From: Anthony Romano Date: Fri, 25 Nov 2016 11:13:34 +0000 (-0800) Subject: mt7601u: wait for clear rxq when stopping mac X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=05db221e30a924f5f80cbef34eb9f210522ceb84;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git mt7601u: wait for clear rxq when stopping mac mt7601u_mac_stop_hw should stop polling the rxq once it remains empty but instead continues polling after the rxq status stays clear; bringing down the interface takes about six seconds from this alone. Speed up path by exiting rxq loop once status repeatedly polls empty. Signed-off-by: Anthony Romano Reviewed-by: Jakub Kicinski Signed-off-by: Kalle Valo --- diff --git a/drivers/net/wireless/mediatek/mt7601u/init.c b/drivers/net/wireless/mediatek/mt7601u/init.c index 44d46e25db80..a6e901766226 100644 --- a/drivers/net/wireless/mediatek/mt7601u/init.c +++ b/drivers/net/wireless/mediatek/mt7601u/init.c @@ -293,13 +293,13 @@ static void mt7601u_mac_stop_hw(struct mt7601u_dev *dev) ok = 0; i = 200; while (i--) { - if ((mt76_rr(dev, 0x0430) & 0x00ff0000) || - (mt76_rr(dev, 0x0a30) & 0xffffffff) || - (mt76_rr(dev, 0x0a34) & 0xffffffff)) - ok++; - if (ok > 6) - break; - + if (!(mt76_rr(dev, MT_RXQ_STA) & 0x00ff0000) && + !mt76_rr(dev, 0x0a30) && + !mt76_rr(dev, 0x0a34)) { + if (ok++ > 5) + break; + continue; + } msleep(1); } diff --git a/drivers/net/wireless/mediatek/mt7601u/regs.h b/drivers/net/wireless/mediatek/mt7601u/regs.h index 27a429d90cec..2a8837002f00 100644 --- a/drivers/net/wireless/mediatek/mt7601u/regs.h +++ b/drivers/net/wireless/mediatek/mt7601u/regs.h @@ -192,6 +192,9 @@ #define MT_BCN_OFFSET_BASE 0x041c #define MT_BCN_OFFSET(_n) (MT_BCN_OFFSET_BASE + ((_n) << 2)) +#define MT_RXQ_STA 0x0430 +#define MT_TXQ_STA 0x0434 + #define MT_RF_CSR_CFG 0x0500 #define MT_RF_CSR_CFG_DATA GENMASK(7, 0) #define MT_RF_CSR_CFG_REG_ID GENMASK(13, 8)