From: Russell King Date: Fri, 3 Dec 2010 11:09:48 +0000 (+0000) Subject: ARM: SMP: consolidate the common parts of smp_prepare_cpus() X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=05c74a6cbcfb416286a947668ba32f63d99fe74a;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git ARM: SMP: consolidate the common parts of smp_prepare_cpus() There is a certain amount of smp_prepare_cpus() which doesn't belong in the platform support code - that is, code which is invariant to the SMP implementation. Move this code into arch/arm/kernel/smp.c, and add a platform_ prefix to the original function. Signed-off-by: Russell King --- diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h index f93d0a637016..96ed521f2408 100644 --- a/arch/arm/include/asm/smp.h +++ b/arch/arm/include/asm/smp.h @@ -45,10 +45,6 @@ asmlinkage void do_IPI(int ipinr, struct pt_regs *regs); */ extern void smp_init_cpus(void); -/* - * Move global data into per-processor storage. - */ -extern void smp_store_cpu_info(unsigned int cpuid); /* * Raise an IPI cross call on CPUs in callmap. @@ -72,6 +68,11 @@ asmlinkage void secondary_start_kernel(void); */ extern void platform_secondary_init(unsigned int cpu); +/* + * Initialize cpu_possible map, and enable coherency + */ +extern void platform_smp_prepare_cpus(unsigned int); + /* * Initial data for bringing up a secondary CPU. */ diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index 64f2d198c764..c66f2d3f65d3 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -281,6 +281,17 @@ void __ref cpu_die(void) } #endif /* CONFIG_HOTPLUG_CPU */ +/* + * Called by both boot and secondaries to move global data into + * per-processor storage. + */ +static void __cpuinit smp_store_cpu_info(unsigned int cpuid) +{ + struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); + + cpu_info->loops_per_jiffy = loops_per_jiffy; +} + /* * This is the secondary CPU boot entry. We're using this CPUs * idle thread stack, but a set of temporary page tables. @@ -339,17 +350,6 @@ asmlinkage void __cpuinit secondary_start_kernel(void) cpu_idle(); } -/* - * Called by both boot and secondaries to move global data into - * per-processor storage. - */ -void __cpuinit smp_store_cpu_info(unsigned int cpuid) -{ - struct cpuinfo_arm *cpu_info = &per_cpu(cpu_data, cpuid); - - cpu_info->loops_per_jiffy = loops_per_jiffy; -} - void __init smp_cpus_done(unsigned int max_cpus) { int cpu; @@ -372,6 +372,33 @@ void __init smp_prepare_boot_cpu(void) per_cpu(cpu_data, cpu).idle = current; } +void __init smp_prepare_cpus(unsigned int max_cpus) +{ + unsigned int ncores = num_possible_cpus(); + + smp_store_cpu_info(smp_processor_id()); + + /* + * are we trying to boot more cores than exist? + */ + if (max_cpus > ncores) + max_cpus = ncores; + + if (max_cpus > 1) { + /* + * Enable the local timer or broadcast device for the + * boot CPU, but only if we have more than one CPU. + */ + percpu_timer_setup(); + + /* + * Initialise the SCU if there are more than one CPU + * and let them know where to start. + */ + platform_smp_prepare_cpus(max_cpus); + } +} + void arch_send_call_function_ipi_mask(const struct cpumask *mask) { smp_cross_call(mask, IPI_CALL_FUNC); diff --git a/arch/arm/mach-omap2/omap-smp.c b/arch/arm/mach-omap2/omap-smp.c index 405a8fc53308..3c3d6796c97c 100644 --- a/arch/arm/mach-omap2/omap-smp.c +++ b/arch/arm/mach-omap2/omap-smp.c @@ -21,7 +21,6 @@ #include #include -#include #include #include #include @@ -123,20 +122,10 @@ void __init smp_init_cpus(void) set_cpu_possible(i, true); } -void __init smp_prepare_cpus(unsigned int max_cpus) +void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - unsigned int ncores = num_possible_cpus(); - unsigned int cpu = smp_processor_id(); int i; - smp_store_cpu_info(cpu); - - /* - * are we trying to boot more cores