From: Alan Cox <alan@lxorguk.ukuu.org.uk>
Date: Wed, 26 Sep 2007 14:23:17 +0000 (+0100)
Subject: pata_pdc202xx_old MWDMA fixes, and notes
X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=06b74dd28fa607249c5e41e5f1f6dd1885fe0a0d;p=GitHub%2Fmt8127%2Fandroid_kernel_alcatel_ttab.git

pata_pdc202xx_old MWDMA fixes, and notes

I've been doing an audit of this driver to try and find out why we have
problems with some Clevo boxes that use it. Didn't get anywhere other
than to discover all the bug reporters I have use vmware, which may or
may not be chance.

In the process however I did find out our MWDMA2 performance was a bit
low and code review showed the MWDMA0/2 timings are reversed due to a
thinko in the table ordering

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index fd4350029bc4..65d951618c60 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -9,7 +9,7 @@
  * First cut with LBA48/ATAPI
  *
  * TODO:
- *	Channel interlock/reset on both required
+ *	Channel interlock/reset on both required ?
  */
 
 #include <linux/kernel.h>
@@ -22,7 +22,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.4.2"
+#define DRV_VERSION "0.4.3"
 
 static int pdc2026x_cable_detect(struct ata_port *ap)
 {
@@ -106,9 +106,9 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 		{ 0x20, 0x01 }
 	};
 	static u8 mdma_timing[3][2] = {
-		{ 0x60, 0x03 },
-		{ 0x60, 0x04 },
 		{ 0xe0, 0x0f },
+		{ 0x60, 0x04 },
+		{ 0x60, 0x03 },
 	};
 	u8 r_bp, r_cp;
 
@@ -139,6 +139,9 @@ static void pdc202xx_set_dmamode(struct ata_port *ap, struct ata_device *adev)
  *
  *	In UDMA3 or higher we have to clock switch for the duration of the
  *	DMA transfer sequence.
+ *
+ *	Note: The host lock held by the libata layer protects
+ *	us from two channels both trying to set DMA bits at once
  */
 
 static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
@@ -187,6 +190,9 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
  *
  *	After a DMA completes we need to put the clock back to 33MHz for
  *	PIO timings.
+ *
+ *	Note: The host lock held by the libata layer protects
+ *	us from two channels both trying to set DMA bits at once
  */
 
 static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
@@ -206,7 +212,6 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
 		iowrite32(0, atapi_reg);
 		iowrite8(ioread8(clock) & ~sel66, clock);
 	}
-	/* Check we keep host level locking here */
 	/* Flip back to 33Mhz for PIO */
 	if (adev->dma_mode >= XFER_UDMA_2)
 		iowrite8(ioread8(clock) & ~sel66, clock);