_get_irq(pdev, 0); - if (uart->port.irq < 0) { - dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - - uart->status_irq = platform_get_irq(pdev, 1); - if (uart->status_irq < 0) { - dev_err(&pdev->dev, "No uart status IRQ specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - -#ifdef CONFIG_SERIAL_BFIN_DMA - spin_lock_init(&uart->rx_lock); - uart->tx_done = 1; - uart->tx_count = 0; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 0); - if (res == NULL) { - dev_err(&pdev->dev, "No uart TX DMA channel specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->tx_dma_channel = res->start; - - res = platform_get_resource(pdev, IORESOURCE_DMA, 1); - if (res == NULL) { - dev_err(&pdev->dev, "No uart RX DMA channel specified\n"); - ret = -ENOENT; - goto out_error_unmap; - } - uart->rx_dma_channel = res->start; - - init_timer(&(uart->rx_dma_timer)); -#endif - -#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ - defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) - res = platform_get_resource(pdev, IORESOURCE_IO, 0); - if (res == NULL) - uart->cts_pin = -1; - else - uart->cts_pin = res->start; - - res = platform_get_resource(pdev, IORESOURCE_IO, 1); - if (res == NULL) - uart->rts_pin = -1; - else - uart->rts_pin = res->start; -# if defined(CONFIG_SERIAL_BFIN_CTSRTS) - if (uart->rts_pin >= 0) - gpio_request(uart->rts_pin, DRIVER_NAME); -# endif -#endif - } - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - if (!is_early_platform_device(pdev)) { -#endif - uart = bfin_serial_ports[pdev->id]; - uart->port.dev = &pdev->dev; - dev_set_drvdata(&pdev->dev, uart); - ret = uart_add_one_port(&bfin_serial_reg, &uart->port); -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - } -#endif - - if (!ret) - return 0; - - if (uart) { -out_error_unmap: - iounmap(uart->port.membase); -out_error_free_peripherals: - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); -out_error_free_mem: - kfree(uart); - bfin_serial_ports[pdev->id] = NULL; - } - - return ret; -} - -static int __devexit bfin_serial_remove(struct platform_device *pdev) -{ - struct bfin_serial_port *uart = platform_get_drvdata(pdev); - - dev_set_drvdata(&pdev->dev, NULL); - - if (uart) { - uart_remove_one_port(&bfin_serial_reg, &uart->port); -#ifdef CONFIG_SERIAL_BFIN_CTSRTS - if (uart->rts_pin >= 0) - gpio_free(uart->rts_pin); -#endif - iounmap(uart->port.membase); - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); - kfree(uart); - bfin_serial_ports[pdev->id] = NULL; - } - - return 0; -} - -static struct platform_driver bfin_serial_driver = { - .probe = bfin_serial_probe, - .remove = __devexit_p(bfin_serial_remove), - .suspend = bfin_serial_suspend, - .resume = bfin_serial_resume, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -#if defined(CONFIG_SERIAL_BFIN_CONSOLE) -static __initdata struct early_platform_driver early_bfin_serial_driver = { - .class_str = CLASS_BFIN_CONSOLE, - .pdrv = &bfin_serial_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -static int __init bfin_serial_rs_console_init(void) -{ - early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME); - - early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0); - - register_console(&bfin_serial_console); - - return 0; -} -console_initcall(bfin_serial_rs_console_init); -#endif - -#ifdef CONFIG_EARLY_PRINTK -/* - * Memory can't be allocated dynamically during earlyprink init stage. - * So, do individual probe for earlyprink with a static uart port variable. - */ -static int bfin_earlyprintk_probe(struct platform_device *pdev) -{ - struct resource *res; - int ret; - - if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { - dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n"); - return -ENOENT; - } - - ret = peripheral_request_list( - (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); - if (ret) { - dev_err(&pdev->dev, - "fail to request bfin serial peripherals\n"); - return ret; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res == NULL) { - dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); - ret = -ENOENT; - goto out_error_free_peripherals; - } - - bfin_earlyprintk_port.port.membase = ioremap(res->start, - resource_size(res)); - if (!bfin_earlyprintk_port.port.membase) { - dev_err(&pdev->dev, "Cannot map uart IO\n"); - ret = -ENXIO; - goto out_error_free_peripherals; - } - bfin_earlyprintk_port.port.mapbase = res->start; - bfin_earlyprintk_port.port.line = pdev->id; - bfin_earlyprintk_port.port.uartclk = get_sclk(); - bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE; - spin_lock_init(&bfin_earlyprintk_port.port.lock); - - return 0; - -out_error_free_peripherals: - peripheral_free_list( - (unsigned short *)pdev->dev.platform_data); - - return ret; -} - -static struct platform_driver bfin_earlyprintk_driver = { - .probe = bfin_earlyprintk_probe, - .driver = { - .name = DRIVER_NAME, - .owner = THIS_MODULE, - }, -}; - -static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = { - .class_str = CLASS_BFIN_EARLYPRINTK, - .pdrv = &bfin_earlyprintk_driver, - .requested_id = EARLY_PLATFORM_ID_UNSET, -}; - -struct console __init *bfin_earlyserial_init(unsigned int port, - unsigned int cflag) -{ - struct ktermios t; - char port_name[20]; - - if (port < 0 || port >= BFIN_UART_NR_PORTS) - return NULL; - - /* - * Only probe resource of the given port in earlyprintk boot arg. - * The expected port id should be indicated in port name string. - */ - snprintf(port_name, 20, DRIVER_NAME ".