From: Pali Rohár Date: Thu, 14 May 2015 11:16:37 +0000 (+0200) Subject: hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k X-Git-Url: https://git.stricted.de/?a=commitdiff_plain;h=039ae58503f3;p=GitHub%2FLineageOS%2FG12%2Fandroid_kernel_amlogic_linux-4.9.git hwmon: Allow to compile dell-smm-hwmon driver without /proc/i8k This patch splits CONFIG_I8K compile option to SENSORS_DELL_SMM and CONFIG_I8K. Option SENSORS_DELL_SMM is now used to enable compilation of dell-smm-hwmon driver and old CONFIG_I8K option to enable /proc/i8k interface in driver. So this change allows to compile dell-smm-hwmon driver without legacy /proc/i8k interface which is needed only for old Dell Inspirion models or for userspace i8kutils package. For backward compatibility when CONFIG_I8K is enabled then also SENSORS_DELL_SMM is enabled and so driver dell-smm-hwmon (with /proc/i8k) is compiled. Signed-off-by: Pali Rohár Signed-off-by: Greg Kroah-Hartman --- diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 226d5696e1d1..7b756b337926 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1055,24 +1055,19 @@ config TOSHIBA Say N otherwise. config I8K - tristate "Dell laptop support" + tristate "Dell i8k legacy laptop support" select HWMON + select SENSORS_DELL_SMM ---help--- - This adds a driver to safely access the System Management Mode - of the CPU on the Dell Inspiron 8000. The System Management Mode - is used to read cpu temperature and cooling fan status and to - control the fans on the I8K portables. + This option enables legacy /proc/i8k userspace interface in hwmon + dell-smm-hwmon driver. Character file /proc/i8k reports bios version, + temperature and allows controlling fan speeds of Dell laptops via + System Management Mode. For old Dell laptops (like Dell Inspiron 8000) + it reports also power and hotkey status. For fan speed control is + needed userspace package i8kutils. - This driver has been tested only on the Inspiron 8000 but it may - also work with other Dell laptops. You can force loading on other - models by passing the parameter `force=1' to the module. Use at - your own risk. - - For information on utilities to make use of this driver see the - I8K Linux utilities web site at: - - - Say Y if you intend to run this kernel on a Dell Inspiron 8000. + Say Y if you intend to run this kernel on old Dell laptops or want to + use userspace package i8kutils. Say N otherwise. config X86_REBOOTFIXUPS diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 25d9e72627e9..bc9d90b108d2 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -371,6 +371,17 @@ config SENSORS_DS1621 This driver can also be built as a module. If so, the module will be called ds1621. +config SENSORS_DELL_SMM + tristate "Dell laptop SMM BIOS hwmon driver" + depends on X86 + help + This hwmon driver adds support for reporting temperature of different + sensors and controls the fans on Dell laptops via System Management + Mode provided by Dell BIOS. + + When option I8K is also enabled this driver provides legacy /proc/i8k + userspace interface for i8kutils package. + config SENSORS_DA9052_ADC tristate "Dialog DA9052/DA9053 ADC" depends on PMIC_DA9052 diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 51533acfa01e..6cacd0ff06c3 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_SENSORS_ATXP1) += atxp1.o obj-$(CONFIG_SENSORS_CORETEMP) += coretemp.o obj-$(CONFIG_SENSORS_DA9052_ADC)+= da9052-hwmon.o obj-$(CONFIG_SENSORS_DA9055)+= da9055-hwmon.o +obj-$(CONFIG_SENSORS_DELL_SMM) += dell-smm-hwmon.o obj-$(CONFIG_SENSORS_DME1737) += dme1737.o obj-$(CONFIG_SENSORS_DS620) += ds620.o obj-$(CONFIG_SENSORS_DS1621) += ds1621.o @@ -156,7 +157,6 @@ obj-$(CONFIG_SENSORS_W83L785TS) += w83l785ts.o obj-$(CONFIG_SENSORS_W83L786NG) += w83l786ng.o obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o -obj-$(CONFIG_I8K) += dell-smm-hwmon.o obj-$(CONFIG_PMBUS) += pmbus/ diff --git a/drivers/hwmon/dell-smm-hwmon.c b/drivers/hwmon/dell-smm-hwmon.c index 65d314b0f197..2a808822af21 100644 --- a/drivers/hwmon/dell-smm-hwmon.c +++ b/drivers/hwmon/dell-smm-hwmon.c @@ -81,7 +81,7 @@ static uint i8k_fan_max = I8K_FAN_HIGH; MODULE_AUTHOR("Massimo Dal Zotto (dz@debian.org)"); MODULE_AUTHOR("Pali Rohár "); -MODULE_DESCRIPTION("Driver for accessing SMM BIOS on Dell laptops"); +MODULE_DESCRIPTION("Dell laptop SMM BIOS hwmon driver"); MODULE_LICENSE("GPL"); MODULE_ALIAS("i8k"); @@ -93,6 +93,7 @@ static bool ignore_dmi; module_param(ignore_dmi, bool, 0); MODULE_PARM_DESC(ignore_dmi, "Continue