From: Manuel Lauss Date: Mon, 2 Nov 2009 20:21:44 +0000 (+0100) Subject: MIPS/SOUND: Alchemy: DB1200 AC97+I2S audio support. X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=05ae3231801df8fdb4e1c0aa4aa6b8d7278eddde;p=GitHub%2FLineageOS%2Fandroid_kernel_samsung_universal7580.git MIPS/SOUND: Alchemy: DB1200 AC97+I2S audio support. Machine driver for DB1200 AC97 and I2S audio systems, intended as a proper reference asoc machine for Alchemy-based systems. AC97/I2S can be selected at boot time by setting switch S6.7. Signed-off-by: Manuel Lauss Cc: Linux-MIPS Cc: alsa-devel@alsa-project.org Cc: Mark Brown Acked-by: Mark Brown Signed-off-by: Ralf Baechle --- diff --git a/arch/mips/alchemy/devboards/db1200/platform.c b/arch/mips/alchemy/devboards/db1200/platform.c index 5a6ef8deda1..d6b3e64376c 100644 --- a/arch/mips/alchemy/devboards/db1200/platform.c +++ b/arch/mips/alchemy/devboards/db1200/platform.c @@ -399,12 +399,43 @@ static struct platform_device db1200_spi_dev = { .resource = au1200_psc0_res, }; +static struct resource au1200_psc1_res[] = { + [0] = { + .start = PSC1_PHYS_ADDR, + .end = PSC1_PHYS_ADDR + 0x000fffff, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = AU1200_PSC1_INT, + .end = AU1200_PSC1_INT, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = DSCR_CMD0_PSC1_TX, + .end = DSCR_CMD0_PSC1_TX, + .flags = IORESOURCE_DMA, + }, + [3] = { + .start = DSCR_CMD0_PSC1_RX, + .end = DSCR_CMD0_PSC1_RX, + .flags = IORESOURCE_DMA, + }, +}; + +static struct platform_device db1200_audio_dev = { + /* name assigned later based on switch setting */ + .id = 1, /* PSC ID */ + .num_resources = ARRAY_SIZE(au1200_psc1_res), + .resource = au1200_psc1_res, +}; + static struct platform_device *db1200_devs[] __initdata = { NULL, /* PSC0, selected by S6.8 */ &db1200_ide_dev, &db1200_eth_dev, &db1200_rtc_dev, &db1200_nand_dev, + &db1200_audio_dev, }; static int __init db1200_dev_init(void) @@ -419,6 +450,7 @@ static int __init db1200_dev_init(void) ARRAY_SIZE(db1200_i2c_devs)); /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) + * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) */ /* NOTE: GPIO215 controls OTG VBUS supply. In SPI mode however @@ -456,6 +488,25 @@ static int __init db1200_dev_init(void) __raw_writel(pfc, (void __iomem *)SYS_PINFUNC); wmb(); + /* Audio: DIP7 selects I2S(0)/AC97(1), but need I2C for I2S! + * so: DIP7=1 || DIP8=0 => AC97, DIP7=0 && DIP8=1 => I2S + */ + sw &= BCSR_SWITCHES_DIP_8 | BCSR_SWITCHES_DIP_7; + if (sw == BCSR_SWITCHES_DIP_8) { + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_PSC1MUX); + db1200_audio_dev.name = "au1xpsc_i2s"; + printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n"); + } else { + bcsr_mod(BCSR_RESETS, BCSR_RESETS_PSC1MUX, 0); + db1200_audio_dev.name = "au1xpsc_ac97"; + printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n"); + } + + /* Audio PSC clock is supplied externally. (FIXME: platdata!!) */ + __raw_writel(PSC_SEL_CLK_SERCLK, + (void __iomem *)KSEG1ADDR(PSC1_PHYS_ADDR) + PSC_SEL_OFFSET); + wmb(); + db1x_register_pcmcia_socket(PCMCIA_ATTR_PSEUDO_PHYS, PCMCIA_ATTR_PSEUDO_PHYS + 0x00040000 - 1, PCMCIA_MEM_PSEUDO_PHYS, diff --git a/sound/soc/au1x/Kconfig b/sound/soc/au1x/Kconfig index 410a893aa66..4b67140fdec 100644 --- a/sound/soc/au1x/Kconfig +++ b/sound/soc/au1x/Kconfig @@ -22,11 +22,13 @@ config SND_SOC_AU1XPSC_AC97 ## ## Boards ## -config SND_SOC_SAMPLE_PSC_AC97 - tristate "Sample Au12x0/Au1550 PSC AC97 sound machine" +config SND_SOC_DB1200 + tristate "DB1200 AC97+I2S audio support" depends on SND_SOC_AU1XPSC select SND_SOC_AU1XPSC_AC97 select SND_SOC_AC97_CODEC + select SND_SOC_AU1XPSC_I2S + select SND_SOC_WM8731 help - This is a sample AC97 sound machine for use in Au12x0/Au1550 - based systems which have audio on PSC1 (e.g. Db1200 