%d", port); - early_platform_driver_register(&early_bfin_earlyprintk_driver, - port_name); - early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0); - - if (!bfin_earlyprintk_port.port.membase) - return NULL; - -#ifdef CONFIG_SERIAL_BFIN_CONSOLE - /* - * If we are using early serial, don't let the normal console rewind - * log buffer, since that causes things to be printed multiple times - */ - bfin_serial_console.flags &= ~CON_PRINTBUFFER; -#endif - - bfin_early_serial_console.index = port; - t.c_cflag = cflag; - t.c_iflag = 0; - t.c_oflag = 0; - t.c_lflag = ICANON; - t.c_line = port; - bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t); - - return &bfin_early_serial_console; -} -#endif /* CONFIG_EARLY_PRINTK */ - -static int __init bfin_serial_init(void) -{ - int ret; - - pr_info("Blackfin serial driver\n"); - - ret = uart_register_driver(&bfin_serial_reg); - if (ret) { - pr_err("failed to register %s:%d\n", - bfin_serial_reg.driver_name, ret); - } - - ret = platform_driver_register(&bfin_serial_driver); - if (ret) { - pr_err("fail to register bfin uart\n"); - uart_unregister_driver(&bfin_serial_reg); - } - - return ret; -} - -static void __exit bfin_serial_exit(void) -{ - platform_driver_unregister(&bfin_serial_driver); - uart_unregister_driver(&bfin_serial_reg); -} - - -module_init(bfin_serial_init); -module_exit(bfin_serial_exit); - -MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); -MODULE_DESCRIPTION("Blackfin generic serial port driver"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); -MODULE_ALIAS("platform:bfin-uart"); diff --git a/drivers/tty/serial/bfin_uart.c b/drivers/tty/serial/bfin_uart.c new file mode 100644 index 000000000000..e08bc046c1bd --- /dev/null +++ b/drivers/tty/serial/bfin_uart.c @@ -0,0 +1,1603 @@ +/* + * Blackfin On-Chip Serial Driver + * + * Copyright 2006-2010 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) +#define SUPPORT_SYSRQ +#endif + +#define DRIVER_NAME "bfin-uart" +#define pr_fmt(fmt) DRIVER_NAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +#define port_membase(uart) (((struct bfin_serial_port *)(uart))->port.membase) +#define get_lsr_cache(uart) (((struct bfin_serial_port *)(uart))->lsr) +#define put_lsr_cache(uart, v) (((struct bfin_serial_port *)(uart))->lsr = (v)) +#include + +#ifdef CONFIG_SERIAL_BFIN_MODULE +# undef CONFIG_EARLY_PRINTK +#endif + +#ifdef CONFIG_SERIAL_BFIN_MODULE +# undef CONFIG_EARLY_PRINTK +#endif + +/* UART name and device definitions */ +#define BFIN_SERIAL_DEV_NAME "ttyBF" +#define BFIN_SERIAL_MAJOR 204 +#define BFIN_SERIAL_MINOR 64 + +static struct bfin_serial_port *bfin_serial_ports[BFIN_UART_NR_PORTS]; + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + +# ifndef CONFIG_SERIAL_BFIN_PIO +# error KGDB only support UART in PIO mode. +# endif + +static int kgdboc_port_line; +static int kgdboc_break_enabled; +#endif +/* + * Setup for console. Argument comes from the menuconfig + */ +#define DMA_RX_XCOUNT 512 +#define DMA_RX_YCOUNT (PAGE_SIZE / DMA_RX_XCOUNT) + +#define DMA_RX_FLUSH_JIFFIES (HZ / 50) + +#ifdef CONFIG_SERIAL_BFIN_DMA +static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart); +#else +static void bfin_serial_tx_chars(struct bfin_serial_port *uart); +#endif + +static void bfin_serial_reset_irda(struct uart_port *port); + +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) +static unsigned int bfin_serial_get_mctrl(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + if (uart->cts_pin < 0) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + + /* CTS PIN is negative assertive. */ + if (UART_GET_CTS(uart)) + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; + else + return TIOCM_DSR | TIOCM_CAR; +} + +static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + if (uart->rts_pin < 0) + return; + + /* RTS PIN is negative assertive. */ + if (mctrl & TIOCM_RTS) + UART_ENABLE_RTS(uart); + else + UART_DISABLE_RTS(uart); +} + +/* + * Handle any change of modem status signal. + */ +static irqreturn_t bfin_serial_mctrl_cts_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + unsigned int status; + + status = bfin_serial_get_mctrl(&uart->port); + uart_handle_cts_change(&uart->port, status & TIOCM_CTS); +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + uart->scts = 1; + UART_CLEAR_SCTS(uart); + UART_CLEAR_IER(uart, EDSSI); +#endif + + return IRQ_HANDLED; +} +#else +static unsigned int bfin_serial_get_mctrl(struct uart_port *port) +{ + return TIOCM_CTS | TIOCM_DSR | TIOCM_CAR; +} + +static void bfin_serial_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ +} +#endif + +/* + * interrupts are disabled on entry + */ +static void bfin_serial_stop_tx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; +#ifdef CONFIG_SERIAL_BFIN_DMA + struct circ_buf *xmit = &uart->port.state->xmit; +#endif + + while (!(UART_GET_LSR(uart) & TEMT)) + cpu_relax(); + +#ifdef CONFIG_SERIAL_BFIN_DMA + disable_dma(uart->tx_dma_channel); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + uart->tx_count = 0; + uart->tx_done = 1; +#else +#ifdef CONFIG_BF54x + /* Clear TFI bit */ + UART_PUT_LSR(uart, TFI); +#endif + UART_CLEAR_IER(uart, ETBEI); +#endif +} + +/* + * port is locked and interrupts are disabled + */ +static void bfin_serial_start_tx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + struct tty_struct *tty = uart->port.state->port.tty; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + + /* + * To avoid losting RX interrupt, we reset IR function + * before sending data. + */ + if (tty->termios->c_line == N_IRDA) + bfin_serial_reset_irda(port); + +#ifdef CONFIG_SERIAL_BFIN_DMA + if (uart->tx_done) + bfin_serial_dma_tx_chars(uart); +#else + UART_SET_IER(uart, ETBEI); + bfin_serial_tx_chars(uart); +#endif +} + +/* + * Interrupts are enabled + */ +static void bfin_serial_stop_rx(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + UART_CLEAR_IER(uart, ERBFI); +} + +/* + * Set the modem control timer to fire immediately. + */ +static void bfin_serial_enable_ms(struct uart_port *port) +{ +} + + +#if ANOMALY_05000363 && defined(CONFIG_SERIAL_BFIN_PIO) +# define UART_GET_ANOMALY_THRESHOLD(uart) ((uart)->anomaly_threshold) +# define UART_SET_ANOMALY_THRESHOLD(uart, v) ((uart)->anomaly_threshold = (v)) +#else +# define UART_GET_ANOMALY_THRESHOLD(uart) 0 +# define UART_SET_ANOMALY_THRESHOLD(uart, v) +#endif + +#ifdef CONFIG_SERIAL_BFIN_PIO +static void bfin_serial_rx_chars(struct bfin_serial_port *uart) +{ + struct tty_struct *tty = NULL; + unsigned int status, ch, flg; + static struct timeval anomaly_start = { .tv_sec = 0 }; + + status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + ch = UART_GET_CHAR(uart); + uart->port.icount.rx++; + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdb_connected && kgdboc_port_line == uart->port.line + && kgdboc_break_enabled) + if (ch == 0x3) {/* Ctrl + C */ + kgdb_breakpoint(); + return; + } + + if (!uart->port.state || !uart->port.state->port.tty) + return; +#endif + tty = uart->port.state->port.tty; + + if (ANOMALY_05000363) { + /* The BF533 (and BF561) family of processors have a nice anomaly + * where they continuously generate characters for a "single" break. + * We have to basically ignore this flood until the "next" valid + * character comes across. Due to the nature of the flood, it is + * not possible to reliably catch bytes that are sent too quickly + * after this break. So application code talking to the Blackfin + * which sends a break signal must allow at least 1.5 character + * times after the end of the break for things to stabilize. This + * timeout was picked as it must absolutely be larger than 1 + * character time +/- some percent. So 1.5 sounds good. All other + * Blackfin families operate properly. Woo. + */ + if (anomaly_start.tv_sec) { + struct timeval curr; + suseconds_t usecs; + + if ((~ch & (~ch + 1)) & 0xff) + goto known_good_char; + + do_gettimeofday(&curr); + if (curr.tv_sec - anomaly_start.tv_sec > 1) + goto known_good_char; + + usecs = 0; + if (curr.tv_sec != anomaly_start.tv_sec) + usecs += USEC_PER_SEC; + usecs += curr.tv_usec - anomaly_start.tv_usec; + + if (usecs > UART_GET_ANOMALY_THRESHOLD(uart)) + goto known_good_char; + + if (ch) + anomaly_start.tv_sec = 0; + else + anomaly_start = curr; + + return; + + known_good_char: + status &= ~BI; + anomaly_start.tv_sec = 0; + } + } + + if (status & BI) { + if (ANOMALY_05000363) + if (bfin_revid() < 5) + do_gettimeofday(&anomaly_start); + uart->port.icount.brk++; + if (uart_handle_break(&uart->port)) + goto ignore_char; + status &= ~(PE | FE); + } + if (status & PE) + uart->port.icount.parity++; + if (status & OE) + uart->port.icount.overrun++; + if (status & FE) + uart->port.icount.frame++; + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else + flg = TTY_NORMAL; + + if (uart_handle_sysrq_char(&uart->port, ch)) + goto ignore_char; + + uart_insert_char(&uart->port, status, OE, ch, flg); + + ignore_char: + tty_flip_buffer_push(tty); +} + +static void bfin_serial_tx_chars(struct bfin_serial_port *uart) +{ + struct circ_buf *xmit = &uart->port.state->xmit; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { +#ifdef CONFIG_BF54x + /* Clear TFI bit */ + UART_PUT_LSR(uart, TFI); +#endif + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ + UART_CLEAR_IER(uart, ETBEI); + return; + } + + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + + while ((UART_GET_LSR(uart) & THRE) && xmit->tail != xmit->head) { + UART_PUT_CHAR(uart, xmit->buf[xmit->tail]); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); +} + +static irqreturn_t bfin_serial_rx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + + while (UART_GET_LSR(uart) & DR) + bfin_serial_rx_chars(uart); + + return IRQ_HANDLED; +} + +static irqreturn_t bfin_serial_tx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port) & TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + spin_lock(&uart->port.lock); + if (UART_GET_LSR(uart) & THRE) + bfin_serial_tx_chars(uart); + spin_unlock(&uart->port.lock); + + return IRQ_HANDLED; +} +#endif + +#ifdef CONFIG_SERIAL_BFIN_DMA +static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) +{ + struct circ_buf *xmit = &uart->port.state->xmit; + + uart->tx_done = 0; + + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { + uart->tx_count = 0; + uart->tx_done = 1; + return; + } + + if (uart->port.x_char) { + UART_PUT_CHAR(uart, uart->port.x_char); + uart->port.icount.tx++; + uart->port.x_char = 0; + } + + uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); + if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) + uart->tx_count = UART_XMIT_SIZE - xmit->tail; + blackfin_dcache_flush_range((unsigned long)(xmit->buf+xmit->tail), + (unsigned long)(xmit->buf+xmit->tail+uart->tx_count)); + set_dma_config(uart->tx_dma_channel, + set_bfin_dma_config(DIR_READ, DMA_FLOW_STOP, + INTR_ON_BUF, + DIMENSION_LINEAR, + DATA_SIZE_8, + DMA_SYNC_RESTART)); + set_dma_start_addr(uart->tx_dma_channel, (unsigned long)(xmit->buf+xmit->tail)); + set_dma_x_count(uart->tx_dma_channel, uart->tx_count); + set_dma_x_modify(uart->tx_dma_channel, 1); + SSYNC(); + enable_dma(uart->tx_dma_channel); + + UART_SET_IER(uart, ETBEI); +} + +static void bfin_serial_dma_rx_chars(struct bfin_serial_port *uart) +{ + struct tty_struct *tty = uart->port.state->port.tty; + int i, flg, status; + + status = UART_GET_LSR(uart); + UART_CLEAR_LSR(uart); + + uart->port.icount.rx += + CIRC_CNT(uart->rx_dma_buf.head, uart->rx_dma_buf.tail, + UART_XMIT_SIZE); + + if (status & BI) { + uart->port.icount.brk++; + if (uart_handle_break(&uart->port)) + goto dma_ignore_char; + status &= ~(PE | FE); + } + if (status & PE) + uart->port.icount.parity++; + if (status & OE) + uart->port.icount.overrun++; + if (status & FE) + uart->port.icount.frame++; + + status &= uart->port.read_status_mask; + + if (status & BI) + flg = TTY_BREAK; + else if (status & PE) + flg = TTY_PARITY; + else if (status & FE) + flg = TTY_FRAME; + else + flg = TTY_NORMAL; + + for (i = uart->rx_dma_buf.tail; ; i++) { + if (i >= UART_XMIT_SIZE) + i = 0; + if (i == uart->rx_dma_buf.head) + break; + if (!uart_handle_sysrq_char(&uart->port, uart->rx_dma_buf.buf[i])) + uart_insert_char(&uart->port, status, OE, + uart->rx_dma_buf.buf[i], flg); + } + + dma_ignore_char: + tty_flip_buffer_push(tty); +} + +void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) +{ + int x_pos, pos; + + dma_disable_irq_nosync(uart->rx_dma_channel); + spin_lock_bh(&uart->rx_lock); + + /* 2D DMA RX buffer ring is used. Because curr_y_count and + * curr_x_count can't be read as an atomic operation, + * curr_y_count should be read before curr_x_count. When + * curr_x_count is read, curr_y_count may already indicate + * next buffer line. But, the position calculated here is + * still indicate the old line. The wrong position data may + * be smaller than current buffer tail, which cause garbages + * are received if it is not prohibit. + */ + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) + uart->rx_dma_nrows = 0; + x_pos = DMA_RX_XCOUNT - x_pos; + if (x_pos == DMA_RX_XCOUNT) + x_pos = 0; + + pos = uart->rx_dma_nrows * DMA_RX_XCOUNT + x_pos; + /* Ignore receiving data if new position is in the same line of + * current buffer tail and small. + */ + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; + } + + spin_unlock_bh(&uart->rx_lock); + dma_enable_irq(uart->rx_dma_channel); + + mod_timer(&(uart->rx_dma_timer), jiffies + DMA_RX_FLUSH_JIFFIES); +} + +static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + struct circ_buf *xmit = &uart->port.state->xmit; + +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->scts && !(bfin_serial_get_mctrl(&uart->port)&TIOCM_CTS)) { + uart->scts = 0; + uart_handle_cts_change(&uart->port, uart->scts); + } +#endif + + spin_lock(&uart->port.lock); + if (!(get_dma_curr_irqstat(uart->tx_dma_channel)&DMA_RUN)) { + disable_dma(uart->tx_dma_channel); + clear_dma_irqstat(uart->tx_dma_channel); + /* Anomaly notes: + * 05000215 - we always clear ETBEI within last UART TX + * interrupt to end a string. It is always set + * when start a new tx. + */ + UART_CLEAR_IER(uart, ETBEI); + xmit->tail = (xmit->tail + uart->tx_count) & (UART_XMIT_SIZE - 1); + uart->port.icount.tx += uart->tx_count; + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&uart->port); + + bfin_serial_dma_tx_chars(uart); + } + + spin_unlock(&uart->port.lock); + return IRQ_HANDLED; +} + +static irqreturn_t bfin_serial_dma_rx_int(int irq, void *dev_id) +{ + struct bfin_serial_port *uart = dev_id; + unsigned short irqstat; + int x_pos, pos; + + spin_lock(&uart->rx_lock); + irqstat = get_dma_curr_irqstat(uart->rx_dma_channel); + clear_dma_irqstat(uart->rx_dma_channel); + + uart->rx_dma_nrows = get_dma_curr_ycount(uart->rx_dma_channel); + x_pos = get_dma_curr_xcount(uart->rx_dma_channel); + uart->rx_dma_nrows = DMA_RX_YCOUNT - uart->rx_dma_nrows; + if (uart->rx_dma_nrows == DMA_RX_YCOUNT || x_pos == 0) + uart->rx_dma_nrows = 0; + + pos = uart->rx_dma_nrows * DMA_RX_XCOUNT; + if (pos > uart->rx_dma_buf.tail || + uart->rx_dma_nrows < (uart->rx_dma_buf.tail/DMA_RX_XCOUNT)) { + uart->rx_dma_buf.head = pos; + bfin_serial_dma_rx_chars(uart); + uart->rx_dma_buf.tail = uart->rx_dma_buf.head; + } + + spin_unlock(&uart->rx_lock); + + return IRQ_HANDLED; +} +#endif + +/* + * Return TIOCSER_TEMT when transmitter is not busy. + */ +static unsigned int bfin_serial_tx_empty(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short lsr; + + lsr = UART_GET_LSR(uart); + if (lsr & TEMT) + return TIOCSER_TEMT; + else + return 0; +} + +static void bfin_serial_break_ctl(struct uart_port *port, int break_state) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + u16 lcr = UART_GET_LCR(uart); + if (break_state) + lcr |= SB; + else + lcr &= ~SB; + UART_PUT_LCR(uart, lcr); + SSYNC(); +} + +static int bfin_serial_startup(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + +#ifdef CONFIG_SERIAL_BFIN_DMA + dma_addr_t dma_handle; + + if (request_dma(uart->rx_dma_channel, "BFIN_UART_RX") < 0) { + printk(KERN_NOTICE "Unable to attach Blackfin UART RX DMA channel\n"); + return -EBUSY; + } + + if (request_dma(uart->tx_dma_channel, "BFIN_UART_TX") < 0) { + printk(KERN_NOTICE "Unable to attach Blackfin UART TX DMA channel\n"); + free_dma(uart->rx_dma_channel); + return -EBUSY; + } + + set_dma_callback(uart->rx_dma_channel, bfin_serial_dma_rx_int, uart); + set_dma_callback(uart->tx_dma_channel, bfin_serial_dma_tx_int, uart); + + uart->rx_dma_buf.buf = (unsigned char *)dma_alloc_coherent(NULL, PAGE_SIZE, &dma_handle, GFP_DMA); + uart->rx_dma_buf.head = 0; + uart->rx_dma_buf.tail = 0; + uart->rx_dma_nrows = 0; + + set_dma_config(uart->rx_dma_channel, + set_bfin_dma_config(DIR_WRITE, DMA_FLOW_AUTO, + INTR_ON_ROW, DIMENSION_2D, + DATA_SIZE_8, + DMA_SYNC_RESTART)); + set_dma_x_count(uart->rx_dma_channel, DMA_RX_XCOUNT); + set_dma_x_modify(uart->rx_dma_channel, 1); + set_dma_y_count(uart->rx_dma_channel, DMA_RX_YCOUNT); + set_dma_y_modify(uart->rx_dma_channel, 1); + set_dma_start_addr(uart->rx_dma_channel, (unsigned long)uart->rx_dma_buf.buf); + enable_dma(uart->rx_dma_channel); + + uart->rx_dma_timer.data = (unsigned long)(uart); + uart->rx_dma_timer.function = (void *)bfin_serial_rx_dma_timeout; + uart->rx_dma_timer.expires = jiffies + DMA_RX_FLUSH_JIFFIES; + add_timer(&(uart->rx_dma_timer)); +#else +# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + if (kgdboc_port_line == uart->port.line && kgdboc_break_enabled) + kgdboc_break_enabled = 0; + else { +# endif + if (request_irq(uart->port.irq, bfin_serial_rx_int, IRQF_DISABLED, + "BFIN_UART_RX", uart)) { + printk(KERN_NOTICE "Unable to attach BlackFin UART RX interrupt\n"); + return -EBUSY; + } + + if (request_irq + (uart->port.irq+1, bfin_serial_tx_int, IRQF_DISABLED, + "BFIN_UART_TX", uart)) { + printk(KERN_NOTICE "Unable to attach BlackFin UART TX interrupt\n"); + free_irq(uart->port.irq, uart); + return -EBUSY; + } + +# ifdef CONFIG_BF54x + { + /* + * UART2 and UART3 on BF548 share interrupt PINs and DMA + * controllers with SPORT2 and SPORT3. UART rx and tx + * interrupts are generated in PIO mode only when configure + * their peripheral mapping registers properly, which means + * request corresponding DMA channels in PIO mode as well. + */ + unsigned uart_dma_ch_rx, uart_dma_ch_tx; + + switch (uart->port.irq) { + case IRQ_UART3_RX: + uart_dma_ch_rx = CH_UART3_RX; + uart_dma_ch_tx = CH_UART3_TX; + break; + case IRQ_UART2_RX: + uart_dma_ch_rx = CH_UART2_RX; + uart_dma_ch_tx = CH_UART2_TX; + break; + default: + uart_dma_ch_rx = uart_dma_ch_tx = 0; + break; + }; + + if (uart_dma_ch_rx && + request_dma(uart_dma_ch_rx, "BFIN_UART_RX") < 0) { + printk(KERN_NOTICE"Fail to attach UART interrupt\n"); + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq + 1, uart); + return -EBUSY; + } + if (uart_dma_ch_tx && + request_dma(uart_dma_ch_tx, "BFIN_UART_TX") < 0) { + printk(KERN_NOTICE "Fail to attach UART interrupt\n"); + free_dma(uart_dma_ch_rx); + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq + 1, uart); + return -EBUSY; + } + } +# endif +# if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + } +# endif +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) { + if (request_irq(gpio_to_irq(uart->cts_pin), + bfin_serial_mctrl_cts_int, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | + IRQF_DISABLED, "BFIN_UART_CTS", uart)) { + uart->cts_pin = -1; + pr_info("Unable to attach BlackFin UART CTS interrupt. So, disable it.\n"); + } + } + if (uart->rts_pin >= 0) + gpio_direction_output(uart->rts_pin, 0); +#endif +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->cts_pin >= 0 && request_irq(uart->status_irq, + bfin_serial_mctrl_cts_int, + IRQF_DISABLED, "BFIN_UART_MODEM_STATUS", uart)) { + uart->cts_pin = -1; + pr_info("Unable to attach BlackFin UART Modem Status interrupt.\n"); + } + + /* CTS RTS PINs are negative assertive. */ + UART_PUT_MCR(uart, ACTS); + UART_SET_IER(uart, EDSSI); +#endif + + UART_SET_IER(uart, ERBFI); + return 0; +} + +static void bfin_serial_shutdown(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + +#ifdef CONFIG_SERIAL_BFIN_DMA + disable_dma(uart->tx_dma_channel); + free_dma(uart->tx_dma_channel); + disable_dma(uart->rx_dma_channel); + free_dma(uart->rx_dma_channel); + del_timer(&(uart->rx_dma_timer)); + dma_free_coherent(NULL, PAGE_SIZE, uart->rx_dma_buf.buf, 0); +#else +#ifdef CONFIG_BF54x + switch (uart->port.irq) { + case IRQ_UART3_RX: + free_dma(CH_UART3_RX); + free_dma(CH_UART3_TX); + break; + case IRQ_UART2_RX: + free_dma(CH_UART2_RX); + free_dma(CH_UART2_TX); + break; + default: + break; + }; +#endif + free_irq(uart->port.irq, uart); + free_irq(uart->port.irq+1, uart); +#endif + +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->cts_pin >= 0) + free_irq(gpio_to_irq(uart->cts_pin), uart); +#endif +#ifdef CONFIG_SERIAL_BFIN_HARD_CTSRTS + if (uart->cts_pin >= 0) + free_irq(uart->status_irq, uart); +#endif +} + +static void +bfin_serial_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned long flags; + unsigned int baud, quot; + unsigned short val, ier, lcr = 0; + + switch (termios->c_cflag & CSIZE) { + case CS8: + lcr = WLS(8); + break; + case CS7: + lcr = WLS(7); + break; + case CS6: + lcr = WLS(6); + break; + case CS5: + lcr = WLS(5); + break; + default: + printk(KERN_ERR "%s: word lengh not supported\n", + __func__); + } + + /* Anomaly notes: + * 05000231 - STOP bit is always set to 1 whatever the user is set. + */ + if (termios->c_cflag & CSTOPB) { + if (ANOMALY_05000231) + printk(KERN_WARNING "STOP bits other than 1 is not " + "supported in case of anomaly 05000231.\n"); + else + lcr |= STB; + } + if (termios->c_cflag & PARENB) + lcr |= PEN; + if (!(termios->c_cflag & PARODD)) + lcr |= EPS; + if (termios->c_cflag & CMSPAR) + lcr |= STP; + + spin_lock_irqsave(&uart->port.lock, flags); + + port->read_status_mask = OE; + if (termios->c_iflag & INPCK) + port->read_status_mask |= (FE | PE); + if (termios->c_iflag & (BRKINT | PARMRK)) + port->read_status_mask |= BI; + + /* + * Characters to ignore + */ + port->ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= FE | PE; + if (termios->c_iflag & IGNBRK) { + port->ignore_status_mask |= BI; + /* + * If we're ignoring parity and break indicators, + * ignore overruns too (for real raw support). + */ + if (termios->c_iflag & IGNPAR) + port->ignore_status_mask |= OE; + } + + baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk/16); + quot = uart_get_divisor(port, baud); + + /* If discipline is not IRDA, apply ANOMALY_05000230 */ + if (termios->c_line != N_IRDA) + quot -= ANOMALY_05000230; + + UART_SET_ANOMALY_THRESHOLD(uart, USEC_PER_SEC / baud * 15); + + /* Disable UART */ + ier = UART_GET_IER(uart); + UART_DISABLE_INTS(uart); + + /* Set DLAB in LCR to Access DLL and DLH */ + UART_SET_DLAB(uart); + + UART_PUT_DLL(uart, quot & 0xFF); + UART_PUT_DLH(uart, (quot >> 8) & 0xFF); + SSYNC(); + + /* Clear DLAB in LCR to Access THR RBR IER */ + UART_CLEAR_DLAB(uart); + + UART_PUT_LCR(uart, lcr); + + /* Enable UART */ + UART_ENABLE_INTS(uart, ier); + + val = UART_GET_GCTL(uart); + val |= UCEN; + UART_PUT_GCTL(uart, val); + + /* Port speed changed, update the per-port timeout. */ + uart_update_timeout(port, termios->c_cflag, baud); + + spin_unlock_irqrestore(&uart->port.lock, flags); +} + +static const char *bfin_serial_type(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + return uart->port.type == PORT_BFIN ? "BFIN-UART" : NULL; +} + +/* + * Release the memory region(s) being used by 'port'. + */ +static void bfin_serial_release_port(struct uart_port *port) +{ +} + +/* + * Request the memory region(s) being used by 'port'. + */ +static int bfin_serial_request_port(struct uart_port *port) +{ + return 0; +} + +/* + * Configure/autoconfigure the port. + */ +static void bfin_serial_config_port(struct uart_port *port, int flags) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + if (flags & UART_CONFIG_TYPE && + bfin_serial_request_port(&uart->port) == 0) + uart->port.type = PORT_BFIN; +} + +/* + * Verify the new serial_struct (for TIOCSSERIAL). + * The only change we allow are to the flags and type, and + * even then only between PORT_BFIN and PORT_UNKNOWN + */ +static int +bfin_serial_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + return 0; +} + +/* + * Enable the IrDA function if tty->ldisc.num is N_IRDA. + * In other cases, disable IrDA function. + */ +static void bfin_serial_set_ldisc(struct uart_port *port, int ld) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short val; + + switch (ld) { + case N_IRDA: + val = UART_GET_GCTL(uart); + val |= (IREN | RPOLC); + UART_PUT_GCTL(uart, val); + break; + default: + val = UART_GET_GCTL(uart); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(uart, val); + } +} + +static void bfin_serial_reset_irda(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned short val; + + val = UART_GET_GCTL(uart); + val &= ~(IREN | RPOLC); + UART_PUT_GCTL(uart, val); + SSYNC(); + val |= (IREN | RPOLC); + UART_PUT_GCTL(uart, val); + SSYNC(); +} + +#ifdef CONFIG_CONSOLE_POLL +/* Anomaly notes: + * 05000099 - Because we only use THRE in poll_put and DR in poll_get, + * losing other bits of UART_LSR is not a problem here. + */ +static void bfin_serial_poll_put_char(struct uart_port *port, unsigned char chr) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + + while (!(UART_GET_LSR(uart) & THRE)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + UART_PUT_CHAR(uart, (unsigned char)chr); +} + +static int bfin_serial_poll_get_char(struct uart_port *port) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + unsigned char chr; + + while (!(UART_GET_LSR(uart) & DR)) + cpu_relax(); + + UART_CLEAR_DLAB(uart); + chr = UART_GET_CHAR(uart); + + return chr; +} +#endif + +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) +static void bfin_kgdboc_port_shutdown(struct uart_port *port) +{ + if (kgdboc_break_enabled) { + kgdboc_break_enabled = 0; + bfin_serial_shutdown(port); + } +} + +static int bfin_kgdboc_port_startup(struct uart_port *port) +{ + kgdboc_port_line = port->line; + kgdboc_break_enabled = !bfin_serial_startup(port); + return 0; +} +#endif + +static struct uart_ops bfin_serial_pops = { + .tx_empty = bfin_serial_tx_empty, + .set_mctrl = bfin_serial_set_mctrl, + .get_mctrl = bfin_serial_get_mctrl, + .stop_tx = bfin_serial_stop_tx, + .start_tx = bfin_serial_start_tx, + .stop_rx = bfin_serial_stop_rx, + .enable_ms = bfin_serial_enable_ms, + .break_ctl = bfin_serial_break_ctl, + .startup = bfin_serial_startup, + .shutdown = bfin_serial_shutdown, + .set_termios = bfin_serial_set_termios, + .set_ldisc = bfin_serial_set_ldisc, + .type = bfin_serial_type, + .release_port = bfin_serial_release_port, + .request_port = bfin_serial_request_port, + .config_port = bfin_serial_config_port, + .verify_port = bfin_serial_verify_port, +#if defined(CONFIG_KGDB_SERIAL_CONSOLE) || \ + defined(CONFIG_KGDB_SERIAL_CONSOLE_MODULE) + .kgdboc_port_startup = bfin_kgdboc_port_startup, + .kgdboc_port_shutdown = bfin_kgdboc_port_shutdown, +#endif +#ifdef CONFIG_CONSOLE_POLL + .poll_put_char = bfin_serial_poll_put_char, + .poll_get_char = bfin_serial_poll_get_char, +#endif +}; + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) || defined(CONFIG_EARLY_PRINTK) +/* + * If the port was already initialised (eg, by a boot loader), + * try to determine the current setup. + */ +static void __init +bfin_serial_console_get_options(struct bfin_serial_port *uart, int *baud, + int *parity, int *bits) +{ + unsigned short status; + + status = UART_GET_IER(uart) & (ERBFI | ETBEI); + if (status == (ERBFI | ETBEI)) { + /* ok, the port was enabled */ + u16 lcr, dlh, dll; + + lcr = UART_GET_LCR(uart); + + *parity = 'n'; + if (lcr & PEN) { + if (lcr & EPS) + *parity = 'e'; + else + *parity = 'o'; + } + switch (lcr & 0x03) { + case 0: + *bits = 5; + break; + case 1: + *bits = 6; + break; + case 2: + *bits = 7; + break; + case 3: + *bits = 8; + break; + } + /* Set DLAB in LCR to Access DLL and DLH */ + UART_SET_DLAB(uart); + + dll = UART_GET_DLL(uart); + dlh = UART_GET_DLH(uart); + + /* Clear DLAB in LCR to Access THR RBR IER */ + UART_CLEAR_DLAB(uart); + + *baud = get_sclk() / (16*(dll | dlh << 8)); + } + pr_debug("%s:baud = %d, parity = %c, bits= %d\n", __func__, *baud, *parity, *bits); +} + +static struct uart_driver bfin_serial_reg; + +static void bfin_serial_console_putchar(struct uart_port *port, int ch) +{ + struct bfin_serial_port *uart = (struct bfin_serial_port *)port; + while (!