probing hardware even if DMI data does not match"); +#if IS_ENABLED(CONFIG_I8K) static bool restricted; module_param(restricted, bool, 0); MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set"); @@ -100,6 +101,7 @@ MODULE_PARM_DESC(restricted, "Allow fan control if SYS_ADMIN capability set"); static bool power_status; module_param(power_status, bool, 0600); MODULE_PARM_DESC(power_status, "Report power status in /proc/i8k"); +#endif static uint fan_mult; module_param(fan_mult, uint, 0); @@ -109,18 +111,6 @@ static uint fan_max; module_param(fan_max, uint, 0); MODULE_PARM_DESC(fan_max, "Maximum configurable fan speed (default: autodetect)"); -static int i8k_open_fs(struct inode *inode, struct file *file); -static long i8k_ioctl(struct file *, unsigned int, unsigned long); - -static const struct file_operations i8k_fops = { - .owner = THIS_MODULE, - .open = i8k_open_fs, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, - .unlocked_ioctl = i8k_ioctl, -}; - struct smm_regs { unsigned int eax; unsigned int ebx __packed; @@ -220,45 +210,6 @@ out: return rc; } -/* - * Read the Fn key status. - */ -static int i8k_get_fn_status(void) -{ - struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, }; - int rc; - - rc = i8k_smm(®s); - if (rc < 0) - return rc; - - switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) { - case I8K_FN_UP: - return I8K_VOL_UP; - case I8K_FN_DOWN: - return I8K_VOL_DOWN; - case I8K_FN_MUTE: - return I8K_VOL_MUTE; - default: - return 0; - } -} - -/* - * Read the power status. - */ -static int i8k_get_power_status(void) -{ - struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, }; - int rc; - - rc = i8k_smm(®s); - if (rc < 0) - return rc; - - return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY; -} - /* * Read the fan status. */ @@ -378,6 +329,51 @@ static int i8k_get_dell_signature(int req_fn) return regs.eax == 1145651527 && regs.edx == 1145392204 ? 0 : -1; } +#if IS_ENABLED(CONFIG_I8K) + +/* + * Read the Fn key status. + */ +static int i8k_get_fn_status(void) +{ + struct smm_regs regs = { .eax = I8K_SMM_FN_STATUS, }; + int rc; + + rc = i8k_smm(®s); + if (rc < 0) + return rc; + + switch ((regs.eax >> I8K_FN_SHIFT) & I8K_FN_MASK) { + case I8K_FN_UP: + return I8K_VOL_UP; + case I8K_FN_DOWN: + return I8K_VOL_DOWN; + case I8K_FN_MUTE: + return I8K_VOL_MUTE; + default: + return 0; + } +} + +/* + * Read the power status. + */ +static int i8k_get_power_status(void) +{ + struct smm_regs regs = { .eax = I8K_SMM_POWER_STATUS, }; + int rc; + + rc = i8k_smm(®s); + if (rc < 0) + return rc; + + return (regs.eax & 0xff) == I8K_POWER_AC ? I8K_AC : I8K_BATTERY; +} + +/* + * Procfs interface + */ + static int i8k_ioctl_unlocked(struct file *fp, unsigned int cmd, unsigned long arg) { @@ -528,6 +524,37 @@ static int i8k_open_fs(struct inode *inode, struct file *file) return single_open(file, i8k_proc_show, NULL); } +static const struct file_operations i8k_fops = { + .owner = THIS_MODULE, + .open = i8k_open_fs, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .unlocked_ioctl = i8k_ioctl, +}; + +static void __init i8k_init_procfs(void) +{ + /* Register the proc entry */ + proc_create("i8k", 0, NULL, &i8k_fops); +} + +static void __exit i8k_exit_procfs(void) +{ + remove_proc_entry("i8k", NULL); +} + +#else + +static inline void __init i8k_init_procfs(void) +{ +} + +static inline void __exit i8k_exit_procfs(void) +{ +} + +#endif /* * Hwmon interface @@ -750,8 +777,8 @@ static int __init i8k_init_hwmon(void) if (err >= 0) i8k_hwmon_flags |= I8K_HWMON_HAVE_FAN2; - i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "i8k", NULL, - i8k_groups); + i8k_hwmon_dev = hwmon_device_register_with_groups(NULL, "dell-smm", + NULL, i8k_groups); if (IS_ERR(i8k_hwmon_dev)) { err = PTR_ERR(i8k_hwmon_dev); i8k_hwmon_dev = NULL; @@ -976,33 +1003,24 @@ static int __init i8k_probe(void) static int __init i8k_init(void) { - struct proc_dir_entry *proc_i8k; int err; /* Are we running on an supported laptop? */ if (i8k_probe()) return -ENODEV; - /* Register the proc entry */ - proc_i8k = proc_create("i8k", 0, NULL, &i8k_fops); - if (!proc_i8k) - return -ENOENT; - err = i8k_init_hwmon(); if (err) - goto exit_remove_proc; + return err; + i8k_init_procfs(); return 0; - - exit_remove_proc: - remove_proc_entry("i8k", NULL); - return err; } static void __exit i8k_exit(void) { hwmon_device_unregister(i8k_hwmon_dev); - remove_proc_entry("i8k", NULL); + i8k_exit_procfs(); } module_init(i8k_init);