From: Ander Conselvan de Oliveira Date: Tue, 21 Apr 2015 14:13:04 +0000 (+0300) Subject: drm/i915: Remove all *_pipes flags from modeset X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=0a9ab303b87a94115e361a7f3a15d9f481bc453b;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git drm/i915: Remove all *_pipes flags from modeset Set the mode_changed field on the crtc_states and use that instead. Note that even though this patch doesn't completely replace the logic in intel_modeset_affected_pipes(), that logic was never fully used to its full extent. Since the commit mentioned below, modeset_pipes and prepare_pipes would only contain at most the pipe for which the set_crtc ioctl was called. We can grow back that logic when the time comes. commit b6c5164d7bf624f3e1b750787ddb983150c5117c Author: Daniel Vetter Date: Fri Apr 12 18:48:43 2013 +0200 drm/i915: Fixup Oops in the pipe config computation v2: Don't set mode_changed unconditionally for modeset_crtc. (Ander) Check for needs_modeset() before trying to allocate a PLL. (Ander) Only call .crtc_enable() for pipes that were disabled. (Maarten) Signed-off-by: Ander Conselvan de Oliveira Reviewed-by: Maarten Lankhorst Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index aa445386b21f..62163d4e9b5f 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5752,13 +5752,13 @@ static int intel_mode_max_pixclk(struct drm_atomic_state *state) return max_pixclk; } -static int valleyview_modeset_global_pipes(struct drm_atomic_state *state, - unsigned *prepare_pipes) +static int valleyview_modeset_global_pipes(struct drm_atomic_state *state) { struct drm_i915_private *dev_priv = to_i915(state->dev); - struct intel_crtc *intel_crtc; + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; int max_pixclk = intel_mode_max_pixclk(state); - int cdclk; + int cdclk, i; if (max_pixclk < 0) return max_pixclk; @@ -5771,10 +5771,20 @@ static int valleyview_modeset_global_pipes(struct drm_atomic_state *state, if (cdclk == dev_priv->cdclk_freq) return 0; + /* add all active pipes to the state */ + for_each_crtc(state->dev, crtc) { + if (!crtc->state->enable) + continue; + + crtc_state = drm_atomic_get_crtc_state(state, crtc); + if (IS_ERR(crtc_state)) + return PTR_ERR(crtc_state); + } + /* disable/enable all currently active pipes while we change cdclk */ - for_each_intel_crtc(state->dev, intel_crtc) - if (intel_crtc->base.state->enable) - *prepare_pipes |= (1 << intel_crtc->pipe); + for_each_crtc_in_state(state, crtc, crtc_state, i) + if (crtc_state->enable) + crtc_state->mode_changed = true; return 0; } @@ -11522,94 +11532,6 @@ fail: return ret; } -/* Computes which crtcs are affected and sets the relevant bits in the mask. For - * simplicity we use the crtc's pipe number (because it's easier to obtain). */ -static void -intel_modeset_affected_pipes(struct drm_crtc *crtc, unsigned *modeset_pipes, - unsigned *prepare_pipes, unsigned *disable_pipes) -{ - struct intel_crtc *intel_crtc; - struct drm_device *dev = crtc->dev; - struct intel_encoder *encoder; - struct intel_connector *connector; - struct drm_crtc *tmp_crtc; - - *disable_pipes = *modeset_pipes = *prepare_pipes = 0; - - /* Check which crtcs have changed outputs connected to them, these need - * to be part of the prepare_pipes mask. We don't (yet) support global - * modeset across multiple crtcs, so modeset_pipes will only have one - * bit set at most. */ - for_each_intel_connector(dev, connector) { - if (connector->base.encoder == &connector->new_encoder->base) - continue; - - if (connector->base.encoder) { - tmp_crtc = connector->base.encoder->crtc; - - *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe; - } - - if (connector->new_encoder) - *prepare_pipes |= - 1 << connector->new_encoder->new_crtc->pipe; - } - - for_each_intel_encoder(dev, encoder) { - if (encoder->base.crtc == &encoder->new_crtc->base) - continue; - - if (encoder->base.crtc) { - tmp_crtc = encoder->base.crtc; - - *prepare_pipes |= 1 << to_intel_crtc(tmp_crtc)->pipe; - } - - if (encoder->new_crtc) - *prepare_pipes |= 1 << encoder->new_crtc->pipe; - } - - /* Check for pipes that will be enabled/disabled ... */ - for_each_intel_crtc(dev, intel_crtc) { - if (intel_crtc->base.state->enable == intel_crtc->new_enabled) - continue; - - if (!intel_crtc->new_enabled) - *disable_pipes |= 1 << intel_crtc->pipe; - else - *prepare_pipes |= 1 << intel_crtc->pipe; - } - - - /* set_mode is also used to update properties on life display pipes. */ - intel_crtc = to_intel_crtc(crtc); - if (intel_crtc->new_enabled) - *prepare_pipes |= 1 << intel_crtc->pipe; - - /* - * For simplicity do a full modeset on any pipe where the output routing - * changed. We could be more clever, but that would require us to be - * more careful with calling the relevant encoder->mode_set functions. - */ - if (*prepare_pipes) - *modeset_pipes = *prepare_pipes; - - /* ... and mask these out. */ - *modeset_pipes &= ~(*disable_pipes); - *prepare_pipes &= ~(*disable_pipes); - - /* - * HACK: We don't (yet) fully support global modesets. intel_set_config - * obies this rule, but the modeset restore mode of - * intel_modeset_setup_hw_state does not. - */ - *modeset_pipes &= 1 << intel_crtc->pipe; - *prepare_pipes &= 1 << intel_crtc->pipe; - - DRM_DEBUG_KMS("set mode pipe masks: modeset: %x, prepare: %x, disable: %x\n", - *modeset_pipes, *prepare_pipes, *disable_pipes); -} - static bool intel_crtc_in_use(struct drm_crtc *crtc) { struct drm_encoder *encoder; @@ -11622,13 +11544,22 @@ static bool intel_crtc_in_use(struct drm_crtc *crtc) return false; } +static bool +needs_modeset(struct drm_crtc_state *state) +{ + return state->mode_changed || state->active_changed; +} + static void -intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes) +intel_modeset_update_state(struct drm_atomic_state *state) { + struct drm_device *dev = state->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct intel_encoder *intel_encoder; - struct intel_crtc *intel_crtc; + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; struct drm_connector *connector; + int i; intel_shared_dpll_commit(dev_priv); @@ -11636,26 +11567,36 @@ intel_modeset_update_state(struct drm_device *dev, unsigned prepare_pipes) if (!intel_encoder->base.crtc) continue; - intel_crtc = to_intel_crtc(intel_encoder->base.crtc); + for_each_crtc_in_state(state, crtc, crtc_state, i) + if (crtc == intel_encoder->base.crtc) + break; - if (prepare_pipes & (1 << intel_crtc->pipe)) + if (crtc != intel_encoder->base.crtc) + continue; + + if (crtc_state->enable && needs_modeset(crtc_state)) intel_encoder->connectors_active = false; } intel_modeset_commit_output_state(dev); /* Double check state. */ - for_each_intel_crtc(dev, intel_crtc) { - WARN_ON(intel_crtc->base.state->enable != intel_crtc_in_use(&intel_crtc->base)); + for_each_crtc(dev, crtc) { + WARN_ON(crtc->state->enable != intel_crtc_in_use(crtc)); } list_for_each_entry(connector, &dev->mode_config.connector_list, head) { if (!connector->encoder || !connector->encoder->crtc) continue; - intel_crtc = to_intel_crtc(connector->encoder->crtc); + for_each_crtc_in_state(state, crtc, crtc_state, i) + if (crtc == connector->encoder->crtc) + break; + + if (crtc != connector->encoder->crtc) + continue; - if (prepare_pipes & (1 << intel_crtc->pipe)) { + if (crtc_state->enable && needs_modeset(crtc_state)) { struct drm_property *dpms_property = dev->mode_config.dpms_property; @@ -12192,13 +12133,28 @@ static void update_scanline_offset(struct intel_crtc *crtc) crtc->scanline_offset = 1; } +static void +intel_atomic_modeset_compute_changed_flags(struct drm_atomic_state *state, + struct drm_crtc *modeset_crtc) +{ + struct drm_crtc_state *crtc_state; + struct drm_crtc *crtc; + int i; + + for_each_crtc_in_state(state, crtc, crtc_state, i) { + if (crtc_state->enable != crtc->state->enable) + crtc_state->mode_changed = true; + + /* FIXME: Do we need to always set mode_changed for + * modeset_crtc if it is enabled? modeset_affect_pipes() + * did that. */ + } +} + static struct intel_crtc_state * intel_modeset_compute_config(struct drm_crtc *crtc, struct drm_display_mode *mode, - struct drm_atomic_state *state, - unsigned *modeset_pipes, - unsigned *prepare_pipes, - unsigned *disable_pipes) + struct drm_atomic_state *state) { struct intel_crtc_state *pipe_config; int ret = 0; @@ -12207,8 +12163,7 @@ intel_modeset_compute_config(struct drm_crtc *crtc, if (ret) return ERR_PTR(ret); - intel_modeset_affected_pipes(crtc, modeset_pipes, - prepare_pipes, disable_pipes); + intel_atomic_modeset_compute_changed_flags(state, crtc); /* * Note this needs changes when we start tracking multiple modes @@ -12232,33 +12187,41 @@ intel_modeset_compute_config(struct drm_crtc *crtc, return pipe_config; } -static int __intel_set_mode_setup_plls(struct drm_atomic_state *state, - unsigned modeset_pipes, - unsigned disable_pipes) +static int __intel_set_mode_setup_plls(struct drm_atomic_state *state) { struct drm_device *dev = state->dev; struct drm_i915_private *dev_priv = to_i915(dev); - unsigned clear_pipes = modeset_pipes | disable_pipes; + unsigned clear_pipes = 0; struct intel_crtc *intel_crtc; + struct intel_crtc_state *intel_crtc_state; + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; int ret = 0; + int i; if (!dev_priv->display.crtc_compute_clock) return 0; + for_each_crtc_in_state(state, crtc, crtc_state, i) { + intel_crtc = to_intel_crtc(crtc); + + if (needs_modeset(crtc_state)) + clear_pipes |= 1 << intel_crtc->pipe; + } + ret = intel_shared_dpll_start_config(dev_priv, clear_pipes); if (ret) goto done; - for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) { - struct intel_crtc_state *crtc_state = - intel_atomic_get_crtc_state(state, intel_crtc); - - /* Modeset pipes should have a new state by now */ - if (WARN_ON(IS_ERR(crtc_state))) + for_each_crtc_in_state(state, crtc, crtc_state, i) { + if (!needs_modeset(crtc_state) || !crtc_state->enable) continue; + intel_crtc = to_intel_crtc(crtc); + intel_crtc_state = to_intel_crtc_state(crtc_state); + ret = dev_priv->display.crtc_compute_clock(intel_crtc, - crtc_state); + intel_crtc_state); if (ret) { intel_shared_dpll_abort_config(dev_priv); goto done; @@ -12269,21 +12232,21 @@ done: return ret; } -static int __intel_set_mode(struct drm_crtc *crtc, +static int __intel_set_mode(struct drm_crtc *modeset_crtc, struct drm_display_mode *mode, int x, int y, struct drm_framebuffer *fb, - struct intel_crtc_state *pipe_config, - unsigned modeset_pipes, - unsigned prepare_pipes, - unsigned disable_pipes) + struct intel_crtc_state *pipe_config) { - struct drm_device *dev = crtc->dev; + struct drm_device *dev = modeset_crtc->dev; struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *saved_mode; struct drm_atomic_state *state = pipe_config->base.state; struct intel_crtc_state *crtc_state_copy = NULL; struct intel_crtc *intel_crtc; + struct drm_crtc *crtc; + struct drm_crtc_state *crtc_state; int ret = 0; + int i; saved_mode = kmalloc(sizeof(*saved_mode), GFP_KERNEL); if (!saved_mode) @@ -12295,7 +12258,7 @@ static int __intel_set_mode(struct drm_crtc *crtc, goto done; } - *saved_mode = crtc->mode; + *saved_mode = modeset_crtc->mode; /* * See if the config requires any additional preparation, e.g. @@ -12305,25 +12268,24 @@ static int __intel_set_mode(struct drm_crtc *crtc, * adjusted_mode bits in the crtc directly. */ if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) { - ret = valleyview_modeset_global_pipes(state, &prepare_pipes); + ret = valleyview_modeset_global_pipes(state); if (ret) goto done; - - /* may have added more to prepare_pipes than we should */ - prepare_pipes &= ~disable_pipes; } - ret = __intel_set_mode_setup_plls(state, modeset_pipes, disable_pipes); + ret = __intel_set_mode_setup_plls(state); if (ret) goto done; - for_each_intel_crtc_masked(dev, disable_pipes, intel_crtc) - intel_crtc_disable(&intel_crtc->base); + for_each_crtc_in_state(state, crtc, crtc_state, i) { + if (!needs_modeset(crtc_state)) + continue; - for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) { - if (intel_crtc->base.state->enable) { - intel_crtc_disable_planes(&intel_crtc->base); - dev_priv->display.crtc_disable(&intel_crtc->base); + if (!crtc_state->enable) { + intel_crtc_disable(crtc); + } else if (crtc->state->enable) { + intel_crtc_disable_planes(crtc); + dev_priv->display.crtc_disable(crtc); } } @@ -12334,32 +12296,36 @@ static int __intel_set_mode(struct drm_crtc *crtc, * pipes; here we assume a single modeset_pipe and only track the * single crtc and mode. */ - if (modeset_pipes) { - crtc->mode = *mode; + if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) { + modeset_crtc->mode = *mode; /* mode_set/enable/disable functions rely on a correct pipe * config. */ - intel_crtc_set_state(to_intel_crtc(crtc), pipe_config); + intel_crtc_set_state(to_intel_crtc(modeset_crtc), pipe_config); /* * Calculate and store various constants which * are later needed by vblank and swap-completion * timestamping. They are derived from true hwmode. */ - drm_calc_timestamping_constants(crtc, + drm_calc_timestamping_constants(modeset_crtc, &pipe_config->base.adjusted_mode); } /* Only after disabling all output pipelines that will be changed can we * update the the output configuration. */ - intel_modeset_update_state(dev, prepare_pipes); + intel_modeset_update_state(state); modeset_update_crtc_power_domains(state); - for_each_intel_crtc_masked(dev, modeset_pipes, intel_crtc) { - struct drm_plane *primary = intel_crtc->base.primary; + if (pipe_config->base.enable && needs_modeset(&pipe_config->base)) { + struct drm_plane *primary; int vdisplay, hdisplay; + intel_crtc = to_intel_crtc(modeset_crtc); + primary = intel_crtc->base.primary; + drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay); + ret = drm_plane_helper_update(primary, &intel_crtc->base, fb, 0, 0, hdisplay, vdisplay, @@ -12368,20 +12334,23 @@ static int __intel_set_mode(struct