than exist? - */ - if (max_cpus > ncores) - max_cpus = ncores; - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. @@ -144,18 +133,10 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - if (max_cpus > 1) { - /* - * Enable the local timer or broadcast device for the - * boot CPU, but only if we have more than one CPU. - */ - percpu_timer_setup(); - - /* - * Initialise the SCU and wake up the secondary core using - * wakeup_secondary(). - */ - scu_enable(scu_base); - wakeup_secondary(); - } + /* + * Initialise the SCU and wake up the secondary core using + * wakeup_secondary(). + */ + scu_enable(scu_base); + wakeup_secondary(); } diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c index ef3cc86f5140..380562cd6580 100644 --- a/arch/arm/mach-realview/platsmp.c +++ b/arch/arm/mach-realview/platsmp.c @@ -19,7 +19,6 @@ #include #include #include -#include #include #include @@ -147,20 +146,10 @@ void __init smp_init_cpus(void) set_cpu_possible(i, true); } -void __init smp_prepare_cpus(unsigned int max_cpus) +void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - unsigned int ncores = num_possible_cpus(); - unsigned int cpu = smp_processor_id(); int i; - smp_store_cpu_info(cpu); - - /* - * are we trying to boot more cores than exist? - */ - if (max_cpus > ncores) - max_cpus = ncores; - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. @@ -168,22 +157,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - if (max_cpus > 1) { - /* - * Enable the local timer or broadcast device for the - * boot CPU, but only if we have more than one CPU. - */ - percpu_timer_setup(); - - scu_enable(scu_base_addr()); - - /* - * Write the address of secondary startup into the - * system-wide flags register. The BootMonitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ - __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), - __io_address(REALVIEW_SYS_FLAGSSET)); - } + scu_enable(scu_base_addr()); + + /* + * Write the address of secondary startup into the + * system-wide flags register. The BootMonitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. + */ + __raw_writel(BSYM(virt_to_phys(realview_secondary_startup)), + __io_address(REALVIEW_SYS_FLAGSSET)); } diff --git a/arch/arm/mach-s5pv310/platsmp.c b/arch/arm/mach-s5pv310/platsmp.c index 560ada83b0b1..51c44d4c9890 100644 --- a/arch/arm/mach-s5pv310/platsmp.c +++ b/arch/arm/mach-s5pv310/platsmp.c @@ -22,7 +22,6 @@ #include #include -#include #include #include @@ -142,18 +141,10 @@ void __init smp_init_cpus(void) set_cpu_possible(i, true); } -void __init smp_prepare_cpus(unsigned int max_cpus) +void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - unsigned int ncores = num_possible_cpus(); - unsigned int cpu = smp_processor_id(); int i; - smp_store_cpu_info(cpu); - - /* are we trying to boot more cores than exist? */ - if (max_cpus > ncores) - max_cpus = ncores; - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. @@ -161,25 +152,13 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); + scu_enable(scu_base_addr()); + /* - * Initialise the SCU if there are more than one CPU and let - * them know where to start. + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. */ - if (max_cpus > 1) { - /* - * Enable the local timer or broadcast device for the - * boot CPU, but only if we have more than one CPU. - */ - percpu_timer_setup(); - - scu_enable(scu_base_addr()); - - /* - * Write the address of secondary startup into the - * system-wide flags register. The boot monitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ __raw_writel(BSYM(virt_to_phys(s5pv310_secondary_startup)), S5P_VA_SYSRAM); - } } diff --git a/arch/arm/mach-tegra/platsmp.c b/arch/arm/mach-tegra/platsmp.c index 66d0634e7a96..b66a0c2d990d 100644 --- a/arch/arm/mach-tegra/platsmp.c +++ b/arch/arm/mach-tegra/platsmp.c @@ -22,7 +22,6 @@ #include #include #include -#include #include #include @@ -127,20 +126,10 @@ void __init smp_init_cpus(void) cpu_set(i, cpu_possible_map); } -void __init smp_prepare_cpus(unsigned int max_cpus) +void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - unsigned int ncores = scu_get_core_count(scu_base); - unsigned int cpu = smp_processor_id(); int i; - smp_store_cpu_info(cpu); - - /* - * are we trying to boot more cores than exist? - */ - if (max_cpus > ncores) - max_cpus = ncores; - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. @@ -148,8 +137,5 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - if (max_cpus > 1) { - percpu_timer_setup(); - scu_enable(scu_base); - } + scu_enable(scu_base); } diff --git a/arch/arm/mach-ux500/platsmp.c b/arch/arm/mach-ux500/platsmp.c index fd40fa175913..458a288981cb 100644 --- a/arch/arm/mach-ux500/platsmp.c +++ b/arch/arm/mach-ux500/platsmp.c @@ -18,7 +18,6 @@ #include #include -#include #include #include @@ -138,20 +137,10 @@ void __init smp_init_cpus(void) set_cpu_possible(i, true); } -void __init smp_prepare_cpus(unsigned int max_cpus) +void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - unsigned int ncores = num_possible_cpus(); - unsigned int cpu = smp_processor_id(); int i; - smp_store_cpu_info(cpu); - - /* - * are we trying to boot more cores than exist? - */ - if (max_cpus > ncores) - max_cpus = ncores; - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. @@ -159,13 +148,6 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); - if (max_cpus > 1) { - /* - * Enable the local timer or broadcast device for the - * boot CPU, but only if we have more than one CPU. - */ - percpu_timer_setup(); - scu_enable(__io_address(UX500_SCU_BASE)); - wakeup_secondary(); - } + scu_enable(__io_address(UX500_SCU_BASE)); + wakeup_secondary(); } diff --git a/arch/arm/mach-vexpress/platsmp.c b/arch/arm/mach-vexpress/platsmp.c index b5a758683668..a0341d14ff2a 100644 --- a/arch/arm/mach-vexpress/platsmp.c +++ b/arch/arm/mach-vexpress/platsmp.c @@ -17,7 +17,6 @@ #include #include -#include #include #include @@ -136,20 +135,10 @@ void __init smp_init_cpus(void) set_cpu_possible(i, true); } -void __init smp_prepare_cpus(unsigned int max_cpus) +void __init platform_smp_prepare_cpus(unsigned int max_cpus) { - unsigned int ncores = num_possible_cpus(); - unsigned int cpu = smp_processor_id(); int i; - smp_store_cpu_info(cpu); - - /* - * are we trying to boot more cores than exist? - */ - if (max_cpus > ncores) - max_cpus = ncores; - /* * Initialise the present map, which describes the set of CPUs * actually populated at the present time. @@ -157,27 +146,15 @@ void __init smp_prepare_cpus(unsigned int max_cpus) for (i = 0; i < max_cpus; i++) set_cpu_present(i, true); + scu_enable(scu_base_addr()); + /* - * Initialise the SCU if there are more than one CPU and let - * them know where to start. + * Write the address of secondary startup into the + * system-wide flags register. The boot monitor waits + * until it receives a soft interrupt, and then the + * secondary CPU branches to this address. */ - if (max_cpus > 1) { - /* - * Enable the local timer or broadcast device for the - * boot CPU, but only if we have more than one CPU. - */ - percpu_timer_setup(); - - scu_enable(scu_base_addr()); - - /* - * Write the address of secondary startup into the - * system-wide flags register. The boot monitor waits - * until it receives a soft interrupt, and then the - * secondary CPU branches to this address. - */ - writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); - writel(BSYM(virt_to_phys(vexpress_secondary_startup)), - MMIO_P2V(V2M_SYS_FLAGSSET)); - } + writel(~0, MMIO_P2V(V2M_SYS_FLAGSCLR)); + writel(BSYM(virt_to_phys(vexpress_secondary_startup)), + MMIO_P2V(V2M_SYS_FLAGSSET)); }