From: Emil Tantilov Date: Wed, 19 Dec 2012 07:14:17 +0000 (+0000) Subject: ixgbe: allow reading of SFF-8472 data over i2c X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=07ce870bed2f631ad53a2c1a90db20b5f8126ab9;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git ixgbe: allow reading of SFF-8472 data over i2c This patch adds functions needed for reading SFF-8472 diagnostic data from SFP modules. Based on original patch from Aurélien Guillaume CC: Aurélien Guillaume Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c index 7fd3833c7ecf..6030de50c4cd 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82598.c @@ -1003,15 +1003,16 @@ static s32 ixgbe_write_analog_reg8_82598(struct ixgbe_hw *hw, u32 reg, u8 val) } /** - * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * ixgbe_read_i2c_phy_82598 - Reads 8 bit word over I2C interface. * @hw: pointer to hardware structure - * @byte_offset: EEPROM byte offset to read + * @dev_addr: address to read from + * @byte_offset: byte offset to read from dev_addr * @eeprom_data: value read * - * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + * Performs 8 byte read operation to SFP module's data over I2C interface. **/ -static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, - u8 *eeprom_data) +static s32 ixgbe_read_i2c_phy_82598(struct ixgbe_hw *hw, u8 dev_addr, + u8 byte_offset, u8 *eeprom_data) { s32 status = 0; u16 sfp_addr = 0; @@ -1025,7 +1026,7 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, * 0xC30D. These registers are used to talk to the SFP+ * module's EEPROM through the SDA/SCL (I2C) interface. */ - sfp_addr = (IXGBE_I2C_EEPROM_DEV_ADDR << 8) + byte_offset; + sfp_addr = (dev_addr << 8) + byte_offset; sfp_addr = (sfp_addr | IXGBE_I2C_EEPROM_READ_MASK); hw->phy.ops.write_reg(hw, IXGBE_MDIO_PMA_PMD_SDA_SCL_ADDR, @@ -1057,13 +1058,42 @@ static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, *eeprom_data = (u8)(sfp_data >> 8); } else { status = IXGBE_ERR_PHY; - goto out; } out: return status; } +/** + * ixgbe_read_i2c_eeprom_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: EEPROM byte offset to read + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's EEPROM over I2C interface. + **/ +static s32 ixgbe_read_i2c_eeprom_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *eeprom_data) +{ + return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR, + byte_offset, eeprom_data); +} + +/** + * ixgbe_read_i2c_sff8472_82598 - Reads 8 bit word over I2C interface. + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @eeprom_data: value read + * + * Performs 8 byte read operation to SFP module's SFF-8472 data over I2C + **/ +static s32 ixgbe_read_i2c_sff8472_82598(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data) +{ + return ixgbe_read_i2c_phy_82598(hw, IXGBE_I2C_EEPROM_DEV_ADDR2, + byte_offset, sff8472_data); +} + /** * ixgbe_get_supported_physical_layer_82598 - Returns physical layer type * @hw: pointer to hardware structure @@ -1297,6 +1327,7 @@ static struct ixgbe_phy_operations phy_ops_82598 = { .write_reg = &ixgbe_write_phy_reg_generic, .setup_link = &ixgbe_setup_phy_link_generic, .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_82598, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_82598, .check_overtemp = &ixgbe_tn_check_overtemp, }; diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 335046175950..d1f4d4523ecd 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -2241,6 +2241,7 @@ static struct ixgbe_phy_operations phy_ops_82599 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_byte = &ixgbe_read_i2c_byte_generic, .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp, diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c index f4b2c0d662dd..d034cc55da30 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.c @@ -1203,6 +1203,22 @@ s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, eeprom_data); } +/** + * ixgbe_read_i2c_sff8472_generic - Reads 8 bit word over I2C interface + * @hw: pointer to hardware structure + * @byte_offset: byte offset at address 0xA2 + * @eeprom_data: value read + * + * Performs byte read operation to SFP module's SFF-8472 data over I2C + **/ +s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data) +{ + return hw->phy.ops.read_i2c_byte(hw, byte_offset, + IXGBE_I2C_EEPROM_DEV_ADDR2, + sff8472_data); +} + /** * ixgbe_write_i2c_eeprom_generic - Writes 8 bit EEPROM word over I2C interface * @hw: pointer to hardware structure diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 51b0a91f62bc..bbfe55c1054a 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -30,6 +30,7 @@ #include "ixgbe_type.h" #define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0 +#define IXGBE_I2C_EEPROM_DEV_ADDR2 0xA2 /* EEPROM byte offsets */ #define IXGBE_SFF_IDENTIFIER 0x0 @@ -41,6 +42,8 @@ #define IXGBE_SFF_10GBE_COMP_CODES 0x3 #define IXGBE_SFF_CABLE_TECHNOLOGY 0x8 #define IXGBE_SFF_CABLE_SPEC_COMP 0x3C +#define IXGBE_SFF_SFF_8472_SWAP 0x5C +#define IXGBE_SFF_SFF_8472_COMP 0x5E /* Bitmasks */ #define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 @@ -51,6 +54,7 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_ADDRESSING_MODE 0x4 #define IXGBE_I2C_EEPROM_READ_MASK 0x100 #define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 #define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0 @@ -88,6 +92,9 @@ #define IXGBE_TN_LASI_STATUS_REG 0x9005 #define IXGBE_TN_LASI_STATUS_TEMP_ALARM 0x0008 +/* SFP+ SFF-8472 Compliance code */ +#define IXGBE_SFF_SFF_8472_UNSUP 0x00 + s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw); s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw); s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw); @@ -125,6 +132,8 @@ s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 dev_addr, u8 data); s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 *eeprom_data); +s32 ixgbe_read_i2c_sff8472_generic(struct ixgbe_hw *hw, u8 byte_offset, + u8 *sff8472_data); s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset, u8 eeprom_data); #endif /* _IXGBE_PHY_H_ */ diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 0bdcc88cbf50..1af6289c1bb1 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2874,6 +2874,7 @@ struct ixgbe_phy_operations { s32 (*get_firmware_version)(struct ixgbe_hw *, u16 *); s32 (*read_i2c_byte)(struct ixgbe_hw *, u8, u8, u8 *); s32 (*write_i2c_byte)(struct ixgbe_hw *, u8, u8, u8); + s32 (*read_i2c_sff8472)(struct ixgbe_hw *, u8 , u8 *); s32 (*read_i2c_eeprom)(struct ixgbe_hw *, u8 , u8 *); s32 (*write_i2c_eeprom)(struct ixgbe_hw *, u8, u8); s32 (*check_overtemp)(struct ixgbe_hw *); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c index 2fa58437a42f..4dc3725480fe 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x540.c @@ -878,6 +878,7 @@ static struct ixgbe_phy_operations phy_ops_X540 = { .setup_link_speed = &ixgbe_setup_phy_link_speed_generic, .read_i2c_byte = &ixgbe_read_i2c_byte_generic, .write_i2c_byte = &ixgbe_write_i2c_byte_generic, + .read_i2c_sff8472 = &ixgbe_read_i2c_sff8472_generic, .read_i2c_eeprom = &ixgbe_read_i2c_eeprom_generic, .write_i2c_eeprom = &ixgbe_write_i2c_eeprom_generic, .check_overtemp = &ixgbe_tn_check_overtemp,