From: Yotam Gigi Date: Tue, 5 Jul 2016 09:27:48 +0000 (+0200) Subject: mlxsw: reg: Add Router Adjacency Table register X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=089f981683f87a299f8a3b81696629ae1c7b1abb;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git mlxsw: reg: Add Router Adjacency Table register The RATR register is used to configure the Router Adjacency (next-hop) Table. Signed-off-by: Yotam Gigi Signed-off-by: Jiri Pirko Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/mellanox/mlxsw/reg.h b/drivers/net/ethernet/mellanox/mlxsw/reg.h index fcf379b5984c..a2d7870ea60e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/reg.h +++ b/drivers/net/ethernet/mellanox/mlxsw/reg.h @@ -3455,6 +3455,137 @@ static inline void mlxsw_reg_ritr_pack(char *payload, bool enable, mlxsw_reg_ritr_if_mac_memcpy_to(payload, mac); } +/* RATR - Router Adjacency Table Register + * -------------------------------------- + * The RATR register is used to configure the Router Adjacency (next-hop) + * Table. + */ +#define MLXSW_REG_RATR_ID 0x8008 +#define MLXSW_REG_RATR_LEN 0x2C + +static const struct mlxsw_reg_info mlxsw_reg_ratr = { + .id = MLXSW_REG_RATR_ID, + .len = MLXSW_REG_RATR_LEN, +}; + +enum mlxsw_reg_ratr_op { + /* Read */ + MLXSW_REG_RATR_OP_QUERY_READ = 0, + /* Read and clear activity */ + MLXSW_REG_RATR_OP_QUERY_READ_CLEAR = 2, + /* Write Adjacency entry */ + MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY = 1, + /* Write Adjacency entry only if the activity is cleared. + * The write may not succeed if the activity is set. There is not + * direct feedback if the write has succeeded or not, however + * the get will reveal the actual entry (SW can compare the get + * response to the set command). + */ + MLXSW_REG_RATR_OP_WRITE_WRITE_ENTRY_ON_ACTIVITY = 3, +}; + +/* reg_ratr_op + * Note that Write operation may also be used for updating + * counter_set_type and counter_index. In this case all other + * fields must not be updated. + * Access: OP + */ +MLXSW_ITEM32(reg, ratr, op, 0x00, 28, 4); + +/* reg_ratr_v + * Valid bit. Indicates if the adjacency entry is valid. + * Note: the device may need some time before reusing an invalidated + * entry. During this time the entry can not be reused. It is + * recommended to use another entry before reusing an invalidated + * entry (e.g. software can put it at the end of the list for + * reusing). Trying to access an invalidated entry not yet cleared + * by the device results with failure indicating "Try Again" status. + * When valid is '0' then egress_router_interface,trap_action, + * adjacency_parameters and counters are reserved + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, v, 0x00, 24, 1); + +/* reg_ratr_a + * Activity. Set for new entries. Set if a packet lookup has hit on + * the specific entry. To clear the a bit, use "clear activity". + * Access: RO + */ +MLXSW_ITEM32(reg, ratr, a, 0x00, 16, 1); + +/* reg_ratr_adjacency_index_low + * Bits 15:0 of index into the adjacency table. + * For SwitchX and SwitchX-2, the adjacency table is linear and + * used for adjacency entries only. + * For Spectrum, the index is to the KVD linear. + * Access: Index + */ +MLXSW_ITEM32(reg, ratr, adjacency_index_low, 0x04, 0, 16); + +/* reg_ratr_egress_router_interface + * Range is 0 .. cap_max_router_interfaces - 1 + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, egress_router_interface, 0x08, 0, 16); + +enum mlxsw_reg_ratr_trap_action { + MLXSW_REG_RATR_TRAP_ACTION_NOP, + MLXSW_REG_RATR_TRAP_ACTION_TRAP, + MLXSW_REG_RATR_TRAP_ACTION_MIRROR_TO_CPU, + MLXSW_REG_RATR_TRAP_ACTION_MIRROR, + MLXSW_REG_RATR_TRAP_ACTION_DISCARD_ERRORS, +}; + +/* reg_ratr_trap_action + * see mlxsw_reg_ratr_trap_action + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, trap_action, 0x0C, 28, 4); + +enum mlxsw_reg_ratr_trap_id { + MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS0 = 0, + MLXSW_REG_RATR_TRAP_ID_RTR_EGRESS1 = 1, +}; + +/* reg_ratr_adjacency_index_high + * Bits 23:16 of the adjacency_index. + * Access: Index + */ +MLXSW_ITEM32(reg, ratr, adjacency_index_high, 0x0C, 16, 8); + +/* reg_ratr_trap_id + * Trap ID to be reported to CPU. + * Trap-ID is RTR_EGRESS0 or RTR_EGRESS1. + * For trap_action of NOP, MIRROR and DISCARD_ERROR + * Access: RW + */ +MLXSW_ITEM32(reg, ratr, trap_id, 0x0C, 0, 8); + +/* reg_ratr_eth_destination_mac + * MAC address of the destination next-hop. + * Access: RW + */ +MLXSW_ITEM_BUF(reg, ratr, eth_destination_mac, 0x12, 6); + +static inline void +mlxsw_reg_ratr_pack(char *payload, + enum mlxsw_reg_ratr_op op, bool valid, + u32 adjacency_index, u16 egress_rif) +{ + MLXSW_REG_ZERO(ratr, payload); + mlxsw_reg_ratr_op_set(payload, op); + mlxsw_reg_ratr_v_set(payload, valid); + mlxsw_reg_ratr_adjacency_index_low_set(payload, adjacency_index); + mlxsw_reg_ratr_adjacency_index_high_set(payload, adjacency_index >> 16); + mlxsw_reg_ratr_egress_router_interface_set(payload, egress_rif); +} + +static inline void mlxsw_reg_ratr_eth_entry_pack(char *payload, + const char *dest_mac) +{ + mlxsw_reg_ratr_eth_destination_mac_memcpy_to(payload, dest_mac); +} + /* RALTA - Router Algorithmic LPM Tree Allocation Register * ------------------------------------------------------- * RALTA is used to allocate the LPM trees of the SHSPM method. @@ -4910,6 +5041,8 @@ static inline const char *mlxsw_reg_id_str(u16 reg_id) return "RGCR"; case MLXSW_REG_RITR_ID: return "RITR"; + case MLXSW_REG_RATR_ID: + return "RATR"; case MLXSW_REG_RALTA_ID: return "RALTA"; case MLXSW_REG_RALST_ID: