From: Andrew Lunn Date: Wed, 6 Jan 2016 19:11:12 +0000 (+0100) Subject: phy: phy_{read|write}_mmd_indirect: get addr from phydev X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=053e7e169229adebbc27fc176c5369398e9f5eba;p=GitHub%2Fmoto-9609%2Fandroid_kernel_motorola_exynos9610.git phy: phy_{read|write}_mmd_indirect: get addr from phydev The address of the device can be determined from the phydev structure, rather than passing it as a parameter. Signed-off-by: Andrew Lunn Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/bcm-phy-lib.c b/drivers/net/phy/bcm-phy-lib.c index ddb377e53633..df0416db0b88 100644 --- a/drivers/net/phy/bcm-phy-lib.c +++ b/drivers/net/phy/bcm-phy-lib.c @@ -184,25 +184,25 @@ int bcm_phy_enable_eee(struct phy_device *phydev) /* Enable EEE at PHY level */ val = phy_read_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, - MDIO_MMD_AN, phydev->addr); + MDIO_MMD_AN); if (val < 0) return val; val |= LPI_FEATURE_EN | LPI_FEATURE_EN_DIG1000X; phy_write_mmd_indirect(phydev, BRCM_CL45VEN_EEE_CONTROL, - MDIO_MMD_AN, phydev->addr, (u32)val); + MDIO_MMD_AN, (u32)val); /* Advertise EEE */ val = phy_read_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV, - MDIO_MMD_AN, phydev->addr); + MDIO_MMD_AN); if (val < 0) return val; val |= (MDIO_AN_EEE_ADV_100TX | MDIO_AN_EEE_ADV_1000T); phy_write_mmd_indirect(phydev, BCM_CL45VEN_EEE_ADV, - MDIO_MMD_AN, phydev->addr, (u32)val); + MDIO_MMD_AN, (u32)val); return 0; } diff --git a/drivers/net/phy/dp83867.c b/drivers/net/phy/dp83867.c index 4ebf601073d9..e4c0b0c0af02 100644 --- a/drivers/net/phy/dp83867.c +++ b/drivers/net/phy/dp83867.c @@ -160,7 +160,7 @@ static int dp83867_config_init(struct phy_device *phydev) if ((phydev->interface >= PHY_INTERFACE_MODE_RGMII_ID) && (phydev->interface <= PHY_INTERFACE_MODE_RGMII_RXID)) { val = phy_read_mmd_indirect(phydev, DP83867_RGMIICTL, - DP83867_DEVADDR, phydev->addr); + DP83867_DEVADDR); if (phydev->interface == PHY_INTERFACE_MODE_RGMII_ID) val |= (DP83867_RGMII_TX_CLK_DELAY_EN | DP83867_RGMII_RX_CLK_DELAY_EN); @@ -172,13 +172,13 @@ static int dp83867_config_init(struct phy_device *phydev) val |= DP83867_RGMII_RX_CLK_DELAY_EN; phy_write_mmd_indirect(phydev, DP83867_RGMIICTL, - DP83867_DEVADDR, phydev->addr, val); + DP83867_DEVADDR, val); delay = (dp83867->rx_id_delay | (dp83867->tx_id_delay << DP83867_RGMII_TX_CLK_DELAY_SHIFT)); phy_write_mmd_indirect(phydev, DP83867_RGMIIDCTL, - DP83867_DEVADDR, phydev->addr, delay); + DP83867_DEVADDR, delay); } return 0; diff --git a/drivers/net/phy/microchip.c b/drivers/net/phy/microchip.c index c0a20ebd083b..99df5bc47424 100644 --- a/drivers/net/phy/microchip.c +++ b/drivers/net/phy/microchip.c @@ -78,10 +78,9 @@ static int lan88xx_probe(struct phy_device *phydev) priv->wolopts = 0; /* these values can be used to identify internal PHY */ - priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID, - 3, phydev->addr); + priv->chip_id = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_ID, 3); priv->chip_rev = phy_read_mmd_indirect(phydev, LAN88XX_MMD3_CHIP_REV, - 3, phydev->addr); + 3); phydev->priv = priv; diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 9771941cf0ee..56c8dd8c0c85 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -1029,7 +1029,6 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad, * @phydev: The PHY device bus * @prtad: MMD Address * @devad: MMD DEVAD - * @addr: PHY address on the MII bus * * Description: it reads data from the MMD registers (clause 22 to access to * clause 45) of the specified phy address. @@ -1039,10 +1038,10 @@ static inline void mmd_phy_indirect(struct mii_bus *bus, int prtad, int devad, * 3) Write reg 13 // MMD Data Command for MMD DEVAD * 3) Read reg 14 // Read MMD data */ -int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, - int devad, int addr) +int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad) { struct phy_driver *phydrv = phydev->drv; + int addr = phydev->addr; int value = -1; if (!phydrv->read_mmd_indirect) { @@ -1066,7 +1065,6 @@ EXPORT_SYMBOL(phy_read_mmd_indirect); * @phydev: The PHY device * @prtad: MMD Address * @devad: MMD DEVAD - * @addr: PHY address on the MII bus * @data: data to write in the MMD register * * Description: Write data from the MMD registers of the specified @@ -1078,9 +1076,10 @@ EXPORT_SYMBOL(phy_read_mmd_indirect); * 3) Write reg 14 // Write MMD data */ void phy_write_mmd_indirect(struct phy_device *phydev, int prtad, - int devad, int addr, u32 data) + int devad, u32 data) { struct phy_driver *phydrv = phydev->drv; + int addr = phydev->addr; if (!phydrv->write_mmd_indirect) { struct mii_bus *bus = phydev->bus; @@ -1130,7 +1129,7 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) /* First check if the EEE ability is supported */ eee_cap = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE, - MDIO_MMD_PCS, phydev->addr); + MDIO_MMD_PCS); if (eee_cap <= 0) goto eee_exit_err; @@ -1142,12 +1141,12 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) * the EEE advertising registers. */ eee_lp = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE, - MDIO_MMD_AN, phydev->addr); + MDIO_MMD_AN); if (eee_lp <= 0) goto eee_exit_err; eee_adv = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, - MDIO_MMD_AN, phydev->addr); + MDIO_MMD_AN); if (eee_adv <= 0) goto eee_exit_err; @@ -1161,15 +1160,13 @@ int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable) * clock while it is signaling LPI. */ int val = phy_read_mmd_indirect(phydev, MDIO_CTRL1, - MDIO_MMD_PCS, - phydev->addr); + MDIO_MMD_PCS); if (val < 0) return val; val |= MDIO_PCS_CTRL1_CLKSTOP_EN; phy_write_mmd_indirect(phydev, MDIO_CTRL1, - MDIO_MMD_PCS, phydev->addr, - val); + MDIO_MMD_PCS, val); } return 0; /* EEE supported */ @@ -1188,8 +1185,7 @@ EXPORT_SYMBOL(phy_init_eee); */ int phy_get_eee_err(struct phy_device *phydev) { - return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR, - MDIO_MMD_PCS, phydev->addr); + return phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_WK_ERR, MDIO_MMD_PCS); } EXPORT_SYMBOL(phy_get_eee_err); @@ -1206,22 +1202,19 @@ int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data) int val; /* Get Supported EEE */ - val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE, - MDIO_MMD_PCS, phydev->addr); + val = phy_read_mmd_indirect(phydev, MDIO_PCS_EEE_ABLE, MDIO_MMD_PCS); if (val < 0) return val; data->supported = mmd_eee_cap_to_ethtool_sup_t(val); /* Get advertisement EEE */ - val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, - MDIO_MMD_AN, phydev->addr); + val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN); if (val < 0) return val; data->advertised = mmd_eee_adv_to_ethtool_adv_t(val); /* Get LP advertisement EEE */ - val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE, - MDIO_MMD_AN, phydev->addr); + val = phy_read_mmd_indirect(phydev, MDIO_AN_EEE_LPABLE, MDIO_MMD_AN); if (val < 0) return val; data->lp_advertised = mmd_eee_adv_to_ethtool_adv_t(val); @@ -1241,8 +1234,7 @@ int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data) { int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised); - phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, - phydev->addr, val); + phy_write_mmd_indirect(phydev, MDIO_AN_EEE_ADV, MDIO_MMD_AN, val); return 0; } diff --git a/include/linux/phy.h b/include/linux/phy.h index 5f5cc3424b9e..08198ce98773 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -629,14 +629,12 @@ static inline int phy_read_mmd(struct phy_device *phydev, int devad, u32 regnum) * phy_read_mmd_indirect - reads data from the MMD registers * @phydev: The PHY device bus * @prtad: MMD Address - * @devad: MMD DEVAD * @addr: PHY address on the MII bus * * Description: it reads data from the MMD registers (clause 22 to access to * clause 45) of the specified phy address. */ -int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, - int devad, int addr); +int phy_read_mmd_indirect(struct phy_device *phydev, int prtad, int devad); /** * phy_read - Convenience function for reading a given PHY register @@ -735,14 +733,13 @@ static inline int phy_write_mmd(struct phy_device *phydev, int devad, * @phydev: The PHY device * @prtad: MMD Address * @devad: MMD DEVAD - * @addr: PHY address on the MII bus * @data: data to write in the MMD register * * Description: Write data from the MMD registers of the specified * phy address. */ void phy_write_mmd_indirect(struct phy_device *phydev, int prtad, - int devad, int addr, u32 data); + int devad, u32 data); struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, bool is_c45,