From: Guenter Roeck Date: Thu, 28 Oct 2010 18:31:43 +0000 (+0200) Subject: hwmon: (lm90) Add support for max6695 and max6696 X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=06e1c0a2167d48442d0bd06373390886670aa6e5;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git hwmon: (lm90) Add support for max6695 and max6696 Signed-off-by: Guenter Roeck Signed-off-by: Jean Delvare --- diff --git a/Documentation/hwmon/lm90 b/Documentation/hwmon/lm90 index bc2c2b4e0d53..6e963b696d85 100644 --- a/Documentation/hwmon/lm90 +++ b/Documentation/hwmon/lm90 @@ -84,6 +84,17 @@ Supported chips: Addresses scanned: I2C 0x4c Datasheet: Publicly available at the Maxim website http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3500 + * Maxim MAX6695 + Prefix: 'max6695' + Addresses scanned: I2C 0x18 + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/datasheet/index.mvp/id/4199 + * Maxim MAX6696 + Prefix: 'max6695' + Addresses scanned: I2C 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, + 0x4c, 0x4d and 0x4e + Datasheet: Publicly available at the Maxim website + http://www.maxim-ic.com/datasheet/index.mvp/id/4199 * Winbond/Nuvoton W83L771AWG/ASG Prefix: 'w83l771' Addresses scanned: I2C 0x4c @@ -152,6 +163,12 @@ MAX6680 and MAX6681: * Selectable address * Remote sensor type selection +MAX6695 and MAX6696: + * Better local resolution + * Selectable address (max6696) + * Second critical temperature limit + * Two remote sensors + W83L771AWG/ASG * The AWG and ASG variants only differ in package format. * Filter and alert configuration register at 0xBF diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index c357c835eb1e..9a3742b67c8c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -614,8 +614,8 @@ config SENSORS_LM90 If you say yes here you get support for National Semiconductor LM90, LM86, LM89 and LM99, Analog Devices ADM1032 and ADT7461, Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, - MAX6680, MAX6681 and MAX6692, and Winbond/Nuvoton W83L771AWG/ASG - sensor chips. + MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, and Winbond/Nuvoton + W83L771AWG/ASG sensor chips. This driver can also be built as a module. If so, the module will be called lm90. diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c index de544817d673..366bb624e655 100644 --- a/drivers/hwmon/lm90.c +++ b/drivers/hwmon/lm90.c @@ -44,6 +44,11 @@ * chips. The MAX6680 and MAX6681 only differ in the pinout so they can * be treated identically. * + * This driver also supports the MAX6695 and MAX6696, two other sensor + * chips made by Maxim. These are also quite similar to other Maxim + * chips, but support three temperature sensors instead of two. MAX6695 + * and MAX6696 only differ in the pinout so they can be treated identically. + * * This driver also supports the ADT7461 chip from Analog Devices. * It's supported in both compatibility and extended mode. It is mostly * compatible with LM90 except for a data format difference for the @@ -96,7 +101,7 @@ static const unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, 0x29, 0x2a, 0x2b, 0x4c, 0x4d, 0x4e, I2C_CLIENT_END }; enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, - max6646, w83l771 }; + max6646, w83l771, max6696 }; /* * The LM90 registers @@ -137,9 +142,10 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_REG_R_TCRIT_HYST 0x21 #define LM90_REG_W_TCRIT_HYST 0x21 -/* MAX6646/6647/6649/6657/6658/6659 registers */ +/* MAX6646/6647/6649/6657/6658/6659/6695/6696 registers */ #define MAX6657_REG_R_LOCAL_TEMPL 0x11 +#define MAX6696_REG_R_STATUS2 0x12 #define MAX6659_REG_R_REMOTE_EMERG 0x16 #define MAX6659_REG_W_REMOTE_EMERG 