From: Ramalingam C Date: Tue, 19 Apr 2016 08:18:14 +0000 (+0530) Subject: drm/i915/bxt: Adjusting the error in horizontal timings retrieval X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=042ab0c3c40be1efcaad6b526173b5536fc6c3bf;p=GitHub%2FLineageOS%2Fandroid_kernel_motorola_exynos9610.git drm/i915/bxt: Adjusting the error in horizontal timings retrieval In BXT DSI there is no regs programmed with few horizontal timings in Pixels but txbyteclkhs.. So retrieval process adds some ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs. Actually here for the given adjusted_mode, we are calculating the value programmed to the port and then back to the horizontal timing param in pixels. This is the expected value at the end of get_config, including roundup errors. And if that is same as retrieved value from port, then retrieved (HW state) adjusted_mode's horizontal timings are corrected to match with SW state to nullify the errors. Signed-off-by: Ramalingam C Acked-by: Daniel Vetter Acked-by: Ville Syrjälä Signed-off-by: Jani Nikula Link: http://patchwork.freedesktop.org/patch/msgid/1461053894-5058-2-git-send-email-ramalingam.c@intel.com --- diff --git a/drivers/gpu/drm/i915/intel_dsi.c b/drivers/gpu/drm/i915/intel_dsi.c index 3d786005de88..40e465b5aa78 100644 --- a/drivers/gpu/drm/i915/intel_dsi.c +++ b/drivers/gpu/drm/i915/intel_dsi.c @@ -46,6 +46,14 @@ static const struct { }, }; +/* return pixels in terms of txbyteclkhs */ +static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count, + u16 burst_mode_ratio) +{ + return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio, + 8 * 100), lane_count); +} + /* return pixels equvalent to txbyteclkhs */ static u16 pixels_from_txbyteclkhs(u16 clk_hs, int bpp, int lane_count, u16 burst_mode_ratio) @@ -789,11 +797,19 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder, struct drm_i915_private *dev_priv = dev->dev_private; struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode; + struct drm_display_mode *adjusted_mode_sw; + struct intel_crtc *intel_crtc; struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); unsigned int lane_count = intel_dsi->lane_count; unsigned int bpp, fmt; enum port port; u16 hactive, hfp, hsync, hbp, vfp, vsync, vbp; + u16 hfp_sw, hsync_sw, hbp_sw; + u16 crtc_htotal_sw, crtc_hsync_start_sw, crtc_hsync_end_sw, + crtc_hblank_start_sw, crtc_hblank_end_sw; + + intel_crtc = to_intel_crtc(encoder->base.crtc); + adjusted_mode_sw = &intel_crtc->config->base.adjusted_mode; /* * Atleast one port is active as encoder->get_config called only if @@ -857,8 +873,79 @@ static void bxt_dsi_get_pipe_config(struct intel_encoder *encoder, adjusted_mode->crtc_vsync_end = vsync + adjusted_mode->crtc_vsync_start; adjusted_mode->crtc_vblank_start = adjusted_mode->crtc_vdisplay; adjusted_mode->crtc_vblank_end = adjusted_mode->crtc_vtotal; -} + /* + * In BXT DSI there is no regs programmed with few horizontal timings + * in Pixels but txbyteclkhs.. So retrieval process adds some + * ROUND_UP ERRORS in the process of PIXELS<==>txbyteclkhs. + * Actually here for the given adjusted_mode, we are calculating the + * value programmed to the port and then back to the horizontal timing + * param in pixels. This is the expected value, including roundup errors + * And if that is same as retrieved value from port, then + * (HW state) adjusted_mode's horizontal timings are corrected to + * match with SW state to nullify the errors. + */ + /* Calculating the value programmed to the Port register */ + hfp_sw = adjusted_mode_sw->crtc_hsync_start - + adjusted_mode_sw->crtc_hdisplay; + hsync_sw = adjusted_mode_sw->crtc_hsync_end - + adjusted_mode_sw->crtc_hsync_start; + hbp_sw = adjusted_mode_sw->crtc_htotal - + adjusted_mode_sw->crtc_hsync_end; + + if (intel_dsi->dual_link) { + hfp_sw /= 2; + hsync_sw /= 2; + hbp_sw /= 2; + } + + hfp_sw = txbyteclkhs(hfp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hsync_sw = txbyteclkhs(hsync_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp_sw = txbyteclkhs(hbp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + + /* Reverse calculating the adjusted mode parameters from port reg vals*/ + hfp_sw = pixels_from_txbyteclkhs(hfp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hsync_sw = pixels_from_txbyteclkhs(hsync_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + hbp_sw = pixels_from_txbyteclkhs(hbp_sw, bpp, lane_count, + intel_dsi->burst_mode_ratio); + + if (intel_dsi->dual_link) { + hfp_sw *= 2; + hsync_sw *= 2; + hbp_sw *= 2; + } + + crtc_htotal_sw = adjusted_mode_sw->crtc_hdisplay + hfp_sw + + hsync_sw + hbp_sw; + crtc_hsync_start_sw = hfp_sw + adjusted_mode_sw->crtc_hdisplay; + crtc_hsync_end_sw = hsync_sw + crtc_hsync_start_sw; + crtc_hblank_start_sw = adjusted_mode_sw->crtc_hdisplay; + crtc_hblank_end_sw = crtc_htotal_sw; + + if (adjusted_mode->crtc_htotal == crtc_htotal_sw) + adjusted_mode->crtc_htotal = adjusted_mode_sw->crtc_htotal; + + if (adjusted_mode->crtc_hsync_start == crtc_hsync_start_sw) + adjusted_mode->crtc_hsync_start = + adjusted_mode_sw->crtc_hsync_start; + + if (adjusted_mode->crtc_hsync_end == crtc_hsync_end_sw) + adjusted_mode->crtc_hsync_end = + adjusted_mode_sw->crtc_hsync_end; + + if (adjusted_mode->crtc_hblank_start == crtc_hblank_start_sw) + adjusted_mode->crtc_hblank_start = + adjusted_mode_sw->crtc_hblank_start; + + if (adjusted_mode->crtc_hblank_end == crtc_hblank_end_sw) + adjusted_mode->crtc_hblank_end = + adjusted_mode_sw->crtc_hblank_end; +} static void intel_dsi_get_config(struct intel_encoder *encoder, struct intel_crtc_state *pipe_config) @@ -922,14 +1009,6 @@ static u16 txclkesc(u32 divider, unsigned int us) } } -/* return pixels in terms of txbyteclkhs */ -static u16 txbyteclkhs(u16 pixels, int bpp, int lane_count, - u16 burst_mode_ratio) -{ - return DIV_ROUND_UP(DIV_ROUND_UP(pixels * bpp * burst_mode_ratio, - 8 * 100), lane_count); -} - static void set_dsi_timings(struct drm_encoder *encoder, const struct drm_display_mode *adjusted_mode) {