(UART_GET_LSR(uart) & THRE)) + barrier(); + UART_PUT_CHAR(uart, ch); +} + +#endif /* defined (CONFIG_SERIAL_BFIN_CONSOLE) || + defined (CONFIG_EARLY_PRINTK) */ + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE +#define CLASS_BFIN_CONSOLE "bfin-console" +/* + * Interrupts are disabled on entering + */ +static void +bfin_serial_console_write(struct console *co, const char *s, unsigned int count) +{ + struct bfin_serial_port *uart = bfin_serial_ports[co->index]; + unsigned long flags; + + spin_lock_irqsave(&uart->port.lock, flags); + uart_console_write(&uart->port, s, count, bfin_serial_console_putchar); + spin_unlock_irqrestore(&uart->port.lock, flags); + +} + +static int __init +bfin_serial_console_setup(struct console *co, char *options) +{ + struct bfin_serial_port *uart; + int baud = 57600; + int bits = 8; + int parity = 'n'; +# if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) + int flow = 'r'; +# else + int flow = 'n'; +# endif + + /* + * Check whether an invalid uart number has been specified, and + * if so, search for the first available port that does have + * console support. + */ + if (co->index < 0 || co->index >= BFIN_UART_NR_PORTS) + return -ENODEV; + + uart = bfin_serial_ports[co->index]; + if (!uart) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + else + bfin_serial_console_get_options(uart, &baud, &parity, &bits); + + return uart_set_options(&uart->port, co, baud, parity, bits, flow); +} + +static struct console bfin_serial_console = { + .name = BFIN_SERIAL_DEV_NAME, + .write = bfin_serial_console_write, + .device = uart_console_device, + .setup = bfin_serial_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bfin_serial_reg, +}; +#define BFIN_SERIAL_CONSOLE (&bfin_serial_console) +#else +#define BFIN_SERIAL_CONSOLE NULL +#endif /* CONFIG_SERIAL_BFIN_CONSOLE */ + +#ifdef CONFIG_EARLY_PRINTK +static struct bfin_serial_port bfin_earlyprintk_port; +#define CLASS_BFIN_EARLYPRINTK "bfin-earlyprintk" + +/* + * Interrupts are disabled on entering + */ +static void +bfin_earlyprintk_console_write(struct console *co, const char *s, unsigned int count) +{ + unsigned long flags; + + if (bfin_earlyprintk_port.port.line != co->index) + return; + + spin_lock_irqsave(&bfin_earlyprintk_port.port.lock, flags); + uart_console_write(&bfin_earlyprintk_port.port, s, count, + bfin_serial_console_putchar); + spin_unlock_irqrestore(&bfin_earlyprintk_port.port.lock, flags); +} + +/* + * This should have a .setup or .early_setup in it, but then things get called + * without the command line options, and the baud rate gets messed up - so + * don't let the common infrastructure play with things. (see calls to setup + * & earlysetup in ./kernel/printk.c:register_console() + */ +static struct __initdata console bfin_early_serial_console = { + .name = "early_BFuart", + .write = bfin_earlyprintk_console_write, + .device = uart_console_device, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &bfin_serial_reg, +}; +#endif + +static struct uart_driver bfin_serial_reg = { + .owner = THIS_MODULE, + .driver_name = DRIVER_NAME, + .dev_name = BFIN_SERIAL_DEV_NAME, + .major = BFIN_SERIAL_MAJOR, + .minor = BFIN_SERIAL_MINOR, + .nr = BFIN_UART_NR_PORTS, + .cons = BFIN_SERIAL_CONSOLE, +}; + +static int bfin_serial_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + return uart_suspend_port(&bfin_serial_reg, &uart->port); +} + +static int bfin_serial_resume(struct platform_device *pdev) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + return uart_resume_port(&bfin_serial_reg, &uart->port); +} + +static int bfin_serial_probe(struct platform_device *pdev) +{ + struct resource *res; + struct bfin_serial_port *uart = NULL; + int ret = 0; + + if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { + dev_err(&pdev->dev, "Wrong bfin uart platform device id.\n"); + return -ENOENT; + } + + if (bfin_serial_ports[pdev->id] == NULL) { + + uart = kzalloc(sizeof(*uart), GFP_KERNEL); + if (!uart) { + dev_err(&pdev->dev, + "fail to malloc bfin_serial_port\n"); + return -ENOMEM; + } + bfin_serial_ports[pdev->id] = uart; + +#ifdef CONFIG_EARLY_PRINTK + if (!(bfin_earlyprintk_port.port.membase + && bfin_earlyprintk_port.port.line == pdev->id)) { + /* + * If the peripheral PINs of current port is allocated + * in earlyprintk probe stage, don't do it again. + */ +#endif + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, + "fail to request bfin serial peripherals\n"); + goto out_error_free_mem; + } +#ifdef CONFIG_EARLY_PRINTK + } +#endif + + spin_lock_init(&uart->port.lock); + uart->port.uartclk = get_sclk(); + uart->port.fifosize = BFIN_UART_TX_FIFO_SIZE; + uart->port.ops = &bfin_serial_pops; + uart->port.line = pdev->id; + uart->port.iotype = UPIO_MEM; + uart->port.flags = UPF_BOOT_AUTOCONF; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + uart->port.membase = ioremap(res->start, resource_size(res)); + if (!uart->port.membase) { + dev_err(&pdev->dev, "Cannot map uart IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + uart->port.mapbase = res->start; + + uart->port.irq = platform_get_irq(pdev, 0); + if (uart->port.irq < 0) { + dev_err(&pdev->dev, "No uart RX/TX IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + + uart->status_irq = platform_get_irq(pdev, 1); + if (uart->status_irq < 0) { + dev_err(&pdev->dev, "No uart status IRQ specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + +#ifdef CONFIG_SERIAL_BFIN_DMA + spin_lock_init(&uart->rx_lock); + uart->tx_done = 1; + uart->tx_count = 0; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 0); + if (res == NULL) { + dev_err(&pdev->dev, "No uart TX DMA channel specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + uart->tx_dma_channel = res->start; + + res = platform_get_resource(pdev, IORESOURCE_DMA, 1); + if (res == NULL) { + dev_err(&pdev->dev, "No uart RX DMA channel specified\n"); + ret = -ENOENT; + goto out_error_unmap; + } + uart->rx_dma_channel = res->start; + + init_timer(&(uart->rx_dma_timer)); +#endif + +#if defined(CONFIG_SERIAL_BFIN_CTSRTS) || \ + defined(CONFIG_SERIAL_BFIN_HARD_CTSRTS) + res = platform_get_resource(pdev, IORESOURCE_IO, 0); + if (res == NULL) + uart->cts_pin = -1; + else + uart->cts_pin = res->start; + + res = platform_get_resource(pdev, IORESOURCE_IO, 1); + if (res == NULL) + uart->rts_pin = -1; + else + uart->rts_pin = res->start; +# if