0x16 #define MAX6659_REG_R_LOCAL_EMERG 0x17 @@ -154,6 +160,8 @@ enum chips { lm90, adm1032, lm99, lm86, max6657, max6659, adt7461, max6680, #define LM90_HAVE_LOCAL_EXT (1 << 2) /* extended local temperature */ #define LM90_HAVE_REM_LIMIT_EXT (1 << 3) /* extended remote limit */ #define LM90_HAVE_EMERGENCY (1 << 4) /* 3rd upper (emergency) limit */ +#define LM90_HAVE_EMERGENCY_ALARM (1 << 5)/* emergency alarm */ +#define LM90_HAVE_TEMP3 (1 << 6) /* 3rd temperature sensor */ /* * Functions declaration @@ -166,6 +174,9 @@ static void lm90_init_client(struct i2c_client *client); static void lm90_alert(struct i2c_client *client, unsigned int flag); static int lm90_remove(struct i2c_client *client); static struct lm90_data *lm90_update_device(struct device *dev); +static inline void lm90_select_remote_channel(struct i2c_client *client, + struct lm90_data *data, + int channel); /* * Driver data (common to all clients) @@ -186,6 +197,8 @@ static const struct i2c_device_id lm90_id[] = { { "max6659", max6659 }, { "max6680", max6680 }, { "max6681", max6680 }, + { "max6695", max6696 }, + { "max6696", max6696 }, { "w83l771", w83l771 }, { } }; @@ -217,22 +230,29 @@ struct lm90_data { int flags; u8 config_orig; /* Original configuration register value */ - u8 alert_alarms; /* Which alarm bits trigger ALERT# */ + u16 alert_alarms; /* Which alarm bits trigger ALERT# */ + /* Upper 8 bits for max6695/96 */ /* registers values */ - s8 temp8[6]; /* 0: local low limit + s8 temp8[8]; /* 0: local low limit 1: local high limit 2: local critical limit 3: remote critical limit - 4: local emergency limit (max6659 only) - 5: remote emergency limit (max6659 only) */ - s16 temp11[5]; /* 0: remote input + 4: local emergency limit (max6659 and max6695/96) + 5: remote emergency limit (max6659 and max6695/96) + 6: remote 2 critical limit (max6695/96 only) + 7: remote 2 emergency limit (max6695/96 only) */ + s16 temp11[8]; /* 0: remote input 1: remote low limit 2: remote high limit - 3: remote offset (except max6646 and max6657/58/59) - 4: local input */ + 3: remote offset (except max6646, max6657/58/59, + and max6695/96) + 4: local input + 5: remote 2 input (max6695/96 only) + 6: remote 2 low limit (max6695/96 only) + 7: remote 2 high limit (ma6695/96 only) */ u8 temp_hyst; - u8 alarms; /* bitvector */ + u16 alarms; /* bitvector (upper 8 bits for max6695/96) */ }; /* @@ -390,13 +410,15 @@ static ssize_t show_temp8(struct device *dev, struct device_attribute *devattr, static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, const char *buf, size_t count) { - static const u8 reg[6] = { + static const u8 reg[8] = { LM90_REG_W_LOCAL_LOW, LM90_REG_W_LOCAL_HIGH, LM90_REG_W_LOCAL_CRIT, LM90_REG_W_REMOTE_CRIT, MAX6659_REG_W_LOCAL_EMERG, MAX6659_REG_W_REMOTE_EMERG, + LM90_REG_W_REMOTE_CRIT, + MAX6659_REG_W_REMOTE_EMERG, }; struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); @@ -421,7 +443,11 @@ static ssize_t set_temp8(struct device *dev, struct device_attribute *devattr, data->temp8[nr] = temp_to_u8(val); else data->temp8[nr] = temp_to_s8(val); + + lm90_select_remote_channel(client, data, nr >= 6); i2c_smbus_write_byte_data(client, reg[nr], data->temp8[nr]); + lm90_select_remote_channel(client, data, 0); + mutex_unlock(&data->update_lock); return count; } @@ -453,10 +479,13 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, struct { u8 high; u8 low; - } reg[3] = { - { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL }, - { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL }, - { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL } + int channel; + } reg[5] = { + { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 