From: Colin Leroy Date: Sun, 1 May 2005 15:58:43 +0000 (-0700) Subject: [PATCH] pmac: save master volume on sleep X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=085e6fc96bcf239cab8adc600aab2452d75590b1;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git [PATCH] pmac: save master volume on sleep Ben's patch that shutdowns master switch and restores it after resume ("pmac: Improve sleep code of tumbler driver") isn't enough here on an iBook (snapper chip). The master switch is correctly saved and restored, but somehow tumbler_put_master_volume() gets called just after tumbler_set_master_volume() and sets mix->master_vol[*] to 0. So, on resuming, the master switch is reenabled, but the volume is set to 0. Here's a patch that also saves and restores master_vol. Signed-off-by: Colin Leroy Cc: Benjamin Herrenschmidt Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- diff --git a/sound/ppc/tumbler.c b/sound/ppc/tumbler.c index f3e010793a6a..9332237cb6a4 100644 --- a/sound/ppc/tumbler.c +++ b/sound/ppc/tumbler.c @@ -99,6 +99,7 @@ typedef struct pmac_tumbler_t { pmac_gpio_t hp_detect; int headphone_irq; int lineout_irq; + unsigned int save_master_vol[2]; unsigned int master_vol[2]; unsigned int save_master_switch[2]; unsigned int master_switch[2]; @@ -1139,6 +1140,8 @@ static void tumbler_suspend(pmac_t *chip) disable_irq(mix->lineout_irq); mix->save_master_switch[0] = mix->master_switch[0]; mix->save_master_switch[1] = mix->master_switch[1]; + mix->save_master_vol[0] = mix->master_vol[0]; + mix->save_master_vol[1] = mix->master_vol[1]; mix->master_switch[0] = mix->master_switch[1] = 0; tumbler_set_master_volume(mix); if (!mix->anded_reset) { @@ -1166,6 +1169,8 @@ static void tumbler_resume(pmac_t *chip) mix->acs &= ~1; mix->master_switch[0] = mix->save_master_switch[0]; mix->master_switch[1] = mix->save_master_switch[1]; + mix->master_vol[0] = mix->save_master_vol[0]; + mix->master_vol[1] = mix->save_master_vol[1]; tumbler_reset_audio(chip); if (mix->i2c.client && mix->i2c.init_client) { if (mix->i2c.init_client(&mix->i2c) < 0)