drm_crtc *crtc, } /* Now enable the clocks, plane, pipe, and connectors that we set up. */ - for_each_intel_crtc_masked(dev, prepare_pipes, intel_crtc) { - update_scanline_offset(intel_crtc); + for_each_crtc_in_state(state, crtc, crtc_state, i) { + if (!needs_modeset(crtc_state) || !crtc_state->enable) + continue; + + update_scanline_offset(to_intel_crtc(crtc)); - dev_priv->display.crtc_enable(&intel_crtc->base); - intel_crtc_enable_planes(&intel_crtc->base); + dev_priv->display.crtc_enable(crtc); + intel_crtc_enable_planes(crtc); } /* FIXME: add subpixel order */ done: - if (ret && crtc->state->enable) - crtc->mode = *saved_mode; + if (ret && modeset_crtc->state->enable) + modeset_crtc->mode = *saved_mode; if (ret == 0 && pipe_config) { - struct intel_crtc *intel_crtc = to_intel_crtc(crtc); + struct intel_crtc *intel_crtc = to_intel_crtc(modeset_crtc); /* The pipe_config will be freed with the atomic state, so * make a copy. */ @@ -12397,18 +12366,14 @@ done: return ret; } -static int intel_set_mode_pipes(struct drm_crtc *crtc, - struct drm_display_mode *mode, - int x, int y, struct drm_framebuffer *fb, - struct intel_crtc_state *pipe_config, - unsigned modeset_pipes, - unsigned prepare_pipes, - unsigned disable_pipes) +static int intel_set_mode_with_config(struct drm_crtc *crtc, + struct drm_display_mode *mode, + int x, int y, struct drm_framebuffer *fb, + struct intel_crtc_state *pipe_config) { int ret; - ret = __intel_set_mode(crtc, mode, x, y, fb, pipe_config, modeset_pipes, - prepare_pipes, disable_pipes); + ret = __intel_set_mode(crtc, mode, x, y, fb, pipe_config); if (ret == 0) intel_modeset_check_state(crtc->dev); @@ -12422,22 +12387,15 @@ static int intel_set_mode(struct drm_crtc *crtc, struct drm_atomic_state *state) { struct intel_crtc_state *pipe_config; - unsigned modeset_pipes, prepare_pipes, disable_pipes; int ret = 0; - pipe_config = intel_modeset_compute_config(crtc, mode, state, - &modeset_pipes, - &prepare_pipes, - &disable_pipes); - + pipe_config = intel_modeset_compute_config(crtc, mode, state); if (IS_ERR(pipe_config)) { ret = PTR_ERR(pipe_config); goto out; } - ret = intel_set_mode_pipes(crtc, mode, x, y, fb, pipe_config, - modeset_pipes, prepare_pipes, - disable_pipes); + ret = intel_set_mode_with_config(crtc, mode, x, y, fb, pipe_config); if (ret) goto out; @@ -12863,7 +12821,6 @@ static int intel_crtc_set_config(struct drm_mode_set *set) struct drm_atomic_state *state = NULL; struct intel_set_config *config; struct intel_crtc_state *pipe_config; - unsigned modeset_pipes, prepare_pipes, disable_pipes; int ret; BUG_ON(!set); @@ -12918,10 +12875,7 @@ static int intel_crtc_set_config(struct drm_mode_set *set) intel_set_config_compute_mode_changes(set, config); pipe_config = intel_modeset_compute_config(set->crtc, set->mode, - state, - &modeset_pipes, - &prepare_pipes, - &disable_pipes); + state); if (IS_ERR(pipe_config)) { ret = PTR_ERR(pipe_config); goto fail; @@ -12941,10 +12895,9 @@ static int intel_crtc_set_config(struct drm_mode_set *set) intel_update_pipe_size(to_intel_crtc(set->crtc)); if (config->mode_changed) { - ret = intel_set_mode_pipes(set->crtc, set->mode, - set->x, set->y, set->fb, pipe_config, - modeset_pipes, prepare_pipes, - disable_pipes); + ret = intel_set_mode_with_config(set->crtc, set->mode, + set->x, set->y, set->fb, + pipe_config); } else if (config->fb_changed) { struct intel_crtc *intel_crtc = to_intel_crtc(set->crtc); struct drm_plane *primary = set->crtc->primary;