From: Javier Martinez Canillas Date: Fri, 13 Nov 2015 04:54:02 +0000 (-0300) Subject: ARM: dts: omap3-beagle-xm: Use OMAP3_*_IOPAD pinmux macros X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0ba47e43064cbde72ec4c7dd4af1dd73ce6727fb;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git ARM: dts: omap3-beagle-xm: Use OMAP3_*_IOPAD pinmux macros Use the pinmux IOPAD macros to define the register absolute physical address instead of the offset from the padconf base address. This makes the DTS easier to read since matches the addresses listed in the Technical Reference Manual. Signed-off-by: Javier Martinez Canillas Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/boot/dts/omap3-beagle-xm.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts index 73f1e3a8f62c..5e0bf475051e 100644 --- a/arch/arm/boot/dts/omap3-beagle-xm.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -176,18 +176,18 @@ &omap3_pmx_wkup { gpio1_pins: pinmux_gpio1_pins { pinctrl-single,pins = < - 0x0e (PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ + OMAP3_WKUP_IOPAD(0x2a0e, PIN_INPUT | PIN_OFF_WAKEUPENABLE | MUX_MODE4) /* sys_boot2.gpio_4 */ >; }; dss_dpi_pins2: pinmux_dss_dpi_pins1 { pinctrl-single,pins = < - 0x0a (PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ - 0x0c (PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ - 0x10 (PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ - 0x12 (PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ - 0x14 (PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ - 0x16 (PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ + OMAP3_WKUP_IOPAD(0x2a0a, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */ + OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */ + OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */ + OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */ + OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */ + OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */ >; }; }; @@ -200,8 +200,8 @@ uart3_pins: pinmux_uart3_pins { pinctrl-single,pins = < - 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ - 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ + OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx_irrx.uart3_rx_irrx */ + OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx_irtx.uart3_tx_irtx OUTPUT | MODE0 */ >; };