0 }, + { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 0 }, + { LM90_REG_W_REMOTE_OFFSH, LM90_REG_W_REMOTE_OFFSL, 0 }, + { LM90_REG_W_REMOTE_LOWH, LM90_REG_W_REMOTE_LOWL, 1 }, + { LM90_REG_W_REMOTE_HIGHH, LM90_REG_W_REMOTE_HIGHL, 1 } }; struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); @@ -485,11 +514,14 @@ static ssize_t set_temp11(struct device *dev, struct device_attribute *devattr, else data->temp11[index] = temp_to_s8(val) << 8; + lm90_select_remote_channel(client, data, reg[nr].channel); i2c_smbus_write_byte_data(client, reg[nr].high, data->temp11[index] >> 8); if (data->flags & LM90_HAVE_REM_LIMIT_EXT) i2c_smbus_write_byte_data(client, reg[nr].low, data->temp11[index] & 0xff); + lm90_select_remote_channel(client, data, 0); + mutex_unlock(&data->update_lock); return count; } @@ -643,6 +675,62 @@ static const struct attribute_group lm90_emergency_group = { .attrs = lm90_emergency_attributes, }; +static SENSOR_DEVICE_ATTR(temp1_emergency_alarm, S_IRUGO, show_alarm, NULL, 15); +static SENSOR_DEVICE_ATTR(temp2_emergency_alarm, S_IRUGO, show_alarm, NULL, 13); + +static struct attribute *lm90_emergency_alarm_attributes[] = { + &sensor_dev_attr_temp1_emergency_alarm.dev_attr.attr, + &sensor_dev_attr_temp2_emergency_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm90_emergency_alarm_group = { + .attrs = lm90_emergency_alarm_attributes, +}; + +/* + * Additional attributes for devices with 3 temperature sensors + */ +static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp11, NULL, 0, 5); +static SENSOR_DEVICE_ATTR_2(temp3_min, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 3, 6); +static SENSOR_DEVICE_ATTR_2(temp3_max, S_IWUSR | S_IRUGO, show_temp11, + set_temp11, 4, 7); +static SENSOR_DEVICE_ATTR(temp3_crit, S_IWUSR | S_IRUGO, show_temp8, + set_temp8, 6); +static SENSOR_DEVICE_ATTR(temp3_crit_hyst, S_IRUGO, show_temphyst, NULL, 6); +static SENSOR_DEVICE_ATTR(temp3_emergency, S_IWUSR | S_IRUGO, show_temp8, + set_temp8, 7); +static SENSOR_DEVICE_ATTR(temp3_emergency_hyst, S_IRUGO, show_temphyst, + NULL, 7); + +static SENSOR_DEVICE_ATTR(temp3_crit_alarm, S_IRUGO, show_alarm, NULL, 9); +static SENSOR_DEVICE_ATTR(temp3_fault, S_IRUGO, show_alarm, NULL, 10); +static SENSOR_DEVICE_ATTR(temp3_min_alarm, S_IRUGO, show_alarm, NULL, 11); +static SENSOR_DEVICE_ATTR(temp3_max_alarm, S_IRUGO, show_alarm, NULL, 12); +static SENSOR_DEVICE_ATTR(temp3_emergency_alarm, S_IRUGO, show_alarm, NULL, 14); + +static struct attribute *lm90_temp3_attributes[] = { + &sensor_dev_attr_temp3_input.dev_attr.attr, + &sensor_dev_attr_temp3_min.dev_attr.attr, + &sensor_dev_attr_temp3_max.dev_attr.attr, + &sensor_dev_attr_temp3_crit.dev_attr.attr, + &sensor_dev_attr_temp3_crit_hyst.dev_attr.attr, + &sensor_dev_attr_temp3_emergency.dev_attr.attr, + &sensor_dev_attr_temp3_emergency_hyst.dev_attr.attr, + + &sensor_dev_attr_temp3_fault.dev_attr.attr, + &sensor_dev_attr_temp3_min_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_max_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr, + &sensor_dev_attr_temp3_emergency_alarm.dev_attr.attr, + NULL +}; + +static const struct attribute_group lm90_temp3_group = { + .attrs = lm90_temp3_attributes, +}; + /* pec used for ADM1032 only */ static ssize_t show_pec(struct device *dev, struct device_attribute *dummy, char *buf) @@ -720,6 +808,30 @@ static int lm90_read_reg(struct i2c_client *client, u8 reg, u8 *value) return 0; } +/* + * client->update_lock must be held when calling this function (unless we are + * in detection or initialization steps), and while a remote channel other + * than channel 