From: Chon Ming Lee Date: Wed, 9 Apr 2014 10:28:17 +0000 (+0300) Subject: drm/i915/chv: Trigger phy common lane reset X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=076ed3b2955e5934e137abff39fe9e7180f236fe;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git drm/i915/chv: Trigger phy common lane reset During cold boot, the display controller needs to deassert the common lane reset. Only do it once during intel_init_dpio for both PHYx2 and PHYx1. Besides, assert the common lane reset when disable pll. This still to be determined whether need to do it by driver. Signed-off-by: Chon Ming Lee [vsyrjala: Don't disable DPIO PLL when using DSI] [vsyrjala: Don't call vlv_disable_pll() by accident on CHV] Signed-off-by: Ville Syrjälä Reviewed-by: Imre Deak [danvet: Move part of a moved comment back as suggested by Imre since it's valid for both byt and chv.] Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 17e139e9cbbc..921b48fbf571 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1423,6 +1423,14 @@ enum punit_power_well { /* Additional CHV pll/phy registers */ #define DPIO_PHY_STATUS (VLV_DISPLAY_BASE + 0x6240) #define DPLL_PORTD_READY_MASK (0xf) +#define DISPLAY_PHY_CONTROL (VLV_DISPLAY_BASE + 0x60100) +#define PHY_COM_LANE_RESET_DEASSERT(phy, val) \ + ((phy == DPIO_PHY0) ? (val | 1) : (val | 2)) +#define PHY_COM_LANE_RESET_ASSERT(phy, val) \ + ((phy == DPIO_PHY0) ? (val & ~1) : (val & ~2)) +#define DISPLAY_PHY_STATUS (VLV_DISPLAY_BASE + 0x60104) +#define PHY_POWERGOOD(phy) ((phy == DPIO_PHY0) ? (1<<31) : (1<<30)) + /* * The i830 generation, in LVDS mode, defines P1 as the bit number set within * this field (only one bit may be set). diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index c42593fd53a5..8942f393b791 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -1395,17 +1395,42 @@ static void intel_reset_dpio(struct drm_device *dev) DPLL_REFA_CLK_ENABLE_VLV | DPLL_INTEGRATED_CRI_CLK_VLV); - /* - * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - - * 6. De-assert cmn_reset/side_reset. Same as VLV X0. - * a. GUnit 0x2110 bit[0] set to 1 (def 0) - * b. The other bits such as sfr settings / modesel may all be set - * to 0. - * - * This should only be done on init and resume from S3 with both - * PLLs disabled, or we risk losing DPIO and PLL synchronization. - */ - I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); + if (IS_CHERRYVIEW(dev)) { + enum dpio_phy phy; + u32 val; + + for (phy = DPIO_PHY0; phy < I915_NUM_PHYS_VLV; phy++) { + /* Poll for phypwrgood signal */ + if (wait_for(I915_READ(DISPLAY_PHY_STATUS) & + PHY_POWERGOOD(phy), 1)) + DRM_ERROR("Display PHY %d is not power up\n", phy); + + /* + * Deassert common lane reset for PHY. + * + * This should only be done on init and resume from S3 + * with both PLLs disabled, or we risk losing DPIO and + * PLL synchronization. + */ + val = I915_READ(DISPLAY_PHY_CONTROL); + I915_WRITE(DISPLAY_PHY_CONTROL, + PHY_COM_LANE_RESET_DEASSERT(phy, val)); + } + + } else { + /* + * From VLV2A0_DP_eDP_DPIO_driver_vbios_notes_10.docx - + * 6. De-assert cmn_reset/side_reset. Same as VLV X0. + * a. GUnit 0x2110 bit[0] set to 1 (def 0) + * b. The other bits such as sfr settings / modesel may all + * be set to 0. + * + * This should only be done on init and resume from S3 with + * both PLLs disabled, or we risk losing DPIO and PLL + * synchronization. + */ + I915_WRITE(DPIO_CTL, I915_READ(DPIO_CTL) | DPIO_CMNRST); + } } static void vlv_enable_pll(struct intel_crtc *crtc) @@ -1529,6 +1554,19 @@ static void vlv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) val = DPLL_INTEGRATED_CRI_CLK_VLV | DPLL_REFA_CLK_ENABLE_VLV; I915_WRITE(DPLL(pipe), val); POSTING_READ(DPLL(pipe)); + +} + +static void chv_disable_pll(struct drm_i915_private *dev_priv, enum pipe pipe) +{ + int dpll = DPLL(pipe); + u32 val; + + /* Set PLL en = 0 */ + val = I915_READ(dpll); + val &= ~DPLL_VCO_ENABLE; + I915_WRITE(dpll, val); + } void vlv_wait_port_ready(struct drm_i915_private *dev_priv, @@ -4446,10 +4484,14 @@ static void i9xx_crtc_disable(struct drm_crtc *crtc) if (encoder->post_disable) encoder->post_disable(encoder); - if (IS_VALLEYVIEW(dev) && !intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) - vlv_disable_pll(dev_priv, pipe); - else if (!IS_VALLEYVIEW(dev)) - i9xx_disable_pll(dev_priv, pipe); + if (!intel_pipe_has_type(crtc, INTEL_OUTPUT_DSI)) { + if (IS_CHERRYVIEW(dev)) + chv_disable_pll(dev_priv, pipe); + else if (IS_VALLEYVIEW(dev)) + vlv_disable_pll(dev_priv, pipe); + else + i9xx_disable_pll(dev_priv, pipe); + } intel_crtc->active = false; intel_update_watermarks(crtc);