demoboard). + Select this option to enable audio (AC97 or I2S) on the + Alchemy/AMD/RMI DB1200 demoboard. diff --git a/sound/soc/au1x/Makefile b/sound/soc/au1x/Makefile index 6c6950b8003..16873076e8c 100644 --- a/sound/soc/au1x/Makefile +++ b/sound/soc/au1x/Makefile @@ -8,6 +8,6 @@ obj-$(CONFIG_SND_SOC_AU1XPSC_I2S) += snd-soc-au1xpsc-i2s.o obj-$(CONFIG_SND_SOC_AU1XPSC_AC97) += snd-soc-au1xpsc-ac97.o # Boards -snd-soc-sample-ac97-objs := sample-ac97.o +snd-soc-db1200-objs := db1200.o -obj-$(CONFIG_SND_SOC_SAMPLE_PSC_AC97) += snd-soc-sample-ac97.o +obj-$(CONFIG_SND_SOC_DB1200) += snd-soc-db1200.o diff --git a/sound/soc/au1x/db1200.c b/sound/soc/au1x/db1200.c new file mode 100644 index 00000000000..cdf7be1b9b9 --- /dev/null +++ b/sound/soc/au1x/db1200.c @@ -0,0 +1,141 @@ +/* + * DB1200 ASoC audio fabric support code. + * + * (c) 2008-9 Manuel Lauss + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "../codecs/ac97.h" +#include "../codecs/wm8731.h" +#include "psc.h" + +/*------------------------- AC97 PART ---------------------------*/ + +static struct snd_soc_dai_link db1200_ac97_dai = { + .name = "AC97", + .stream_name = "AC97 HiFi", + .cpu_dai = &au1xpsc_ac97_dai, + .codec_dai = &ac97_dai, +}; + +static struct snd_soc_card db1200_ac97_machine = { + .name = "DB1200_AC97", + .dai_link = &db1200_ac97_dai, + .num_links = 1, + .platform = &au1xpsc_soc_platform, +}; + +static struct snd_soc_device db1200_ac97_devdata = { + .card = &db1200_ac97_machine, + .codec_dev = &soc_codec_dev_ac97, +}; + +/*------------------------- I2S PART ---------------------------*/ + +static int db1200_i2s_startup(struct snd_pcm_substream *substream) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->dai->codec_dai; + struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai; + int ret; + + /* WM8731 has its own 12MHz crystal */ + snd_soc_dai_set_sysclk(codec_dai, WM8731_SYSCLK, + 12000000, SND_SOC_CLOCK_IN); + + /* codec is bitclock and lrclk master */ + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_LEFT_J | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + goto out; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_LEFT_J | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret < 0) + goto out; + + ret = 0; +out: + return ret; +} + +static struct snd_soc_ops db1200_i2s_wm8731_ops = { + .startup = db1200_i2s_startup, +}; + +static struct snd_soc_dai_link db1200_i2s_dai = { + .name = "WM8731", + .stream_name = "WM8731 PCM", + .cpu_dai = &au1xpsc_i2s_dai, + .codec_dai = &wm8731_dai, + .ops = &db1200_i2s_wm8731_ops, +}; + +static struct snd_soc_card db1200_i2s_machine = { + .name = "DB1200_I2S", + .dai_link = &db1200_i2s_dai, + .num_links = 1, + .platform = &au1xpsc_soc_platform, +}; + +static struct snd_soc_device db1200_i2s_devdata = { + .card = &db1200_i2s_machine, + .codec_dev = &soc_codec_dev_wm8731, +}; + +/*------------------------- COMMON PART ---------------------------*/ + +static struct platform_device *db1200_asoc_dev; + +static int __init db1200_audio_load(void) +{ + int ret; + + ret = -ENOMEM; + db1200_asoc_dev = platform_device_alloc("soc-audio", -1); + if (!db1200_asoc_dev) + goto out; + + /* DB1200 board setup set PSC1MUX to preferred audio device */ + if (bcsr_read(BCSR_RESETS) & BCSR_RESETS_PSC1MUX) + platform_set_drvdata(db1200_asoc_dev, &db1200_i2s_devdata); + else + platform_set_drvdata(db1200_asoc_dev, &db1200_ac97_devdata); + + db1200_ac97_devdata.dev = &db1200_asoc_dev->dev; + db1200_i2s_devdata.dev = &db1200_asoc_dev->dev; + ret = platform_device_add(db1200_asoc_dev); + + if (ret) { + platform_device_put(db1200_asoc_dev); + db1200_asoc_dev = NULL; + } +out: + return ret; +} + +static void __exit db1200_audio_unload(void) +{ + platform_device_unregister(db1200_asoc_dev); +} + +module_init(db1200_audio_load); +module_exit(db1200_audio_unload); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("DB1200 ASoC audio support"); +MODULE_AUTHOR("Manuel Lauss"); diff --git a/sound/soc/au1x/sample-ac97.c b/sound/soc/au1x/sample-ac97.c deleted file mode 100644 index 27683eb7905..00000000000 --- a/sound/soc/au1x/sample-ac97.