0 is selected. Also, calling code must make sure to re-select + * external channel 0 before releasing the lock. This is necessary because + * various registers have different meanings as a result of selecting a + * non-default remote channel. + */ +static inline void lm90_select_remote_channel(struct i2c_client *client, + struct lm90_data *data, + int channel) +{ + u8 config; + + if (data->kind == max6696) { + lm90_read_reg(client, LM90_REG_R_CONFIG1, &config); + config &= ~0x08; + if (channel) + config |= 0x08; + i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, + config); + } +} + /* Return 0 if detection is successful, -ENODEV otherwise */ static int lm90_detect(struct i2c_client *new_client, struct i2c_board_info *info) @@ -794,6 +906,23 @@ static int lm90_detect(struct i2c_client *new_client, } } else if (man_id == 0x4D) { /* Maxim */ + int reg_emerg, reg_emerg2, reg_status2; + + /* + * We read MAX6659_REG_R_REMOTE_EMERG twice, and re-read + * LM90_REG_R_MAN_ID in between. If MAX6659_REG_R_REMOTE_EMERG + * exists, both readings will reflect the same value. Otherwise, + * the readings will be different. + */ + if ((reg_emerg = i2c_smbus_read_byte_data(new_client, + MAX6659_REG_R_REMOTE_EMERG)) < 0 + || i2c_smbus_read_byte_data(new_client, LM90_REG_R_MAN_ID) < 0 + || (reg_emerg2 = i2c_smbus_read_byte_data(new_client, + MAX6659_REG_R_REMOTE_EMERG)) < 0 + || (reg_status2 = i2c_smbus_read_byte_data(new_client, + MAX6696_REG_R_STATUS2)) < 0) + return -ENODEV; + /* * The MAX6657, MAX6658 and MAX6659 do NOT have a chip_id * register. Reading from that address will return the last @@ -816,6 +945,24 @@ static int lm90_detect(struct i2c_client *new_client, else name = "max6659"; } else + /* + * Even though MAX6695 and MAX6696 do not have a chip ID + * register, reading it returns 0x01. Bit 4 of the config1 + * register is unused and should return zero when read. Bit 0 of + * the status2 register is unused and should return zero when + * read. + * + * MAX6695 and MAX6696 have an additional set of temperature + * limit registers. We can detect those chips by checking if + * one of those registers exists. + */ + if (chip_id == 0x01 + && (reg_config1 & 0x10) == 0x00 + && (reg_status2 & 0x01) == 0x00 + && reg_emerg == reg_emerg2 + && reg_convrate <= 0x07) { + name = "max6696"; + } else /* * The chip_id register of the MAX6680 and MAX6681 holds the * revision of the chip. The lowest bit of the config1 register @@ -861,6 +1008,11 @@ static int lm90_detect(struct i2c_client *new_client, static void lm90_remove_files(struct i2c_client *client, struct lm90_data *data) { + if (data->flags & LM90_HAVE_TEMP3) + sysfs_remove_group(&client->dev.kobj, &lm90_temp3_group); + if (data->flags & LM90_HAVE_EMERGENCY_ALARM) + sysfs_remove_group(&client->dev.kobj, + &lm90_emergency_alarm_group); if (data->flags & LM90_HAVE_EMERGENCY) sysfs_remove_group(&client->dev.kobj, &lm90_emergency_group); @@ -901,6 +1053,9 @@ static int lm90_probe(struct i2c_client *new_client, case lm86: data->alert_alarms = 0x7b; break; + case max6696: + data->alert_alarms = 0x187c; + break; default: data->alert_alarms = 0x7c; break; @@ -908,20 +1063,24 @@ static int lm90_probe(struct i2c_client *new_client, /* Set chip capabilities */ if (data->kind != max6657 && data->kind != max6659 - && data->kind != max6646) + && data->kind != max6646 && data->kind != max6696) data->flags |= LM90_HAVE_OFFSET; if (data->kind == max6657 || data->kind == max6659 - || data->kind == max6646) + || data->kind == max6646 || data->kind == max6696) data->flags |= LM90_HAVE_LOCAL_EXT; if (data->kind != max6657 && data->kind != max6659 - && data->kind != max6646 && data->kind != max6680) + && data->kind != max6646 && data->kind != max6680 + && data->kind != max6696) data->flags |= LM90_HAVE_REM_LIMIT_EXT; - if (data->kind == max6659) + if (data->kind == max6659 || data->kind == max6696) data->flags |= LM90_HAVE_EMERGENCY; + if (data->kind == max6696) + data->flags |= LM90_HAVE_EMERGENCY_ALARM | LM90_HAVE_TEMP3; + /* Initialize the LM90 chip */ lm90_init_client(new_client); @@ -946,6 +1105,18 @@ static int lm90_probe(struct i2c_client *new_client, if (err) goto exit_remove_files; } + if (data->flags & LM90_HAVE_EMERGENCY_ALARM) { + err = sysfs_create_group(&new_client->dev.kobj, + &lm90_emergency_alarm_group); + if (err) + goto exit_remove_files; + } + if (data->flags & LM90_HAVE_TEMP3) { + err = sysfs_create_group(&new_client->dev.kobj, + &lm90_temp3_group); + if (err) + goto exit_remove_files; + } data->hwmon_dev = hwmon_device_register(&new_client->dev); if (IS_ERR(data->hwmon_dev)) { @@ -993,6 +1164,12 @@ static void lm90_init_client(struct i2c_client *client) if (data->kind == max6680) config |= 0x18; + /* + * Select external channel 0 for max6695/96 + */ + if (data->kind == max6696) + config &= ~0x08; + config &= 0xBF; /* run */ if (config != data->config_orig) /* Only write if changed */ i2c_smbus_write_byte_data(client, LM90_REG_W_CONFIG1, config); @@ -1016,10 +1193,14 @@ static int lm90_remove(struct i2c_client *client) static void lm90_alert(struct i2c_client *client, unsigned int flag) { struct lm90_data *data = i2c_get_clientdata(client); - u8 config, alarms; + u8 config, alarms, alarms2 = 0; lm90_read_reg(client, LM90_REG_R_STATUS, &alarms); - if ((alarms & 0x7f) == 0) { + + if (data->kind == max6696) + lm90_read_reg(client, MAX6696_REG_R_STATUS2, &alarms2); + + if ((alarms & 0x7f) == 0 && (alarms2 & 0xfe) == 0) { dev_info(&client->dev, "Everything OK\n"); } else { if (alarms & 0x61) @@ -1032,6 +1213,10 @@ static void lm90_alert(struct i2c_client *client, unsigned int flag) dev_warn(&client->dev, "temp%d diode open, please check!\n", 2); + if (alarms2 & 0x18) + dev_warn(&client->dev, + "temp%d out of range, please check!\n", 3); + /* Disable ALERT# output, because these chips don't implement SMBus alert correctly; they should only hold the alert line low briefly. */ @@ -1087,6 +1272,7 @@ static struct lm90_data *lm90_update_device(struct device *dev) if (time_after(jiffies, data->last_updated + HZ / 2 + HZ / 10) || !data->valid) { u8 h, l; + u8 alarms; dev_dbg(&client->dev, "Updating lm90 data.\n"); lm90_read_reg(client, LM90_REG_R_LOCAL_LOW, &data->temp8[0]); @@ -1135,7 +1321,27 @@ static struct lm90_data *lm90_update_device(struct device *dev) lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG, &data->temp8[5]); } - lm90_read_reg(client, LM90_REG_R_STATUS, &data->alarms); + lm90_read_reg(client, LM90_REG_R_STATUS, &alarms); + data->alarms = alarms; /* save as 16 bit value */ + + if (data->kind == max6696) { + lm90_select_remote_channel(client, data, 1); + lm90_read_reg(client, LM90_REG_R_REMOTE_CRIT, + &data->temp8[6]); + lm90_read_reg(client, MAX6659_REG_R_REMOTE_EMERG, + &data->temp8[7]); + lm90_read16(client, LM90_REG_R_REMOTE_TEMPH, + LM90_REG_R_REMOTE_TEMPL, &data->temp11[5]); + if (!lm90_read_reg(client, LM90_REG_R_REMOTE_LOWH, &h)) + data->temp11[6] = h << 8; + if (!lm90_read_reg(client, LM90_REG_R_REMOTE_HIGHH, &h)) + data->temp11[7] = h << 8; + lm90_select_remote_channel(client, data, 0); + + if (!lm90_read_reg(client, MAX6696_REG_R_STATUS2, + &alarms)) + data->alarms |= alarms << 8; + } /* Re-enable ALERT# output if it was originally enabled and * relevant alarms are all clear */