defined(CONFIG_SERIAL_BFIN_CTSRTS) + if (uart->rts_pin >= 0) + gpio_request(uart->rts_pin, DRIVER_NAME); +# endif +#endif + } + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + if (!is_early_platform_device(pdev)) { +#endif + uart = bfin_serial_ports[pdev->id]; + uart->port.dev = &pdev->dev; + dev_set_drvdata(&pdev->dev, uart); + ret = uart_add_one_port(&bfin_serial_reg, &uart->port); +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + } +#endif + + if (!ret) + return 0; + + if (uart) { +out_error_unmap: + iounmap(uart->port.membase); +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); +out_error_free_mem: + kfree(uart); + bfin_serial_ports[pdev->id] = NULL; + } + + return ret; +} + +static int __devexit bfin_serial_remove(struct platform_device *pdev) +{ + struct bfin_serial_port *uart = platform_get_drvdata(pdev); + + dev_set_drvdata(&pdev->dev, NULL); + + if (uart) { + uart_remove_one_port(&bfin_serial_reg, &uart->port); +#ifdef CONFIG_SERIAL_BFIN_CTSRTS + if (uart->rts_pin >= 0) + gpio_free(uart->rts_pin); +#endif + iounmap(uart->port.membase); + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + kfree(uart); + bfin_serial_ports[pdev->id] = NULL; + } + + return 0; +} + +static struct platform_driver bfin_serial_driver = { + .probe = bfin_serial_probe, + .remove = __devexit_p(bfin_serial_remove), + .suspend = bfin_serial_suspend, + .resume = bfin_serial_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +#if defined(CONFIG_SERIAL_BFIN_CONSOLE) +static __initdata struct early_platform_driver early_bfin_serial_driver = { + .class_str = CLASS_BFIN_CONSOLE, + .pdrv = &bfin_serial_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +static int __init bfin_serial_rs_console_init(void) +{ + early_platform_driver_register(&early_bfin_serial_driver, DRIVER_NAME); + + early_platform_driver_probe(CLASS_BFIN_CONSOLE, BFIN_UART_NR_PORTS, 0); + + register_console(&bfin_serial_console); + + return 0; +} +console_initcall(bfin_serial_rs_console_init); +#endif + +#ifdef CONFIG_EARLY_PRINTK +/* + * Memory can't be allocated dynamically during earlyprink init stage. + * So, do individual probe for earlyprink with a static uart port variable. + */ +static int bfin_earlyprintk_probe(struct platform_device *pdev) +{ + struct resource *res; + int ret; + + if (pdev->id < 0 || pdev->id >= BFIN_UART_NR_PORTS) { + dev_err(&pdev->dev, "Wrong earlyprintk platform device id.\n"); + return -ENOENT; + } + + ret = peripheral_request_list( + (unsigned short *)pdev->dev.platform_data, DRIVER_NAME); + if (ret) { + dev_err(&pdev->dev, + "fail to request bfin serial peripherals\n"); + return ret; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res == NULL) { + dev_err(&pdev->dev, "Cannot get IORESOURCE_MEM\n"); + ret = -ENOENT; + goto out_error_free_peripherals; + } + + bfin_earlyprintk_port.port.membase = ioremap(res->start, + resource_size(res)); + if (!bfin_earlyprintk_port.port.membase) { + dev_err(&pdev->dev, "Cannot map uart IO\n"); + ret = -ENXIO; + goto out_error_free_peripherals; + } + bfin_earlyprintk_port.port.mapbase = res->start; + bfin_earlyprintk_port.port.line = pdev->id; + bfin_earlyprintk_port.port.uartclk = get_sclk(); + bfin_earlyprintk_port.port.fifosize = BFIN_UART_TX_FIFO_SIZE; + spin_lock_init(&bfin_earlyprintk_port.port.lock); + + return 0; + +out_error_free_peripherals: + peripheral_free_list( + (unsigned short *)pdev->dev.platform_data); + + return ret; +} + +static struct platform_driver bfin_earlyprintk_driver = { + .probe = bfin_earlyprintk_probe, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static __initdata struct early_platform_driver early_bfin_earlyprintk_driver = { + .class_str = CLASS_BFIN_EARLYPRINTK, + .pdrv = &bfin_earlyprintk_driver, + .requested_id = EARLY_PLATFORM_ID_UNSET, +}; + +struct console __init *bfin_earlyserial_init(unsigned int port, + unsigned int cflag) +{ + struct ktermios t; + char port_name[20]; + + if (port < 0 || port >= BFIN_UART_NR_PORTS) + return NULL; + + /* + * Only probe resource of the given port in earlyprintk boot arg. + * The expected port id should be indicated in port name string. + */ + snprintf(port_name, 20, DRIVER_NAME ".%d", port); + early_platform_driver_register(&early_bfin_earlyprintk_driver, + port_name); + early_platform_driver_probe(CLASS_BFIN_EARLYPRINTK, 1, 0); + + if (!bfin_earlyprintk_port.port.membase) + return NULL; + +#ifdef CONFIG_SERIAL_BFIN_CONSOLE + /* + * If we are using early serial, don't let the normal console rewind + * log buffer, since that causes things to be printed multiple times + */ + bfin_serial_console.flags &= ~CON_PRINTBUFFER; +#endif + + bfin_early_serial_console.index = port; + t.c_cflag = cflag; + t.c_iflag = 0; + t.c_oflag = 0; + t.c_lflag = ICANON; + t.c_line = port; + bfin_serial_set_termios(&bfin_earlyprintk_port.port, &t, &t); + + return &bfin_early_serial_console; +} +#endif /* CONFIG_EARLY_PRINTK */ + +static int __init bfin_serial_init(void) +{ + int ret; + + pr_info("Blackfin serial driver\n"); + + ret = uart_register_driver(&bfin_serial_reg); + if (ret) { + pr_err("failed to register %s:%d\n", + bfin_serial_reg.driver_name, ret); + } + + ret = platform_driver_register(&bfin_serial_driver); + if (ret) { + pr_err("fail to register bfin uart\n"); + uart_unregister_driver(&bfin_serial_reg); + } + + return ret; +} + +static void __exit bfin_serial_exit(void) +{ + platform_driver_unregister(&bfin_serial_driver); + uart_unregister_driver(&bfin_serial_reg); +} + + +module_init(bfin_serial_init); +module_exit(bfin_serial_exit); + +MODULE_AUTHOR("Sonic Zhang, Aubrey Li"); +MODULE_DESCRIPTION("Blackfin generic serial port driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS_CHARDEV_MAJOR(BFIN_SERIAL_MAJOR); +MODULE_ALIAS("platform:bfin-uart");