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * Sample Au12x0/Au1550 PSC AC97 sound machine. - * - * Copyright (c) 2007-2008 Manuel Lauss - * - * This program is free software; you can redistribute it and/or modify - * it under the terms outlined in the file COPYING at the root of this - * source archive. - * - * This is a very generic AC97 sound machine driver for boards which - * have (AC97) audio at PSC1 (e.g. DB1200 demoboards). - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../codecs/ac97.h" -#include "psc.h" - -static int au1xpsc_sample_ac97_init(struct snd_soc_codec *codec) -{ - snd_soc_dapm_sync(codec); - return 0; -} - -static struct snd_soc_dai_link au1xpsc_sample_ac97_dai = { - .name = "AC97", - .stream_name = "AC97 HiFi", - .cpu_dai = &au1xpsc_ac97_dai, /* see psc-ac97.c */ - .codec_dai = &ac97_dai, /* see codecs/ac97.c */ - .init = au1xpsc_sample_ac97_init, - .ops = NULL, -}; - -static struct snd_soc_card au1xpsc_sample_ac97_machine = { - .name = "Au1xxx PSC AC97 Audio", - .dai_link = &au1xpsc_sample_ac97_dai, - .num_links = 1, -}; - -static struct snd_soc_device au1xpsc_sample_ac97_devdata = { - .card = &au1xpsc_sample_ac97_machine, - .platform = &au1xpsc_soc_platform, /* see dbdma2.c */ - .codec_dev = &soc_codec_dev_ac97, -}; - -static struct resource au1xpsc_psc1_res[] = { - [0] = { - .start = CPHYSADDR(PSC1_BASE_ADDR), - .end = CPHYSADDR(PSC1_BASE_ADDR) + 0x000fffff, - .flags = IORESOURCE_MEM, - }, - [1] = { -#ifdef CONFIG_SOC_AU1200 - .start = AU1200_PSC1_INT, - .end = AU1200_PSC1_INT, -#elif defined(CONFIG_SOC_AU1550) - .start = AU1550_PSC1_INT, - .end = AU1550_PSC1_INT, -#endif - .flags = IORESOURCE_IRQ, - }, - [2] = { - .start = DSCR_CMD0_PSC1_TX, - .end = DSCR_CMD0_PSC1_TX, - .flags = IORESOURCE_DMA, - }, - [3] = { - .start = DSCR_CMD0_PSC1_RX, - .end = DSCR_CMD0_PSC1_RX, - .flags = IORESOURCE_DMA, - }, -}; - -static struct platform_device *au1xpsc_sample_ac97_dev; - -static int __init au1xpsc_sample_ac97_load(void) -{ - int ret; - -#ifdef CONFIG_SOC_AU1200 - unsigned long io; - - /* modify sys_pinfunc for AC97 on PSC1 */ - io = au_readl(SYS_PINFUNC); - io |= SYS_PINFUNC_P1C; - io &= ~(SYS_PINFUNC_P1A | SYS_PINFUNC_P1B); - au_writel(io, SYS_PINFUNC); - au_sync(); -#endif - - ret = -ENOMEM; - - /* setup PSC clock source for AC97 part: external clock provided - * by codec. The psc-ac97.c driver depends on this setting! - */ - au_writel(PSC_SEL_CLK_SERCLK, PSC1_BASE_ADDR + PSC_SEL_OFFSET); - au_sync(); - - au1xpsc_sample_ac97_dev = platform_device_alloc("soc-audio", -1); - if (!au1xpsc_sample_ac97_dev) - goto out; - - au1xpsc_sample_ac97_dev->resource = - kmemdup(au1xpsc_psc1_res, sizeof(struct resource) * - ARRAY_SIZE(au1xpsc_psc1_res), GFP_KERNEL); - au1xpsc_sample_ac97_dev->num_resources = ARRAY_SIZE(au1xpsc_psc1_res); - au1xpsc_sample_ac97_dev->id = 1; - - platform_set_drvdata(au1xpsc_sample_ac97_dev, - &au1xpsc_sample_ac97_devdata); - au1xpsc_sample_ac97_devdata.dev = &au1xpsc_sample_ac97_dev->dev; - ret = platform_device_add(au1xpsc_sample_ac97_dev); - - if (ret) { - platform_device_put(au1xpsc_sample_ac97_dev); - au1xpsc_sample_ac97_dev = NULL; - } - -out: - return ret; -} - -static void __exit au1xpsc_sample_ac97_exit(void) -{ - platform_device_unregister(au1xpsc_sample_ac97_dev); -} - -module_init(au1xpsc_sample_ac97_load); -module_exit(au1xpsc_sample_ac97_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Au1xxx PSC sample AC97 machine"); -MODULE_AUTHOR("Manuel Lauss ");